Update library.properties #25
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Arduino Build | |
| on: | |
| push: | |
| branches: [main] | |
| jobs: | |
| # This is the name of the job - can be whatever. | |
| test-matrix: | |
| # Here we tell GitHub that the jobs must be determined | |
| # dynamically depending on a matrix configuration. | |
| strategy: | |
| matrix: | |
| # The matrix will produce one job for each configuration | |
| # parameter of type `arduino-platform`, in this case a | |
| # total of 2. | |
| arduino-platform: ["arduino:avr"] | |
| # This is usually optional but we need to statically define the | |
| # FQBN of the boards we want to test for each platform. In the | |
| # future the CLI might automatically detect and download the core | |
| # needed to compile against a certain FQBN, at that point the | |
| # following `include` section will be useless. | |
| include: | |
| # This works like this: when the platform is "arduino:samd", the | |
| # variable `fqbn` is set to "arduino:samd:nano_33_iot". | |
| - arduino-platform: "arduino:avr" | |
| fqbn: "arduino:avr:nano" | |
| - arduino-platform: "arduino:avr" | |
| fqbn: "arduino:avr:unowifi" | |
| runs-on: ubuntu-latest | |
| steps: | |
| # First of all, we clone the repo using the `checkout` action. | |
| - name: Checkout | |
| uses: actions/checkout@v4 | |
| # We use the `arduino/setup-arduino-cli` action to install and | |
| # configure the Arduino CLI on the system. | |
| - name: Setup Arduino CLI | |
| uses: arduino/setup-arduino-cli@v1 | |
| # We then install the platform, which one will be determined | |
| # dynamically by the build matrix. | |
| - name: Install platform | |
| run: | | |
| arduino-cli core update-index | |
| arduino-cli core install ${{ matrix.arduino-platform }} | |
| - name: Run PWD | |
| run: pwd | |
| - name: mkdir /home/runner/work/AD7747/AD7747/test | |
| run: mkdir /home/runner/work/AD7747/AD7747/test | |
| - name: cp .ino to home | |
| run: cp /home/runner/work/AD7747/AD7747/examples/AD7774-serial/AD7774-serial.ino /home/runner/work/AD7747/AD7747/test/test.ino | |
| - name: cp lib to /home | |
| run: cp /home/runner/work/AD7747/AD7747/src/* /home/runner/work/AD7747/AD7747/test | |
| - name: ls files to /home/test | |
| run: ls /home/runner/work/AD7747/AD7747/test | |
| # Finally, we compile the sketch, using the FQBN that was set | |
| # in the build matrix. | |
| - name: Compile Sketch | |
| run: arduino-cli compile --fqbn ${{ matrix.fqbn }} /home/runner/work/AD7747/AD7747/test |