This is a ground up design of a Delta Kinematic based 3D Printer. The ethos of this printer is to keep costs as low as possible but have a rock solid frame as a base with a large print area.
Usable print area is 300mm diameter with a Z Height of around 200mm. The printer is Smoothieware based using the Azteeg X5 mini by Panucatt Devices, 24 volt electronics with a 230v heated bed
| © AxMod 3D Print 2017. |
|---|
| This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2. |
| You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions |