PopnPanel

Vector graphics Pop'n Music panel design and CAD files for DIY enthusiasts

Preview

Note Below are LOW QUALITY preview renders, please either take 300dpi renders from the 300dpi-renders folder or export your own from the svg.

Type A

Type B

Type K (KONAMI Official Controller)

Dimensions

Refer to dimensions.png or dimensions-overlay.png for buttons and spacing. It is common to all designs.

Build your own controller

If you wish to build an ASC, maybe you'll appreciate this

Appendix: Arcade accurate dimensions

Of course when building an ASC, the bounding box can be the size of your choice, but if you wanna go with the arcade size here is some additional information.

Type A

Type A control panel has no bounding box around the printed design.

Type B

SD cab type B has :

• two colored sides which are 25mm thick each
• a white center part which is 748mm thick
• a small 1mm gap between each side and the center part (to account for panel hinge mechanism)

Panel depth (from top view) :

• bottom margin is 35mm
• printed trapezoid acrylic panel height is 280mm
• top margin is 25mm

In conclusion :

• cabinet total width is 25+1+748+1+25 = 800mm (colored side + gap + center part + gap + colored side).
• panel total depth, from player to cab monitor is 35+280+25 = 340mm (top view: bottom margin + design + top margin).
• the front part of the panel has a fillet (edge is rounded). The fillet edge has a radius of about 30mm.

Donation

If this project helps you and you want to give back, you can help me with my future projects.

While not necessary, donations are much appreciated and will only go towards funding future github projects (arcade hardware ain't cheap :( ).

Of course you'll also receive my gratitude and I'll remember you if you post a feature request ;)