Releasve V3.0

Changes since v2.2:

• Added nozzle diameter check on filament profiles
• Added 0.6n filament profiles
• 0.6n: Removed Deretract speed (similiar as Retract speed)
• 0.6n: Removed M221 flow rate in Start/End G-code (respect Filament multiplier instead)
• 0.6n: Adjusted retraction from 0.1mm to 0.6
• 0.6n: Added Lift Z 0.2mm
• 0.6n: Adjusted retract when toolchange from 2mm to 1mm
• 0.6n: Removed retract before travel
• 0.6n: Tuned Bridge flow ratio (from 0.95 to 1.4)
• 0.6n: Adjusted bridgespeed from 25mm/s to 15mm/s
• 0.6n: Activated option 'External perimeters first'
• 0.6n: Deactivated option 'Ensure vertical shell thickness'
• 0.6n: Adjusted Gap fill speed from 50mm/s to 25mm/s due to printer wobbling
• 0.6n: Adjusted infill overlap from 30% to 0%
• 0.6n: Removed max volumetric speed values
• 0.6n: Adjusted seam position to aligned
• 0.6n: Tuned support settings
• 0.6n: Adjusted printspeeds