Major Release v1.0
-----Changes in FrontEnd PCB-----
- Added Button Cap in 3D CAD.
- Rotated the RJ45 Connector.
- Shifted the Micro-controller to provide easier access to usb port.
- Added extra hole to hold cables.
- Board cut-out under Wi-Fi Antenna.
-----Changes in BackEnd PCB-----
- Moved the RJ45 Connector towards the bottom of the board.
- Moved the Micro-controller towards the bottom of the board.
- Moved the OLED display slightly upward.
- Added extra hole to hold cables.
- OLED Display is now slodered via its ribbon connecter rather than a through-hole header.
-----Changes in PowerDistribution PCB-----
- Terminal Block shifted slightly inwards.
- Added extra board support for M3 screws to fit-in.
- Change the distance between the front two mounting hole to 84mm.
-----Changes in PowerMotor PCB-----
- It now consist of two PCBs which work together as a daughter board and a main board.
- The daughter board is a DC/DC Buck Boost Converter having header pins with plugs into the main board.
- The main board consists of a motor driver and molex connector to connect to the BackEnd PCB.