green-cli is a command line interface for the Blockstream Green wallet
To install the current release from PyPI using pip
:
pip install green-cli
We strongly recommend installing using the release hashes to ensure that the correct
package is installed. To do this, use the requirements.txt
file from the latest
release at https://github.com/Blockstream/green_cli/releases, and install with:
pip install --require-hashes -r requirements.txt
The default install supports the internal gdk software wallet and an external software
wallet which does not share its private keys with gdk (enabled via --auth wally
).
A jade
install variant is available with support for
the Blockstream Jade hardware wallet. This
can be installed using pip install green-cli[jade]
For Bitcoin HWI support you must manually
install HWI using pip install -r requirements-hwi.txt
with requirements-hwi.txt
from this repo, or following the instructions on the HWI repo.
Rather than installing green-cli locally you may find it easier to build and run it as a docker image. First build the image and optionally tag it for convenience:
docker build -t green-cli .
And then run like this:
docker run -it --rm green-cli ....
We pass -it
to run in an interactive terminal. Sometimes green-cli requires
interaction with the user.
We pass --rm
to delete the container once it has run to avoid having lots of
redundant containers lying around. This is optional.
For example, to create a new testnet wallet:
docker run -it --rm green-cli --network testnet create
As this is creating a new docker container each time it's invoked it's not
generally very useful as the mnemonic will be written inside the container and
will not persist across invocations. To persist the wallet state mount a docker
volume at /config
inside the container. This can either be a named docker
volume, e.g. -v green-cli:/config
, or some local directory e.g.
-v /path/to/config/dir:/config
. Care must be taken to manage the volume or
bind mount directory as it will be used to store the plaintext mnemonic (unless
you set a pin, in which case it only stores the mnemonic encrypted with a key
held by the pinserver).
Putting this altogether, using a testnet wallet and a named docker volume
green-cli
for the config, we have:
docker run -it --rm -v green-cli:/config green-cli --network testnet ...
This command is now quite unwieldy so it's useful to define a shell alias:
alias green-cli="docker run -it --rm -v green-cli:/config green-cli --network testnet"
With the alias defined green-cli can be invoked simply as:
green-cli create
green-cli getbalance
etc.
You can also avail yourself of the repl
command and avoid repeatedly creating
new containers for each command:
green-cli repl
> getnewaddress
green-cli itself is a python package which requires installation of the Green Deveopment Kit (GDK) as part of its requirements.
It's recommended that you first create and activate a python3 virtualenv and use that to install the green-cli. Instructions for that will depend on your platform, but might look something like this:
python3 -m virtualenv /path/to/venv/green-cli
Activate the virtualenv before proceeding with the installation steps below
. /path/to/venv/green-cli/bin/activate
Install the requirements:
$ pip install -r requirements.txt
Install green-cli itself:
$ pip install .
To enable support for the Blockstream Jade
hardware wallet (via the --auth jade
option) additional dependencies must
be installed from requirements-jade.txt.
- Install libudev and libusb. This is platform specific but for debian-based systems:
$ sudo apt-get install libudev-dev libusb-1.0-0-dev
- Install extra requirements
$ pip install -r requirements-jade.txt
NOTE: this must be two separate invocations, as the jade python api is installed from github sources, and does not have a sha hash.
You can now run green-cli passing the --auth jade
option.
Support for various hardware wallets can be enabled via hwi.
- Install libudev and libusb. This is platform specific but for debian-based systems:
$ sudo apt-get install libudev-dev libusb-1.0-0-dev
- Install extra requirements
$ pip install -r requirements-hwi.txt
You can now run green-cli passing the --auth hardware
option.
Log in to a testnet wallet and report the balance:
$ green-cli --network testnet set mnemonic -f /file/containing/testnet/mnemonics
$ green-cli --network testnet getbalance
Log in to a mainnet wallet and send 0.1 BTC to an address
$ green-cli --network mainnet set mnemonic "mainnet mnemonic here ..."
$ green-cli --network mainnet sendtoaddress $ADDR 0.1
Log in to a liquid wallet and send an asset to an address
$ green-cli --network liquid set mnemonic "liquid mnemonic here ..."
$ green-cli --network liquid sendtoaddress
NOTE: Wallet creation is currently only available on testnet networks.
If using the options --auth hardware
or --auth wally
it is possible to
override the default device capabilities sent to the GDK, using the
--auth-config
option and the device
key.
eg:
--auth hardware --auth-config '{"device": {"supports_low_r": true}}'
Note --auth-config
json data can also be passed in a text file:
--auth wally --auth-config hw_liquid_lowr.json
where the file contents are, eg:
{
"device": {
"supports_low_r": true,
"supports_liquid": 1
}
}
WARNING: Please note that green-cli in general and the tx/coin selection functions in particular are alpha software and not currently recommended for mainnet use. Loss of funds may occur.
You can create, inspect and modify a transaction using the tx
command.
Although you can issue individual tx
commands directly from the shell
it can be easier to use the green-cli's inbuilt repl shell when
interactively building transactions as it avoids the overhead of logging
in to green each time. Use the repl
command to start a repl session.
ctrl-d exits the session.
$ green-cli --network testnet repl
First, create a new 'scratch' transaction using the tx
command
> tx new
This creates a new temporary local transaction. At any time you can
start again by running tx new
which will discard the scratch tx and
create a new one.
Add an output to the transaction.
> tx outputs add mkHS9ne12qx9pS9VojpwU5xtRd4T7X7ZUt 1000
Use tx outputs
to show the current outputs
> tx outputs
1000 mkHS9ne12qx9pS9VojpwU5xtRd4T7X7ZUt
By default tx outputs
does not show change outputs. Pass -a
to show
all outputs, including change, or '-c' to show only change outputs.
Change outputs are shown in green.
> tx outputs -a
996380 2N1txpptYbDvCd5RF8jR3ERzRdEWyWVyWZB
1000 mkHS9ne12qx9pS9VojpwU5xtRd4T7X7ZUt
> tx outputs -c
996380 2N1txpptYbDvCd5RF8jR3ERzRdEWyWVyWZB
At any point you can print a summary of the using the tx
command.
> tx
send all: False
utxo strategy: default
available inputs: 1787590
selected inputs: 997590
total outputs: 1000
change: 996380
size: 381
vsize: 210
weight: 837
fee: 210
fee rate: 1000 sat/kb
Note that 'utxo strategy' is 'default', which means the transaction
inputs have been automatically selected. Use tx inputs
to see the
selected inputs.
> tx inputs
997590 86b29eeed79ad3fe977f49c37fd7cc415887b422892ad943187196fec019e5c4:1 csv 1005 confs 2N9aB1hjFrQrauVxDqwugVqtFeQNgHd8ptN
Pass -u
to see available unused inputs, or -a
to see all inputs,
selected and available. Unselected inputs show in red.
> tx inputs -u
660000 bbe2c68e8af9e777988823682f4ecc59ab3c94bcaf42c50aba99016f868f0ebd:0 csv 205 confs 2N1VynvdyXKadB8fWLmmKbEQe46n1YALHmj
30000 c6b84a5ab4fbd6ee963e165aed36bd5a40c7aadede818be79b8445f3992f0031:1 csv 205 confs 2N3cq3JVs7RZrVqpHUnk8VFRsZPV7iYr5qT
100000 0c0863f5ab4e11c6844b25b2883a4056be8f245aa2da09e34b54d8a61b840d26:1 csv 205 confs 2NDky839U4fqR19y6Lz7xLSGEitHjqJvSqA
Automatic coin selection can be overridden using the tx inputs
command. Use tx inputs clear
to remove all selected inputs.
> tx inputs clear
> tx inputs
Use tx inputs add
to add inputs. You can pass either an address, or a
transaction id, or a transaction id + vout. If you pass an address all
utxos for that address will be selected. If you pass a transaction id
without a vout index any utxos from that transaction will be selected.
You can also use '*' as a wildcard.
> tx inputs add 86b29eeed79ad3fe977f49c37fd7cc415887b422892ad943187196fec019e5c4
> tx inputs add bbe2c68e8af9e777988823682f4ecc59ab3c94bcaf42c50aba99016f868f0ebd:0
> tx inputs add 2NDky839U4fqR19y6Lz7xLSGEitHjqJvSqA
> tx inputs add *
tx inputs and outputs can be cleared using tx inputs clear
and tx outputs clear
, or individually removed using tx inputs rm
and tx outputs rm
You can add an output which consumes all of the available inputs, less
the fee, by specifying 'all' as the amount. Before doing so, if
necessary either create a new transaction or use tx outputs clear
.
Once an 'all' output is set the inputs can be manually selected as usual
and the amount paid to the output will automatically adjust such that
there is no change.
> tx outputs clear
> tx outputs add mkHS9ne12qx9pS9VojpwU5xtRd4T7X7ZUt all
Using tx outputs -a
shows there are no change outputs, and this
confirmed by the summary.
> tx outputs -a
1757147 mkHS9ne12qx9pS9VojpwU5xtRd4T7X7ZUt
> tx
user signed: False
server signed: False
send all: True
utxo strategy: manual
available inputs: 1757590
selected inputs: 1757590
total outputs: 1757147
change: 0
size: 955
vsize: 443
weight: 1771
fee: 443
fee rate: 1000 sat/kb
You can set the feerate by calling tx setfeerate
. The fee rate is
specified in satoshis per kilobyte.
When the transaction is ready, use tx sign
and tx send
. Before
signing and sending a transaction it is strongly recommended that you
use tx raw
and inspect the raw transaction, for example by passing it
to bitcoin-cli decoderawtransaction
, to ensure the details are as
expected.
> tx sign
> tx send
d425b376ab69969668011a29638bcf3aad507da3d9adecd4a241cb2b1f6684ba