Create BOM.md

BOM.md

@@ -0,0 +1,26 @@
+# BOM
+
+## Molex Micro Fit:
+  Cables: 20x Molex 214760-1225 (If making your own cables, 18 AWG cable is recommended, but minimum is 20 AWG, though is not recommended, these are a PAIN to crimp)
+
+    Mouser: https://www.mouser.com/ProductDetail/538-214760-1225
+    DigiKey: https://www.digikey.com/en/products/detail/wec/214760-1225/14693154
+
+  Cable Housing: 2x Molex 43025-2008 OR 43205-2010 (Either works, does not matter)
+
+    Mouser: https://www.mouser.com/ProductDetail/538-43025-2008
+    DigiKey: https://www.digikey.com/en/products/detail/molex/0430252008/4693200
+ Board Header: 2x Molex 43045-2001
+
+    Mouser: https://www.mouser.com/ProductDetail/538-43045-2001
+    Digikey:https://www.digikey.com/en/products/detail/molex/0430452001/3044584
+
+## JST
+  Connectors + Headers: JST-XH set (Good to have)
+
+    Adafruit: https://www.adafruit.com/product/4423
+
+## Terminal Blocks
+  Terminal block: Phoenix Contact 1725656 (As long as it's 2.54mm pitch, though I want to make it bigger in the future)
+
+    Mouser: https://www.mouser.com/ProductDetail/651-1725656