Introduction

Proton is a tool for use with the Steam client which allows games which are exclusive to Windows to run on the Linux operating system. It uses Wine to facilitate this.

Most users should use Proton provided by the Steam Client itself. See this Steam Community post for more details.

The source code is provided to enable advanced users the ability to alter Proton. For example, some users may wish to use a different version of Wine with a particular title.

The changelog is available on our wiki.

Obtaining Proton sources

Acquire Proton's source by cloning https://github.com/ValveSoftware/Proton and checking out the branch you desire.

You can clone the latest Proton to your system with this command:

git clone --recurse-submodules https://github.com/ValveSoftware/Proton.git proton

Be sure to update submodules when switching between branches:

git checkout experimental_6.3
git submodule update --init --recursive

If you want to change any subcomponent, now is the time to do so. For example, if you wish to make changes to Wine, you would apply them to the wine/ directory.

Building Proton

Most of Proton builds inside the Proton SDK container with very few dependencies on the host side.

Preparing the build environment

You need either a Docker or a Podman setup. We highly recommend the rootless Podman setup. Please refer to your distribution's documentation for setup instructions (e.g. Arch Podman / Docker, Debian Podman / Docker).

The Easy Way

We provide a top-level Makefile which will execute most of the build commands for you.

After checking out the repository and updating its submodules, assuming that you have a working Docker or Podman setup, you can build and install Proton with a simple:

make install

If your build system is missing dependencies, it will fail quickly with a clear error message.

After the build finishes, you may need to restart the Steam client to see the new Proton tool. The tool's name in the Steam client will be based on the currently checked out branch of Proton. You can override this name using the build_name variable.

See make help for other build targets and options.

Manual building

Configuring the build

mkdir ../build && cd ../build
../proton/configure.sh --enable-ccache --build-name=my_build

Running configure.sh will create a Makefile allowing you to build Proton. The scripts checks if containers are functional and prompt you if any host-side dependencies are missing. You should run the command from a directory created specifically for your build.

The configuration script tries to discover a working Docker or Podman setup to use, but you can force a compatible engine with --container-engine=<executable_name>.

You can enable ccache with --enable-cache flag. This will mount your $CCACHE_DIR or $HOME/.ccache inside the container.

--proton-sdk-image=registry.gitlab.steamos.cloud/proton/soldier/sdk:<version> can be used to build with a custom version of the Proton SDK images.

Check --help for other configuration options.

NOTE: If SELinux is in use, the Proton build container may fail to access your user's files. This is caused by SELinux's filesystem labels. You may pass the --relabel-volumes switch to configure to cause the container engine to relabel its bind-mounts and allow access to those files from within the container. This can be dangerous when used with system directories. Proceed with caution and refer your container engine's manual.

Building

make

Important make targets:

make install - install Proton into your user's Steam directory, see the install Proton locally section for details.

make redist - create a redistribute build (redist/) that can be copied to ~/.steam/root/compatibilitytools.d/.

make deploy - create a deployment build (deploy/). This is what we use to deploy Proton to Steam users via Steamworks.

make module=<module> module - build both 32- and 64-bit versions of the specified wine module. This allows rapid iteration on one module. This target is only useful after building Proton.

make dxvk / make vkd3d-proton - rebuild DXVK / vkd3d-proton.

Debug Builds

To prevent symbol stripping add UNSTRIPPED_BUILD=1 to the make invocation. This should be used only with a clean build directory.

E.g.:

mkdir ../debug-proton-build && cd ../debug-proton-build
../proton/configure.sh --enable-ccache --build-name=debug_build
make UNSTRIPPED_BUILD=1 install`

Install Proton locally

Steam ships with several versions of Proton, which games will use by default or that you can select in Steam Settings' Steam Play page. Steam also supports running games with local builds of Proton, which you can install on your machine.

To install a local build of Proton into Steam, make a new directory in ~/.steam/root/compatibilitytools.d/ with a tool name of your choosing and place the directory containing your redistributable build under that path.

The make install target will perform this task for you, installing the Proton build into the Steam folder for the current user. You will have to restart the Steam client for it to pick up on a new tool.

A correct local tool installation should look similar to this:

compatibilitytools.d/my_proton/
├── compatibilitytool.vdf
├── filelock.py
├── LICENSE
├── proton
├── proton_dist.tar
├── toolmanifest.vdf
├── user_settings.sample.py
└── version

To enable your local build in Steam, go to the Steam Play section of the Settings window. If the build was correctly installed, you should see "proton-localbuild" in the drop-down list of compatibility tools.

Each component of this software is used under the terms of their licenses. See the LICENSE files here, as well as the LICENSE, COPYING, etc files in each submodule and directory for details. If you distribute a built version of Proton to other users, you must adhere to the terms of these licenses.

Debugging

Proton builds have their symbols stripped by default. You can switch to "debug" beta branch in Steam (search for Proton in your library, Properties... -> BETAS -> select "debug") or build without stripping (see Debug Builds section).

The symbols are provided through the accompanying .debug files which may need to be explicitly loaded by the debugging tools. For GDB there's a helper script wine/tools/gdbinit.py (source it) that provides load-symbol-files (or lsf for short) command which loads the symbols for all the mapped files.

Runtime Config Options

Proton can be tuned at runtime to help certain games run. The Steam client sets some options for known games using the STEAM_COMPAT_CONFIG variable. You can override these options using the environment variables described below.

The best way to set these environment overrides for all games is by renaming user_settings.sample.py to user_settings.py and modifying it appropriately. This file is located in the Proton installation directory in your Steam library (often ~/.steam/steam/steamapps/common/Proton #.#).

If you want to change the runtime configuration for a specific game, you can use the Set Launch Options setting in the game's Properties dialog in the Steam client. Set the variable, followed by %command%. For example, input "PROTON_USE_WINED3D=1 %command%" to use the OpenGL-based wined3d renderer instead of the Vulkan-based DXVK renderer.

To enable an option, set the variable to a non-0 value. To disable an option, set the variable to 0. To use Steam's default configuration, do not specify the variable at all.

All of the below are runtime options. They do not effect permanent changes to the Wine prefix. Removing the option will revert to the previous behavior.

Compat config string	Environment Variable	Description
	PROTON_LOG	Convenience method for dumping a useful debug log to $PROTON_LOG_DIR/steam-$APPID.log. Set to 1 to enable default logging, or set to a string to be appended to the default WINEDEBUG channels.
	PROTON_LOG_DIR	Output log files into the directory specified. Defaults to your home directory.
	PROTON_DUMP_DEBUG_COMMANDS	When running a game, Proton will write some useful debug scripts for that game into $PROTON_DEBUG_DIR/proton_$USER/.
	PROTON_DEBUG_DIR	Root directory for the Proton debug scripts, /tmp by default.
	PROTON_WAIT_ATTACH	Wait for a debugger to attach to steam.exe before launching the game process. To attach to the game process at startup, debuggers should be set to follow child processes.
	PROTON_CRASH_REPORT_DIR	Write crash logs into this directory. Does not clean up old logs, so may eat all your disk space eventually.
wined3d	PROTON_USE_WINED3D	Use OpenGL-based wined3d instead of Vulkan-based DXVK for d3d11, d3d10, and d3d9.
nod3d11	PROTON_NO_D3D11	Disable d3d11.dll, for d3d11 games which can fall back to and run better with d3d9.
nod3d10	PROTON_NO_D3D10	Disable d3d10.dll and dxgi.dll, for d3d10 games which can fall back to and run better with d3d9.
noesync	PROTON_NO_ESYNC	Do not use eventfd-based in-process synchronization primitives.
nofsync	PROTON_NO_FSYNC	Do not use futex-based in-process synchronization primitives. (Automatically disabled on systems with no FUTEX_WAIT_MULTIPLE support.)
noxim	PROTON_NO_XIM	Enabled by default. Do not attempt to use XIM (X Input Methods) support. XIM support is known to cause crashes with libx11 older than version 1.7.
enablenvapi	PROTON_ENABLE_NVAPI	Enable NVIDIA's NVAPI GPU support library.
nativevulkanloader		Use the Vulkan loader shipped with the game instead of Proton's built-in Vulkan loader. This breaks VR support, but is required by a few games.
forcelgadd	PROTON_FORCE_LARGE_ADDRESS_AWARE	Force Wine to enable the LARGE_ADDRESS_AWARE flag for all executables. Enabled by default.
heapdelayfree	PROTON_HEAP_DELAY_FREE	Delay freeing some memory, to work around application use-after-free bugs.
gamedrive	PROTON_SET_GAME_DRIVE	Create an S: drive which points to the Steam Library which contains the game.
noforcelgadd		Disable forcelgadd. If both this and forcelgadd are set, enabled wins.
oldglstr	PROTON_OLD_GL_STRING	Set some driver overrides to limit the length of the GL extension string, for old games that crash on very long extension strings.
vkd3dfl12		Force the Direct3D 12 feature level to 12, regardless of driver support.
vkd3dbindlesstb		Put force_bindless_texel_buffer into VKD3D_CONFIG.
nomfdxgiman	WINE_DO_NOT_CREATE_DXGI_DEVICE_MANAGER	Enable hack to work around video issues in some games due to incomplete IMFDXGIDeviceManager support.
noopwr	WINE_DISABLE_VULKAN_OPWR	Enable hack to disable Vulkan other process window rendering which sometimes causes issues on Wayland due to blit being one frame behind.
hidenvgpu	PROTON_HIDE_NVIDIA_GPU	Force Nvidia GPUs to always be reported as AMD GPUs. Some games require this if they depend on Windows-only Nvidia driver functionality. See also DXVK's nvapiHack config, which only affects reporting from Direct3D.
	WINE_FULLSCREEN_INTEGER_SCALING	Enable integer scaling mode, to give sharp pixels when upscaling.
cmdlineappend:		Append the string after the colon as an argument to the game command. May be specified more than once. Escape commas and backslashes with a backslash.
nowritewatch	PROTON_NO_WRITE_WATCH	Disable support for memory write watches in ntdll. This is a very dangerous hack and should only be applied if you have verified that the game can operate without write watches. This improves performance for some very specific games (e.g. CoreRT-based games).
nosteamffmpeg	PROTON_NO_STEAM_FFMPEG	Ignore ffmpeg that ships with Steam. Some videos may not play.
seccomp	PROTON_USE_SECCOMP	Note: Obsoleted in Proton 5.13. In older versions, enable seccomp-bpf filter to emulate native syscalls, required for some DRM protections to work.
d9vk	PROTON_USE_D9VK	Note: Obsoleted in Proton 5.0. In older versions, use Vulkan-based DXVK instead of OpenGL-based wined3d for d3d9.