Even reversable for you crazies who want a backwards Numpad!*
*OLED will need to be trace cut and bodged if you want it to work backwards
Materials needed:
- 30x Kailh Hotswap Sockets (Technically optional, hotswap through holes are plated)
- 31x 1N4148 or SOD-123F Diodes
- 30x MX style switches
- 1x MJTP1117 Reset Switch
- 1x Pro Micro or equivilant (Pro Micro chip side up for normal orientation, bottom side up for reversed.)
- 3x 2u stabilizers
- 1x EC11 Rotary Encoder
- 1x SSD1306 OLED (Optional)
For the 3D Printable Case:
- 6x 6mm M2 standoffs
- 12x M2 4mm or 5mm screws
OLED and Rotary Encoder code would need to be added to the end of your keymap.c. Still working on a more official OLED config. Example code borrowed and tested as working from the RoMac+, and is located in "QMK Keyboard Folder/migitepad/keymaps/default/keymap.c". Also encluded a default hex file in the QMK Keyboard Folder.