Beginner's configuration problem

[spolenak]

Hello,
on Openhab3 (Raspberry PI 3 b+) I have installed mosquitto as mqtt broker and mqtt communication works OK.
Because I also want to read temperature measurements from DS18B20 with onewire and some other measurements from AD converter ADS1015 with I2C I installed mqttany succesfuly but when I want to start it I get an error and I don't know how to solve it (probably I didn't do something correctly in config.yml):

openhabian@openhabian:/opt/mqttany/mqttany $ python3 mqttany.py
2022-03-08 11:28:38,396 [INFO ] [core ] MQTTany 0.14.3 starting
2022-03-08 11:28:38,602 [INFO ] [core.gpio ] Detected board: RASPBERRY_PI_3B_PLUS
2022-03-08 11:28:39,930 [INFO ] [core ] Module 'mqtt' started successfully
2022-03-08 11:28:39,946 [ERROR] [mqtt ] An exception occurred while running function 'start'
2022-03-08 11:28:39,967 [ERROR] [mqtt ]

Traceback (most recent call last):
File "/opt/mqttany/mqttany/modules/init.py", line 83, in call
retval = func(**kwargs)
File "/opt/mqttany/mqttany/modules/mqtt.py", line 184, in start
client.connect_async(
File "/home/openhabian/.local/lib/python3.9/site-packages/paho/mqtt/client.py", line 978, in connect_async
raise ValueError('Invalid host.')
ValueError: Invalid host.

Mqttany.service status seems ok:

openhabian@openhabian:/opt/mqttany/mqttany/config $ sudo systemctl status mqttany.service
[sudo] password for openhabian:
● mqttany.service - MQTTany service
Loaded: loaded (/etc/systemd/system/mqttany.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2022-03-08 11:16:14 CET; 32min ago
Main PID: 504 (python3)
Tasks: 3 (limit: 2178)
CPU: 11.049s
CGroup: /system.slice/mqttany.service
└─504 /usr/bin/python3 mqttany.py

Mar 08 11:16:14 openhabian systemd[1]: Started MQTTany service.

Could you, please, advise me how to proceed ? For your information, I didn't connect DS18B20 to Raspberry PI yet ...

Kind regards,

Peter

[CrazyIvan359]

The error is telling you where to look, seems something isn't right with the MQTT host you have in your settings. What have you put for the host?

There is no support for any of the ADS devices at this time. I have plans to add support at some point but have no time to work on that right now.

[spolenak]

MQTT configuration is:

host: 192.168.0.24 #mqtt broker ip
port: 1883
client id: 'mqttany'

Is this ok ?

[CrazyIvan359]

Try putting the host IP in quotes, YAML might be trying to read it as a number.