Ansible Site for Managing MOC/OCT Switches

Ansible site for MOC/OCT switches

Supported Switch OSes

• Dell OS9 (FTOS9)

Site Setup

1. Install newest version of ansible
2. Install required PyPI packages:
   1. pip install --user ansible-pylibssh
3. Install the required ansible modules: ansible-galaxy collection install -r requirements.yaml
4. Set up AWS CLI and be sure you can access the correct secrets
5. On your client, you may have to enable legacy kex algorithms for some switches:

   KexAlgorithms +diffie-hellman-group1-sha1,diffie-hellman-group14-sha1
   

Configuration

Interfaces

Interfaces are configured in the file host_vars/HOST/interfaces.yaml

An example of this file is below:

interfaces:
  twentyFiveGigE 1/1:
    description: "example interface"
    state: "up"
    mtu: 9216
  Port-channel 1:
    state: "up"
    lag-members:
      - "hundredGigE 1/1"
      - "hundredGigE 1/2"
    portmode: "access"
    untagged: 10
  Vlan 207:
    state: "up"
    ip4: "10.10.10.10/20"

Available Fields

• name Only for VLANs, sets the name of interfaces. (String)
• description Sets the description of the interface. (String)
• state Sets the admin state of the mode ("up", or "down")
• mtu Sets the MTU of the interface (Integer 576-9416)
• fec If false, forward-error-correction is disabled on the interface (Boolean)
• autoneg If false, auto-negotiation is disabled on the interface (Boolean)
• stp Sets STP Parameters
  • edgeport Sets whether port should be an edge port (Boolean)
  • bpduguard Enables BPDUguard on an interface (Boolean)
  • rootguard Enables Rootguard on an interface (Boolean)
  • disabled Disables STP on the interface (Boolean)
• fanout Sets fanout configuration
  • mode Sets mode (single, dual, or quad)
  • speed Sets the fanout speed (10G, 25G, or 40G)
• managed If true, this interface will not be configured by ansible. Works for both VLANs and interfaces (Boolean)
• portmode L2 portmode of an interface (String "access", "trunk", or "hybrid")
• untagged Single vlan to untag, requires portmode access or hybrid (Integer 2-4094)
• tagged List of vlans to tag, requires portmode trunk or hybrid (List of Integers 2-4094)
• ip4 Sets the IPv4 address of the interface (String "X.X.X.X/YY")
• ip6 Sets the IPv6 address of the interface (String)
• lag-members List of non-LACP lag members for a port channel (List of Strings, interface names)
• lacp-members-active List of LACP active members for a port channel (List of Strings, interface names)
• lacp-members-passive List of LACP passive members for a port channel (List of Strings, interface names)
• lacp-rate Sets the switch rate for LACP only (String "fast" or "slow")
• mlag Set the label of the peer port-channel for a paired switch (String interface name)

Switch Configuration

Switches will need some manual configuration before being able to be set up from this ansible site.

Dell OS9 Switches

1. On the switch, enter conf mode
2. Set the enable password: enable password <DEFAULT_OS9_PASSWD>
3. Set the ssh user username admin password <DEFAULT_OS9_PASSWD>
4. Enable ssh server ip ssh server enable
5. Set the access IP (usually managementethernet 1/1)