The purpose of the script is to automatically generate and update IPv6 DNS host names on the OpenWrt/LEDE router, making access to devices by name (either IPv4 or IPv6) on your network a snap. It does this by creating a hosts file giving local DNS names to IPv6 addresses that IPv6 enabled devices took via SLAAC mechanism.
Rather than using clunky IP addresses (v4 or v6), devices on your network now become:
- router.lan
- mycomputer.lan
or simply
- router
- mycomputer
IPv6 addresses are difficult to remember. DNS provides an abstraction layer, so that IP addresses do not have to be memorized. There are at least three situations where this set up is useful:
-
When you need to trace some network activity through tcpdump or Realtime Connections page on LuCI and there are lots of IPv6 addresses there and you don't know who or what they belong to.
-
When your ISP delegates a dynamic IPv6 prefix. Using names to refer to hosts will help automatically updating firewall rules and AAAA address records for local hosts on a remote DDNS service.
-
When you are accessing your LAN hosts either locally or remotely through VPN. If the local and remote IPv4 subnets conflicts you can still use IPv6 ULA addresses (e.g FDxx:xxxx:...) to connect to your services. DNS names make this much easier.
When using ip6neigh, names are applied to local IPv6 hosts, rather than cryptic IPv6 addresses, such as shown in this OpenWrt Realtime Connections page:
-
Install dependencies,
curl
andip-full
# opkg update # opkg install curl ip-full
NOTE: Special procedure for LEDE systems: When using LEDE v17.01.0, the
ip-full
package needs to be upgraded to a newer build which has fixed the 'ip monitor' bug. For 17.01.x systems, please navigate to https://downloads.lede-project.org/snapshots/packages/ , find your platform directory, downloadip-full_4.4.0-X_platform.ipk
(where X corresponds to the latest version) and install it on the router. For OpenWrt 18.06.x install the package from 17.01.x by navigating to: http://downloads.openwrt.org/releases/17.01.6/packages/[arch]/base/.NOTE:
ip6neigh
(v 1.7.3) has been tested with OpenWrt 23.05.0rc4, and works well. However, the OUI database is now over 1 MB in size, and routers with less than 8MB of flash may run out of filesystem space. OpenWrt 23.05 requires routers to have 16MB of flash storage.
Example for the x86_64 platform:
```
# cd /tmp
# wget http://downloads.lede-project.org/snapshots/packages/x86_64/base/ip-full_4.4.0-10_x86_64.ipk
# opkg remove ip-full
# opkg install ip-full_4.4.0-10_x86_64.ipk
# rm ip-full_4.4.0-10_x86_64.ipk
```
**Hint:** When copying the download URL from your browser, change `https` to `http` like the example above to allow downloading without having to install CA certificates.
**OpenWrt** releases and LEDE since v17.01.**1** *do not require* upgrading the `ip-full` package version (normal installation by `opkg install ip-full` is enough).
-
Download the installer script script to /tmp on your router by running the following command:
# curl -k -o /tmp/ip6neigh-setup.sh https://raw.githubusercontent.com/AndreBL/ip6neigh/master/ip6neigh-setup.sh # chmod +x /tmp/ip6neigh-setup.sh
-
Change directory to /tmp, and run
ip6neigh-setup.sh install
# ./ip6neigh-setup.sh install Checking installer version... The installer script is up to date. Creating directory /usr/lib/ip6neigh/ Creating directory /usr/share/ip6neigh/ Downloading ip6neigh-setup.sh Downloading lib/ip6addr_functions.sh Downloading main/ip6neigh-svc.sh Downloading main/ip6neigh.sh Downloading etc/init.d/ip6neigh Downloading etc/hotplug.d/iface/30-ip6neigh Downloading etc/config/ip6neigh The downloaded example config file will be moved to /etc/config/ip6neigh.example. Removing directory tree /tmp/ip6neigh/ --- The installation was successful. --- Run the following command if you want to download an offline OUI lookup database: ip6neigh oui download Start ip6neigh with: ip6neigh start
-
(Optional) Edit your current dhcp config file /etc/config/dhcp for adding predefined SLAAC hosts.
Examples of predefined hosts at: dhcp
-
Start ip6neigh...
manually with
ip6neigh start
or on boot with
ip6neigh enable sync reboot
-
Use names instead of addresses for connecting to IPv6 hosts in your network.
A copy of the installer script will be available in /usr/bin/ after installation. ip6neigh can be uninstalled by passing the remove
parameter to the installer:
# ip6neigh-setup remove
Stopping ip6neigh...
Removing /tmp/hosts/ip6neigh
Removing /tmp/ip6neigh.cache
Removing /etc/hotplug.d/iface/30-ip6neigh
Removing /etc/init.d/ip6neigh
Removing /usr/bin/ip6neigh
Removing /usr/bin/ip6neigh-oui-download
Removing /usr/bin/ip6neigh-setup
Removing /usr/sbin/ip6neigh-svc.sh
Removing directory tree /usr/share/ip6neigh/
Removing directory tree /usr/lib/ip6neigh/
The config file /etc/config/ip6neigh was kept in place for future use. Please remove this file manually if you will not need it anymore.
Finished uninstalling ip6neigh.
It is possible to see the host file via the LuCI web interface by using luci-app-commands package.
-
Install by:
opkg update opkg install luci-app-commands
-
Once installed, add the following to /etc/config/luci
#ip6neigh commands config command option name 'IPv6 Neighbors' option command 'ip6neigh list active' config command option name 'ip6neigh log' option command 'ip6neigh logread'
-
Now log into the LuCI web interface:
- And Navigate to System->Custom Commands. Clicking on Run will display the host file:
-
Or run from CLI
# ip6neigh list active Chromecast fd32:197d:3022:1101:a677:33ff:fe52:45d2 Chromecast.GUA.lan 2804:7f5:f080:29a2:a677:33ff:fe52:45d2 Chromecast.LL.lan fe80::a677:33ff:fe52:45d2 Chromecast.TMP.GUA.lan 2804:7f5:f080:29a2:1dc9:ae37:c1fb:6bec Chromecast.TMP.lan fd32:197d:3022:1101:1dc9:ae37:c1fb:6bec Android-Andre fd32:197d:3022:1101:f6f5:24ff:fe9e:5ac7 Android-Andre.GUA.lan 2804:7f5:f080:29a2:f6f5:24ff:fe9e:5ac7 Android-Andre.LL.lan fe80::f6f5:24ff:fe9e:5ac7 Android-Andre.TMP.GUA.lan 2804:7f5:f080:29a2:7094:bdf0:4911:6bf9 Android-Andre.TMP.lan fd32:197d:3022:1101:7094:bdf0:4911:6bf9 Laptop fd32:197d:3022:1101:c4d7:e94:282d:60b1 Laptop.GUA.lan 2804:7f5:f080:29a2:c4d7:e94:282d:60b1 Laptop.LL.lan fe80::c4d7:e94:282d:60b1 Laptop.TMP.GUA.lan 2804:7f5:f080:29a2:a840:ce89:7c91:93bd Laptop.TMP.lan fd32:197d:3022:1101:4c62:38c9:247d:5b1f
ip6neigh
uses DNS labels, which can be thought of as subdomains for the top level domain lan
. Example DNS labels (in bold) that ip6neigh
use are:
- Computer.TMP.lan (a temporary address)
- Computer.LL.lan (a link-local address)
- Computer.TMP.GUA.lan (a temporary GUA)
- Computer (no DNS label applied, e.g. a non-temporary ULA)
DNS Labels used by ip6neigh
can be configured in /etc/config/ip6neigh
file.
The rule of thumb for configuring DNS labels is to clear with '0' the label for the scope of address that you consider as preferred for local connectivity, and give DNS labels for every other scope of address, providing unique names to all IPv6 addresses on the network. By default, ip6neigh will use simple names (with no label, such as Computer1) for non-temporary ULA addresses if the router's LAN interface has an ULA prefix. If no ULA prefix is present, ip6neigh will consider non-temporary GUA addresses as preferred for local connectivity and will give names without labels for them.
For normal operations, you won't need to do any custom configuration. However, ip6neigh
is more powerful than just doing DNS resolution for IPv6 hosts.
ip6neigh will discover new hosts on the LAN and assign them names. But you may want to predefine the common hosts or servers on your network. This can be done by editing the /etc/config/dhcp
file.
Predefined hosts are added to the /etc/config/dhcp
file using the following:
# Example 1: Devices that use standard EUI-64 interface identifiers (IIDs)
# for all scopes:
config host
option name 'Android-John'
#Copy the MAC address of the device.
option mac '1a:41:8e:83:66:74'
option slaac '1'
For Windows machines which do not use RFC 4862 EUI-64 SLAAC addressing (based on the MAC address):
# Example 2: Windows machines or other hosts that do not use EUI-64 IIDs, but
# use other static IIDs instead:
config host
option name 'Laptop-Paul'
#Copy the MAC address of the device.
option mac '2e:36:e7:85:d3:3b'
#Copy the interface identifier from the link-local address of
#of the device.
option slaac 'daa1:4554:747b:1f50'
Addresses with Stable (not Constant) Semantically Opaque IIDs (RFC 7217) cannot be currently added as predefined hosts (MacOS X 10.12, and iOS 10) if the prefix from the ISP is dynamic, as the host portion of the address (the IID) also changes when the prefix changes.
Dynamic DNS utilizes the ddns-scripts
package. In the usual case for IPv6, ddns-scripts is used to update the router's address into the AAAA record of an external DDNS service. ip6neigh
allows one to update the DDNS with an arbitrary internal host's address instead of the router's own address.
Providing there is a firewall rule to allow access to the internal host, then running an externally accessible IPv6 server (i.e. web, ftp, RDP) is feasible even when the delegated prefix if frequently changed by the ISP.
To accomplish this:
-
Set up the DDNS config at the router to obtain the Host IPv6 address via an external script. Set this script to be the ip6neigh command that will echo the intended host's GUA:
/usr/bin/ip6neigh addr MyServer.GUA.lan 1
Regardless of prefix changes, ip6neigh
will keep the IPv6 address up to date by name, and return the correct IPv6 address at the time of DDNS update.
When ISP changes the prefix, it can be challenging to update the firewall rules to permit external access. ip6neigh
can also support the dynamic updating of firewall rules, based on DNS names (which remain constant, even though the prefix changes).
To setup Dynamic Firewall access rules:
-
Set up predefined hosts (see above).
-
Edit /etc/firewall.user and add lines:
#ip6neigh touch /tmp/etc/firewall.ip6neigh ip6tables -N wan6_forwarding ip6tables -A forwarding_wan_rule -d 2000::/3 -j wan6_forwarding
-
Edit /etc/config/firewall and right after
config include option path '/etc/firewall.user'
add these two lines:
config include option path '/tmp/etc/firewall.ip6neigh'
-
Create your custom dynamic firewall script /root/ip6neigh_rules.sh using this template:
#!/bin/sh #Initialize the temp firewall script TMP_SCRIPT='/tmp/etc/firewall.ip6neigh' echo "ip6tables -F wan6_forwarding" > $TMP_SCRIPT #Create new rules for dynamic IPv6 addresses here. Example for accepting TCP connections on port 80 on a local server that identifies itself as 'Webserver' through DHCP. echo "ip6tables -A wan6_forwarding -d $(ip6neigh addr Webserver.GUA 1) -p tcp --dport 80 -j ACCEPT" >> $TMP_SCRIPT #Run the generated temp firewall script /bin/sh "$TMP_SCRIPT"
-
Add your /root/ip6neigh_rules.sh script to ip6neigh config file /etc/config/ip6neigh
list fw_script '/root/ip6neigh_rules.sh'
-
Restart the OpenWrt firewall and ip6neigh:
/etc/init.d/firewall restart ip6neigh restart
-
Wait a minute and check if the rules were successfully created:
root@OpenWrt:~# ip6tables -L wan6_forwarding Chain wan6_forwarding (1 references) target prot opt source destination ACCEPT tcp anywhere Webserver.GUA.lan tcp dpt:www
Included is a versatile tool called ip6neigh
which controls most of the functions, starting, stopping, as well as an aid in troubleshooting.
# ip6neigh
ip6neigh Command Line Script
Usage: /usr/bin/ip6neigh COMMAND ...
Command list:
{ start | restart | stop }
{ enable | disable }
list [ all | static | discovered | active | host HOSTNAME ]
name { ADDRESS }
address { FQDN } [ 1 ]
mac { HOSTNAME | ADDRESS }
oui { MAC | download }
resolve { FQDN | ADDRESS }
whois { HOSTNAME | ADDRESS | MAC }
logread [ REGEX ]
--version Print version information and exit.
Typing shortcuts: rst lst sta dis act hst addr downl res who whos log
ip6neigh
options include:
list [ all | static | discovered | active | host HOSTNAME ]
With no extra argument: Shows all entries in the hosts file, with comments and blank line.all
Displays all entries in hosts file without comments or blank lines. May be used for scripting purposes.static
Displays the static entries in the host file.discovered
Displays the dynamically discovered hosts in the host file.active
Displays the entries that have REACHABLE or STALE NUD status in the router's neighbors table. Helps to find out which hosts have been recently online on the network.host HOSTNAME
Displays the entries that are related to a single host device.
name { ADDRESS }
Displays the FQDN (Fully Qualified Domain Name) for the IPv6 address. Depending on the user configuration in/etc/config/ip6neigh
, the top level domain will not appear if the host has no DNS label.address { NAME } [ 1 ]
Returns the IPv6 addresses for the FQDN. The top level domain name (e.g. 'lan') may be optionally omitted for convenience. Input examples: Laptop, Laptop.GUA, Laptop.GUA.lan, Laptop.TMP- This command has a clean output for external scripting, like supplying the address to DDNS Scripts or to a custom firewall script that generates rules for GUAs based on names because ISP is issuing a dynamic prefix.
It is possible that hosts will have multiple temp addresses and they will have the same FQDN. If the extra argument '1' is supplied, limits the output to the first address associated with that FQDN.
This command replaces
ip6neigh_ddns.sh
- This command has a clean output for external scripting, like supplying the address to DDNS Scripts or to a custom firewall script that generates rules for GUAs based on names because ISP is issuing a dynamic prefix.
It is possible that hosts will have multiple temp addresses and they will have the same FQDN. If the extra argument '1' is supplied, limits the output to the first address associated with that FQDN.
This command replaces
mac { NAME | ADDRESS }
Shows the MAC address for the host device or address. Clean output.oui { MAC | download }
Displays the manufacturer name for the supplied MAC address. If the argument is 'download', the local offline OUI database will be installed or updated.resolve { FQDN | ADDRESS }
Verbose style output for resolving FQDN to IPv6 addresses or IPv6 address to FQDN. The top level domain name (e.g. 'lan') may be optionally omitted cor convenience. Input examples for FQDN: Laptop, Laptop.GUA, Laptop.GUA.lan, Laptop.TMP ...whois { HOSTNAME | ADDRESS | MAC }
Displays host name information, related FQDN, MAC address and manufacturer info for the specified host, address or MAC.logread [ REGEX ]
Prints the ip6neigh log output, passing anything in the optional REGEX argument as the match string to grep command.--version
Displays version information.
ip6neigh
not only lists the discovered hosts, but also can do name resolution based on host name, IPv6 address or even MAC address. Some of the options (such as list, name and address) are specifically designed in assisting the user in other scripting projects, and therefore have very simple (easily parsed) output.
ip6neigh-svc.sh
can use an offline MAC address OUI lookup, if the file oui.gz
is present. This makes names more identifiable for clients which do not send their hostname (e.g. the Chromebook) when making a DHCP request.
To install, run ip6neigh oui download
command, which will install oui.gz for offline oui lookup.
# ip6neigh oui download
Downloading Nmap MAC prefixes...
Connecting to linuxnet.ca (24.222.55.20:80)
oui-raw.txt 100% |***********************************************************************| 552k 0:00:00 ETA
Applying filters...
Compressing database...
Moving the file...
The new compressed OUI database file was successfully moved to: /usr/share/ip6neigh/oui.gz
Hosts which do not send their hostname (e.g. Unknown-9BA.LL.lan) will now have an OUI manufacterer name as part of the host name, such as Speed-9BA.LL.lan (Speed is a Speed Dragon Multimedia Limited MAC device).
ip6neigh-svc.sh
should start up after step 6 above. You can check that it is running by typing
# ps | grep ip6negh
16727 root 1452 S {ip6neigh-svc.sh} /bin/sh /usr/sbin/ip6neigh-svc.sh -s
16773 root 1452 S {ip6neigh-svc.sh} /bin/sh /usr/sbin/ip6neigh-svc.sh -s
16775 root 1356 S grep ip6
You can also check the log file (enabled/disabled in /etc/config/ip6negh
)
# ip6neigh logread
Fri Dec 23 23:44:31 UTC 2016 Starting ip6neigh script for physdev br-lan with domain lan
Fri Dec 23 23:44:31 UTC 2016 Network does not have ULA prefix. Clearing label for GUAs.
Fri Dec 23 23:44:31 UTC 2016 Generating predefined SLAAC addresses for router
Fri Dec 23 23:44:41 UTC 2016 Added: alarm.LL.lan fe80::5048:e4ff:fe4d:a27d
Fri Dec 23 23:44:54 UTC 2016 Added: alarm.TMP.lan 2001:db8:ebbd:4:3466:322a:649a:7172
Fri Dec 23 23:44:54 UTC 2016 Probing other possible addresses for alarm: fe80::3466:322a:649a:7172 fe80::5048:e4ff:fe4d:a27d
..
Tue Dec 27 01:32:17 UTC 2016 Added: Unknown-01e0a4.LL.lan fe80::d69a:20ff:fe01:e0a4
Tue Dec 27 01:32:19 UTC 2016 Added: Unknown-01e0a4.TMP.lan 2001:db8:ebbd:4:1d82:c1c3:c2a3:d46b
Tue Dec 27 01:32:19 UTC 2016 Probing other possible addresses for Unknown-01e0a4: fe80::1d82:c1c3:c2a3:d46b fe80::d69a:20ff:fe01:e0a4
Tue Dec 27 01:32:20 UTC 2016 Added: hau 2001:db8:ebbd:4:d69a:20ff:fe01:e0a4
Tue Dec 27 01:32:20 UTC 2016 Probing other possible addresses for hau: fe80::d69a:20ff:fe01:e0a4
To list the hostnames detected by ip6neigh.
# ip6neigh list
#Predefined hosts
Router fd32:197d:3022:1101::1
Router.GUA.lan 2804:7f5:f080:29a2::1
Router.LL.lan fe80::c66e:1fff:fed6:18c4
#Discovered hosts
Laptop fd32:197d:3022:1101:c4d7:e94:282d:60b1
Laptop.GUA.lan 2804:7f5:f080:29a2:c4d7:e94:282d:60b1
Laptop.LL.lan fe80::c4d7:e94:282d:60b1
Laptop.TMP.GUA.lan 2804:7f5:f080:29a2:a840:ce89:7c91:93bd
Laptop.TMP.lan fd32:197d:3022:1101:4c62:38c9:247d:5b1f
One only needs to install ip-full
and curl
packages. It has been tested on the following router operating systems:
- OpenWrt Chaos Calmer v15.05.1
- OpenWrt Chaos Calmer v15.05
- LEDE v17.01.1
- LEDE v17.01.0 (requires upgrading ip-full package to v4.4.0-9 or later, from the snapshot build)
- OpenWrt v19.07 thru current (v23.05)
Additional dependency for 'snooping' mode is tcpdump
.
In order to use the LuCI web interface, one must install luci-app-commands
ip6neigh is designed to operate in a dual-stack network with both IPv4 and IPv6 running. It will collect host names and return them when queried by DNS.
ip6neigh relies on DHCPv4 client to report its hostname (option 12) or DHCPv6 client option 39. If the client does not report the hostname, then an "Unknown-XXX" name will be applied with XXX as the last three hex digits of the MAC address. If the offline MAC OUI lookup has been activated (by running the command ip6neigh oui download
), then the MAC OUI manufacturer name will be used instead of Unknown.
SLAAC addresses are discovered by three methods:
- Passively monitoring of changes in the reachability status of neighbors that occur in the router's IPv6 neighbors table.
- If package
tcpdump
is installed and option dad_snoop is set in /etc/config/ip6neigh, the script will listen to Neighbor Solicitation (NS) messages that are part of the Duplicate Address Detection (DAD) process. The new addresses will be discovered as soon as their host joins the network. - After discovering any new addresses with the previous methods, ip6neigh will actively check if the host has took more addresses by guessing different Interface Identifiers (IID) that could match that same host and then sending NS messages to those guessed addresses.
Names for the discovered addresses will be learned or generated in the following order (and priority):
- Static hosts in /etc/config/dhcp
- DHCPv6 leases
- DHCPv4 leases
- OUI manufacturer-XXX
- simple Unknown-XXX names.
ip6neigh-svc.sh assumes that IPv6 subnets are /64 (which is what hosts should see in an IPv6 network for SLAAC to work). It also assumes DHCPv4 and SLAAC environments, but can also work in other environments (such as DHCPv6-only).
The script is written by André Lange. Suggestions, and additions are welcome. Acknowledgements to Craig Miller for debugging and documentation.
This project is open source, under the GPLv2 license (see LICENSE)