Skip to content
This repository has been archived by the owner on Dec 20, 2019. It is now read-only.

Control digital LEDs (WS2812B like) using ESP32's RMT peripheral and ESP-IDF RMT driver

License

Notifications You must be signed in to change notification settings

CalinRadoni/esp32_digitalLEDs

Repository files navigation

esp32_digitalLEDs

Note

This repository is archived because I have built a better version.

The new version is converted to C++ and is splitted in these esp-idf components:

Description

Controls WS2812B type digital LEDs using the RMT peripheral of ESP32.

This implementation uses the RMT driver from ESP-IDF and uses one RMT channel for a LED strip leaving the other channels free, under the control of the RMT driver. Here are some key points of this implementation:

  • the control of the LEDs is separated from the control of the RMT peripheral;
  • the other RMT channels can be used as needed;
  • the RMT peripheral is used through ESP-IDF's own driver.

Right now the whole negative point is that this code uses a lot of RAM, because of the way the driver and peripheral works, but this will change if/when the driver will be updated with a hook in transmission code.

About timings

Timings are from datasheets. According to Worldsemi's datasheets there are a few timings sets:

  • one for WS2812
  • one for WS2812B, WS2812C, WS2812S, WS2813 and WS2815
  • one for WS2812D

In Tim's Blog (cpldcpu) are some interesting investigations about timings of various digital LEDs.

Dependencies

Espressif IoT Development Framework.

Hardware details

The code was tested using the following:

  • ESP32-DevKitC board
  • LED strip with 300 WS2812B digital LEDs
  • custom level convertor
  • good quality 5V power source

Development Environment

Main tools used where Espressif IoT Development Framework and ESP32 toolchain for Linux (see Standard Setup of Toolchain for Linux for the latest version).

Editing was done in Visual Studio Code but for shorter periods of time I have used Eclipse IDE for C/C++ Developers and Atom editor.

Version control with Git.

License

esp32_digitalLEDs's software and documentation is released under the GNU GPLv3 License. See the LICENSE-GPLv3.txt file.

esp32_digitalLEDs's hardware schematics are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. See the LICENSE-CC-BY-SA-4.0.txt file.

Mentions

I have tested the MartyMacGyver's ESP32-Digital-RGB-LED-Drivers. The code is working OK, but it captures the whole RMT peripheral because it uses its custom interrupt handler routine.

About

Control digital LEDs (WS2812B like) using ESP32's RMT peripheral and ESP-IDF RMT driver

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published