Mys Tic File Announce
Ver 2.0.0.0
- Black Panther(RCS)
- aka Dan Richter
- Sysop - Castle Rock BBS
- telnet://bbs.castlerockbbs.com
- http://www.castlerockbbs.com
- The sparrows are flying again...
This version has a major change! The name of the config file has changed to a more generic name. The reason for this, is the config file will be used for multiple programs in the near future. The only change that needs to take place at this time, is rename the mtafile.ini to rcs.ini. Simple enough, right? ;) Please take a look at the new rcs.ini file, as there have been many additions made to it. Not all of them are for MTAFile, but as this config file will be used by multiple programs, it's easier to have all of it in one file.
Please take a look at the new rcs.ini file, to make sure that you have all of the current information included. The file has been slightly re-arranged into sections. The general section includes basic information like BBS name, Sysop name. The MTAFile specific section includes the location of the .tic files. The other sections can be ignored until these programs are released. If you do run these programs, just update the rcs.ini file at that time.
Mys Tic File Announce is a very simple TIC file announcement generator. Other programs that create new file announcements require a lengthy config program which require all file echos and BBS file areas to be set up. This program will take all the information from the TIC files, and generate a report that can be posted in message bases.
While this program was written for use with Mystic BBS, running under DOS/Windows or Linux, it can be used with any BBS software. Again, there is no interaction between the BBS software and this program. It is completely independent of the BBS.
While every effort is made to make sure this program does what it is designed to, and not harm your computer, the only warranty you have, is this program will take up space on your hard drive. Other than that, I assume no reponsibility for what happens to your computer due to the use of this software.
If you do notice a bug in the program, or have a suggestion on how it could be improved, please feel free to let me know.
- mtafile.exe - The main program
- mtafile.txt - The file your reading right now :)
- mtafile.rpt - File created by the program in Mystic directory
- mtafile.log - File created by the program in logs directory
- rcs.ini - Configuration file read by the program
- mtafile.dat - File created by the program to hold overall stats
- final.txt - File created by the program in Mystic directory
MTAFile now has a config file which allows you, the Sysop, to define a few options, instead of including them on the command line. This file must exist for the program to run. A sample config file is included with this archive.
The format of the config will be very familiar to you. All lines that start with the ';', are considered comments and will be ignored. The remaining lines include:
TicPath=c:\path\to\incoming\tic\files\
BBS=Another Awesome BBS
Sysop=Exaulted Ruler
LogPath=c:\path\to\log\files\
Please note, the trailing slash/backslash is required in the paths. There will be better error checking for this in future versions.
The EXE file should be placed in your \mystic directory. It will create a log file that will be placed in the directory assigned in the config, called mtafile.log. This log contains, when the program was run, which files were announced, and from which file echo area. Right now, the log file does grow quickly, as there is still quite a bit of debugging information being included.
MTAFile creates a file in the \mystic directory called mtafile.rpt. This file can have a header and/or footer file attached to it, before being posted to the message echos. (Instructions will be shown below)
If the files 'header.txt' or 'footer.txt' are in the directory, MTAFile will combine them with the 'mtafile.rpt' to create the 'final.txt'.
This program can be run with two different setups. It can be called whenever new files are received, for those Sysops who post multiple new file announcements per day. Keep in mind, the mtafile.rpt is overwritten each time the program in run. The other way to set this up, is to copy the TIC files into an announcement sub-directory. Then, when the nightly maintenance is run, this program will process all of the TICs received, and generate one file announcement per day. I will give examples below of how I have this set up at Castle Rock BBS.
The following instructions show installation on a Windows system. I think it is safe to assume if you are running the Linux/Ubuntu version, you should be able to figure the commands out. :) If not, contact me, and I'll provide more information on the Linux installation.
Command line parameters:
-a - Announce mode
-r - Report mode
-h - Help screen
? - Help screen
mtafile.exe -a
or
./mtafile -a
This will process any .tic files that are located in the directory given in the config file. It will generate the mtafile.rpt file, and combine the header.txt and footer.txt files, if they exist, to create the final.txt.
mtafile.exe -r #
or
./mtafile -r #
This will generate a report using the information in the mtafile.dat file, for the last # number of runs. For example, if you run MTAFile once per day, as I think most of us do, and you run ./mtafile -r 7, the report generated will show the incoming file stats for the last 7 days. If you would like this to show only one day, just run ./mtafile -r 1, etc.
Here is a sample of my mailin.bat file that runs whenever incoming mail/files are received:
-=>snip<=-
c:
cd \bbs\mystic\
:start
if exist c:\bbs\mystic\echomail\in\*.tic goto file
goto in
:file
cd \bbs\mystic\echomail\in\
copy *.tic \bbs\mystic\echomail\in\announce\ /y
cd \bbs\mystic\
mutil fileimport
goto in
:in
cd \bbs\mystic\
mutil mailin.ini
goto end
:end
cd \bbs\mystic\-=>snip<=-
(In case your wondering, this is only a portion of the complete batch file used at Castle Rock BBS. The actual file is about five times as long, but this should give you the idea)
Then, in your nightly maintenance, you would include something like the following:
-=>snip<=-
c:
cd \bbs\mystic\
del mtafile.rpt
del final.txt
mtafile -a
cd \bbs\mystic\
mutil fileannounce.ini-=>snip<=-
The 'del mtafile.rpt' and 'del final.txt' lines will ensure that old postings
do not get posted again. These files will be generated on the 'mtafile' line
which follows. The program should now delete old copies of mtafile.rpt, but I
would still leave this in, just to be safe. :)
The program will take the output file of MTAFILE.RPT, and combine it with
HEADER.TXT and FOOTER.TXT files, if they exist. These files would need to be
located in the \mystic directory. The final output file name is FINAL.TXT.
The last line is telling MUTIL to post the text file to different message
areas on the BBS.
The FILEANNOUNCE.INI file that I am using looks like this:
-=>snip<=-
[General]
PostTextFiles = true
logfile=mutil.log
loglevel=3
; ==========================================================================
; ==========================================================================
; ==========================================================================
[PostTextFiles]
totalfiles = 8
file1_name = c:\mystic\final.txt
file1_baseidx = 2
file1_from = CRBBS File Bot
file1_to = All
file1_subj = New Files at Castle Rock BBS
file1_addr = 1:317/3
file1_delfile = false
-=>snip<=-
This .INI file is very well documented, so there shouldn't be any problems with figuring out how to set it up.
-=-= Credits =-=-
I would like to give sincere thanks to the following people
(in no particular order):
g00r00 - for making, and maintaning an awesome BBS package
Avon - for having an great network which provides great support
and for testing this program during pre-release
GaryCrunk - for answering some rookie pascal questions
Apam - for showing us all that BBS programming is still alive
fsxNet - for putting up with my stupid questions and test posts
Cmech - for making great looking programs look easy to do :)
Gryphon - for porting some awesome games into MPL which got me
interested in learning Pascal again
xqtr - for making some great MPLs - even if most of them won't work
on Windows :) (I ran Windows at the time)
fabian - for helping me figure out better functions to use
tiny - for giving me his string compare functions to use
I know I'm forgetting people here. It is not intentional. :)
-=-= Known bugs: =-=-
-
None at this time - If you find something, please let me know
-=-= ToDo List: =-=- -
Experiment with adding ANSI capability to output file
-
Would like to be able to add something to announce hatched files