Modify rpsmg_sdb driver #1

mcarlin-ds · 2021-05-19T21:44:53Z

Add ioctl for reading physical address of sdb buffer for transfer to CM4. Allows CM4 to read from DDR3 shared buffer at the actual hardware address.

…sdb buffer for transfer to CM4

…ction commit ddc204b upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf4ff7 upstream. xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac08 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ torvalds#226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at QubesOS/qubes-issues#7257 Fixes: d7dac08 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d327a7 upstream. My latest patch, attempting to fix the refcount leak in a minimal way turned out to add a new bug. Whenever the bind operation fails before we attempt to grab a reference count on a device, we might release the device refcount of a prior successful bind() operation. syzbot was not happy about this [1]. Note to stable teams: Make sure commit b37a466 ("netdevice: add the case if dev is NULL") is already present in your trees. [1] general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G W 5.17.0-syzkaller-04796-g169e77764adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48 RSP: 0018:ffffc900038cfcc0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880756eb600 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffc900038cfe3e RDI: 0000000000000380 RBP: ffff888015ee5000 R08: 0000000000000001 R09: ffff888015ee5535 R10: ffffed1002bdcaa6 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900038cfe37 R14: ffffc900038cfe38 R15: ffff888015ee5012 FS: 0000555555acd300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000280 CR3: 0000000077db6000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sys_connect_file+0x155/0x1a0 net/socket.c:1900 __sys_connect+0x161/0x190 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f016acb90b9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd417947f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f016acb90b9 RDX: 0000000000000010 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00007f016ac7d0a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f016ac7d130 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Fixes: 764f4eb ("llc: fix netdevice reference leaks in llc_ui_bind()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: 赵子轩 <beraphin@gmail.com> Cc: Stoyan Manolov <smanolov@suse.de> Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 680af5b upstream. cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ed ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddbc84f upstream. ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node. Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node. calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes. Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[]. However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty. As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 torvalds#461 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:pagetypeinfo_show+0x163/0x460 Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82 RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003 RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00 R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000 FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0 Call Trace: seq_read_iter+0x128/0x460 proc_reg_read_iter+0x51/0x80 new_sync_read+0x113/0x1a0 vfs_read+0x136/0x1d0 ksys_read+0x70/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node. Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: 2a1e274 ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bfc8089 upstream. When we use HW-tag based kasan and enable vmalloc support, we hit the following bug. It is due to comparison between tagged object and non-tagged pointer. We need to reset the kasan tag when we need to compare tagged object and non-tagged pointer. kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440 CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1 Hardware name: MT6983(ENG) (DT) Call trace: add_scan_area+0xc4/0x244 kmemleak_scan_area+0x40/0x9c layout_and_allocate+0x1e8/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768): kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197 kmemleak: [name:kmemleak&] min_count = 0 kmemleak: [name:kmemleak&] count = 0 kmemleak: [name:kmemleak&] flags = 0x1 kmemleak: [name:kmemleak&] checksum = 0 kmemleak: [name:kmemleak&] backtrace: module_alloc+0x9c/0x120 move_module+0x34/0x19c layout_and_allocate+0x1c4/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Yee Lee <yee.lee@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2fef99b ] This patch fixes xfstests/generic/475 failure. [ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix. [ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691764] sh (7615): drop_caches: 3 [ 293.691819] sh (7616): drop_caches: 3 [ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read [ 293.695659] sh (7618): drop_caches: 3 [ 293.696979] sh (7617): drop_caches: 3 [ 293.700290] sh (7623): drop_caches: 3 [ 293.708621] sh (7626): drop_caches: 3 [ 293.711386] sh (7628): drop_caches: 3 [ 293.711825] sh (7627): drop_caches: 3 [ 293.716738] sh (7630): drop_caches: 3 [ 293.719613] sh (7632): drop_caches: 3 [ 293.720971] sh (7633): drop_caches: 3 [ 293.727741] sh (7634): drop_caches: 3 [ 293.730783] sh (7636): drop_caches: 3 [ 293.732681] sh (7635): drop_caches: 3 [ 293.732988] sh (7637): drop_caches: 3 [ 293.738836] sh (7639): drop_caches: 3 [ 293.740568] sh (7641): drop_caches: 3 [ 293.743053] sh (7640): drop_caches: 3 [ 293.821889] ------------[ cut here ]------------ [ 293.824654] kernel BUG at fs/f2fs/node.c:3334! [ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1 [ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs] [ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b [ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202 [ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072 [ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21 [ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072 [ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00 [ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8 [ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000 [ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0 [ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 293.858380] Call Trace: [ 293.859302] <TASK> [ 293.860311] ? ttwu_do_wakeup+0x1c/0x170 [ 293.861800] ? ttwu_do_activate+0x6d/0xb0 [ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 293.864411] ? try_to_wake_up+0x9d/0x5e0 [ 293.865618] ? debug_smp_processor_id+0x17/0x20 [ 293.866934] ? debug_smp_processor_id+0x17/0x20 [ 293.868223] ? free_unref_page+0xbf/0x120 [ 293.869470] ? __free_slab+0xcb/0x1c0 [ 293.870614] ? preempt_count_add+0x7a/0xc0 [ 293.871811] ? __slab_free+0xa0/0x2d0 [ 293.872918] ? __wake_up_common_lock+0x8a/0xc0 [ 293.874186] ? __slab_free+0xa0/0x2d0 [ 293.875305] ? free_inode_nonrcu+0x20/0x20 [ 293.876466] ? free_inode_nonrcu+0x20/0x20 [ 293.877650] ? debug_smp_processor_id+0x17/0x20 [ 293.878949] ? call_rcu+0x11a/0x240 [ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs] [ 293.881437] ? kfree+0x1fe/0x230 [ 293.882674] f2fs_put_super+0x160/0x390 [f2fs] [ 293.883978] generic_shutdown_super+0x7a/0x120 [ 293.885274] kill_block_super+0x27/0x50 [ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs] [ 293.887806] deactivate_locked_super+0x35/0xa0 [ 293.889271] deactivate_super+0x40/0x50 [ 293.890513] cleanup_mnt+0x139/0x190 [ 293.891689] __cleanup_mnt+0x12/0x20 [ 293.892850] task_work_run+0x64/0xa0 [ 293.894035] exit_to_user_mode_prepare+0x1b7/0x1c0 [ 293.895409] syscall_exit_to_user_mode+0x27/0x50 [ 293.896872] do_syscall_64+0x48/0xc0 [ 293.898090] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 293.899517] RIP: 0033:0x7f5a975cd25b Fixes: 7735730 ("f2fs: fix to propagate error from __get_meta_page()") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit de2ae40 ] is_xen_pmu() is taking the cpu number as parameter, but it is not using it. Instead it just tests whether the Xen PMU initialization on the current cpu did succeed. As this test is done by checking a percpu pointer, preemption needs to be disabled in order to avoid switching the cpu while doing the test. While resuming from suspend() this seems not to be the case: [ 88.082751] ACPI: PM: Low-level resume complete [ 88.087933] ACPI: EC: EC started [ 88.091464] ACPI: PM: Restoring platform NVS memory [ 88.097166] xen_acpi_processor: Uploading Xen processor PM info [ 88.103850] Enabling non-boot CPUs ... [ 88.108128] installing Xen timer for CPU 1 [ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138 [ 88.122256] caller is is_xen_pmu+0x12/0x30 [ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1 [ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022 [ 88.145930] Call Trace: [ 88.148757] <TASK> [ 88.151193] dump_stack_lvl+0x48/0x5e [ 88.155381] check_preemption_disabled+0xde/0xe0 [ 88.160641] is_xen_pmu+0x12/0x30 [ 88.164441] xen_smp_intr_init_pv+0x75/0x100 Fix that by replacing is_xen_pmu() by a simple boolean variable which reflects the Xen PMU initialization state on cpu 0. Modify xen_pmu_init() to return early in case it is being called for a cpu other than cpu 0 and the boolean variable not being set. Fixes: bf6dfb1 ("xen/PMU: PMU emulation code") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 37a1a2e ] Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer. Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5c6f402 ] Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a60447e upstream. [ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b7fb0ae upstream. Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns -ENOMEM because it leads to a NULL pointer dereference bug. The dmesg says: [ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12 [ T1387] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ T1387] #PF: supervisor read access in kernel mode [ T1387] #PF: error_code(0x0000) - not-present page [ T1387] PGD 0 P4D 0 [ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W 5.17.0-rc4-superb-owl-00055-g80d47f5de5e3 [ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021 [ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80 [ T1387] Code: [... snip ...] [ T1387] RSP: 0000:ffffc90002b87770 EFLAGS: 00010246 [ T1387] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ T1387] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888101db30d0 [ T1387] RBP: 00000000fffffff4 R08: 0000000000000000 R09: 0000000000000000 [ T1387] R10: 0000000000000000 R11: ffffc90002b874d0 R12: 0000000000000001 [ T1387] R13: 0000000000058000 R14: ffff888105260c68 R15: ffff888105260828 [ T1387] FS: 00007f42e2ffd640(0000) GS:ffff888466b80000(0000) knlGS:0000000000000000 [ T1387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ T1387] CR2: 0000000000000000 CR3: 000000014acf0003 CR4: 0000000000770ee0 [ T1387] PKRU: 55555554 [ T1387] Call Trace: [ T1387] <TASK> [ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common 146addf995b9279ae7f509621078cccbe4f875e1] [... snip ...] [ T1387] </TASK> Cc: Daniel Baluta <daniel.baluta@nxp.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Keyon Jie <yang.jie@linux.intel.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Rander Wang <rander.wang@intel.com> Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: sound-open-firmware@alsa-project.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v5.2+ Fixes: d16046f ("ASoC: SOF: Intel: Add Intel specific HDA firmware loader") Link: https://lore.kernel.org/lkml/20220224145124.15985-1-ammarfaizi2@gnuweeb.org/ # v1 Link: https://lore.kernel.org/lkml/20220224180850.34592-1-ammarfaizi2@gnuweeb.org/ # v2 Link: https://lore.kernel.org/lkml/20220224182818.40301-1-ammarfaizi2@gnuweeb.org/ # v3 Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Link: https://lore.kernel.org/r/20220224185836.44907-1-ammarfaizi2@gnuweeb.org Signed-off-by: Mark Brown <broonie@kernel.org> [ammarfaizi2: Backport to Linux 5.4 LTS] Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e3c658 upstream. If there is already an entry present that is of order >= XA_CHUNK_SHIFT when we call xas_create_range(), xas_create_range() will misinterpret that entry as a node and dereference xa_node->parent, generally leading to a crash that looks something like this: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0 RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline] RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725 It's deterministically reproducable once you know what the problem is, but producing it in a live kernel requires khugepaged to hit a race. While the problem has been present since xas_create_range() was introduced, I'm not aware of a way to hit it before the page cache was converted to use multi-index entries. Fixes: 6b24ca4 ("mm: Use multi-index entries in the page cache") Reported-by: syzbot+0d2b0bf32ca5cfd09f2e@syzkaller.appspotmail.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dd75080 upstream. The shadow's page table is not updated when PTE_RPN_SHIFT is 24 and PAGE_SHIFT is 12. It not only causes false positives but also false negative as shown the following text. Fix it by bringing the logic of kasan_early_shadow_page_entry here. 1. False Positive: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50 Write of size 16 at addr f57f3be0 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1 Call Trace: [c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable) [c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300 [c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200 [c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0 [c80d1cc0] [c03018a4] memset+0x34/0x90 [c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50 [c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570 [c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0 [c80d1db0] [c2036580] init_sd+0xc4/0x1d0 [c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c [c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384 [c80d1ef0] [c0004b14] kernel_init+0x24/0x170 [c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64 Memory state around the buggy address: f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== 2. False Negative (with KASAN tests): ================================================================== Before fix: ok 45 - kmalloc_double_kzfree # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039 KASAN failure expected in "((volatile char *)area)[3100]", but none occurred not ok 46 - vmalloc_oob not ok 1 - kasan ================================================================== After fix: ok 1 - kasan Fixes: cbd1899 ("powerpc/mm: Fix an Oops in kasan_mmu_init()") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com [chleroy: Backport for 5.4] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 564d4ec ] The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 447c799 ] Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks. [ +0.000003] WARNING: possible recursive locking detected [ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted [ +0.000004] -------------------------------------------- [ +0.000002] python/4822 is trying to acquire lock: [ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000203] but task is already holding lock: [ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000017] other info that might help us debug this: [ +0.000002] Possible unsafe locking scenario: [ +0.000003] CPU0 [ +0.000002] ---- [ +0.000002] lock(reservation_ww_class_mutex); [ +0.000004] lock(reservation_ww_class_mutex); [ +0.000003] *** DEADLOCK *** [ +0.000002] May be due to missing lock nesting notation [ +0.000003] 7 locks held by python/4822: [ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at: kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu] [ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu] [ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu] [ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at: drm_dev_enter+0x5/0xa0 [drm] [ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3}, at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu] [ +0.000195] stack backtrace: [ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030 [ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018 [ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX: 00007fbff90a7317 [ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI: 0000000000000004 [ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09: 00007fbcc402d880 [ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12: 00000000c0184b18 [ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15: 00007fbcc402d820 Cc: Christian König <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Will reports that with CONFIG_EXPERT=y and CONFIG_HARDEN_BRANCH_PREDICTOR=n, the kernel dereferences a NULL pointer during boot: [ 2.384444] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2.384461] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 2.384472] pc : cpu_hyp_reinit+0x114/0x30c [ 2.384476] lr : cpu_hyp_reinit+0x80/0x30c [ 2.384529] Call trace: [ 2.384533] cpu_hyp_reinit+0x114/0x30c [ 2.384537] _kvm_arch_hardware_enable+0x30/0x54 [ 2.384541] flush_smp_call_function_queue+0xe4/0x154 [ 2.384544] generic_smp_call_function_single_interrupt+0x10/0x18 [ 2.384549] ipi_handler+0x170/0x2b0 [ 2.384555] handle_percpu_devid_fasteoi_ipi+0x120/0x1cc [ 2.384560] __handle_domain_irq+0x9c/0xf4 [ 2.384563] gic_handle_irq+0x6c/0xe4 [ 2.384566] el1_irq+0xf0/0x1c0 [ 2.384570] arch_cpu_idle+0x28/0x44 [ 2.384574] do_idle+0x100/0x2a8 [ 2.384577] cpu_startup_entry+0x20/0x24 [ 2.384581] secondary_start_kernel+0x1b0/0x1cc [ 2.384589] Code: b9469d08 7100011f 540003ad 52800208 (f9400108) [ 2.384600] ---[ end trace 266d08dbf96ff143 ]--- [ 2.385171] Kernel panic - not syncing: Fatal exception in interrupt In this configuration arm64_get_bp_hardening_data() returns NULL. Add a check in kvm_get_hyp_vector(). Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-arm-kernel/20220408120041.GB27685@willie-the-truck/ Fixes: 26129ea ("KVM: arm64: Add templates for BHB mitigation sequences") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6bf92d7 ] FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000 [ 523.462313] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0 [ 523.462315] Call Trace: [ 523.462316] <TASK> [ 523.462320] fib_table_delete+0x1a9/0x310 [ 523.462323] inet_rtm_delroute+0x93/0x110 [ 523.462325] rtnetlink_rcv_msg+0x133/0x370 [ 523.462327] ? _copy_to_iter+0xb5/0x6f0 [ 523.462330] ? rtnl_calcit.isra.0+0x110/0x110 [ 523.462331] netlink_rcv_skb+0x50/0xf0 [ 523.462334] netlink_unicast+0x211/0x330 [ 523.462336] netlink_sendmsg+0x23f/0x480 [ 523.462338] sock_sendmsg+0x5e/0x60 [ 523.462340] ____sys_sendmsg+0x22c/0x270 [ 523.462341] ? import_iovec+0x17/0x20 [ 523.462343] ? sendmsg_copy_msghdr+0x59/0x90 [ 523.462344] ? __mod_lruvec_page_state+0x85/0x110 [ 523.462348] ___sys_sendmsg+0x81/0xc0 [ 523.462350] ? netlink_seq_start+0x70/0x70 [ 523.462352] ? __dentry_kill+0x13a/0x180 [ 523.462354] ? __fput+0xff/0x250 [ 523.462356] __sys_sendmsg+0x49/0x80 [ 523.462358] do_syscall_64+0x3b/0x90 [ 523.462361] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 523.462364] RIP: 0033:0x7f24552aa337 [ 523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337 [ 523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003 [ 523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001 [ 523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040 [ 523.462373] </TASK> [ 523.462374] ---[ end trace ba537bc16f6bf4ed ]--- [2] FRRouting/frr#6412 Fixes: 4c7e808 ("ipv4: Plumb support for nexthop object in a fib_info") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7aa8104 upstream. the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c4 ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: openwrt/openwrt#9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23c2d49 upstream. The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 torvalds#33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83a1cde upstream. With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC. Fixes: bae1058 ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c80a29f ] Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838 ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <vinschen@redhat.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit c186f08 upstream. We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ================================================================== BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline] BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline] BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331 CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:83 [inline] dump_stack+0x144/0x187 lib/dump_stack.c:124 print_address_description+0x7d/0x630 mm/kasan/report.c:387 __kasan_report+0x132/0x190 mm/kasan/report.c:547 kasan_report+0x47/0x60 mm/kasan/report.c:564 ext4_search_dir fs/ext4/namei.c:1394 [inline] search_dirblock fs/ext4/namei.c:1199 [inline] __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 ext4_lookup_entry fs/ext4/namei.c:1622 [inline] ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690 __lookup_hash+0xc5/0x190 fs/namei.c:1451 do_rmdir+0x19e/0x310 fs/namei.c:3760 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x445e59 Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054 RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002 R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000 R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3 flags: 0x200000000000000() raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== ext4_search_dir: ... de = (struct ext4_dir_entry_2 *)search_buf; dlimit = search_buf + buf_size; while ((char *) de < dlimit) { ... if ((char *) de + de->name_len <= dlimit && ext4_match(dir, fname, de)) { ... } ... de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize); if (de_len <= 0) return -1; offset += de_len; de = (struct ext4_dir_entry_2 *) ((char *) de + de_len); } Assume: de=0xffff8881317c2fff dlimit=0x0xffff8881317c3000 If read 'de->name_len' which address is 0xffff8881317c3005, obviously is out of range, then will trigger use-after-free. To solve this issue, 'dlimit' must reserve 8 bytes, as we will read 'de->name_len' to judge if '(char *) de + de->name_len' out of range. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220324064816.1209985-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… abort commit 23e3d7f upstream. we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty torvalds#150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e09, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e09("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… lwt hook [ Upstream commit b02d196 ] xmit_check_hhlen() observes the dst for getting the device hard header length to make sure a modified packet can fit. When a helper which changes the dst - such as bpf_skb_set_tunnel_key() - is called as part of the xmit program the accessed dst is no longer valid. This leads to the following splat: BUG: kernel NULL pointer dereference, address: 00000000000000de #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ torvalds#103 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:bpf_xmit+0xfb/0x17f Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000 FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0 Call Trace: <TASK> lwtunnel_xmit.cold+0x71/0xc8 ip_finish_output2+0x279/0x520 ? __ip_finish_output.part.0+0x21/0x130 Fix by fetching the device hard header length before running the BPF code. Fixes: 3a0af8f ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af68656 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…to avoid GPF [ Upstream commit 1a726cb ] The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: a1d8843 ("VMCI: Fix two UVA mapping bugs") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f46fab0 ] Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 011a871 ] When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty torvalds#68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 691b048 ] - When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd37922 ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9eed321 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix USB IRQ handler initialization. Setting always-on on boost regulator generates a fault. Unable to handle kernel NULL pointer dereference at virtual address 0000004c pgd = 54d71286 [0000004c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 72 Comm: irq/70-pmic_irq Not tainted 5.15.67ppav4.0 torvalds#188 Hardware name: STM32 (Device Tree Support) PC is at blocking_notifier_call_chain+0x4/0x90 LR is at regulator_notifier_call_chain+0xc/0x14 ... (blocking_notifier_call_chain) from [<c062b368>] (regulator_notifier_call_chain+0xc/0x14) (regulator_notifier_call_chain) from [<c0644a9c>] (stpmic1_boost_irq_handler+0x4c/0x84) (stpmic1_boost_irq_handler) from [<c017fbc0>] (handle_nested_irq+0xc8/0x12c) (handle_nested_irq) from [<c07160b0>] (regmap_irq_thread+0x46c/0x6d4) (regmap_irq_thread) from [<c017c2dc>] (irq_thread_fn+0x1c/0x7c) (irq_thread_fn) from [<c017c0bc>] (irq_thread+0x150/0x224) (irq_thread) from [<c0147874>] (kthread+0x14c/0x164) (kthread) from [<c0100130>] (ret_from_fork+0x14/0x24) Signed-off-by: Pascal Paillet <p.paillet@st.com> Change-Id: I23d72d24d2de029c516f4568dc518917cb2b95ca Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/312297 Reviewed-by: Patrick DELAUNAY <patrick.delaunay@foss.st.com> ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com> ACI: CIBUILD <MDG-smet-aci-builds@list.st.com> Domain-Review: Patrick DELAUNAY <patrick.delaunay@foss.st.com>

[ Upstream commit 4428399 ] The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420) Fixes: 30e2ae9 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-2-c542692c6a2f@ideasonboard.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 265f3ed ] All callers of work_on_cpu() share the same lock class key for all the functions queued. As a result the workqueue related locking scenario for a function A may be spuriously accounted as an inversion against the locking scenario of function B such as in the following model: long A(void *arg) { mutex_lock(&mutex); mutex_unlock(&mutex); } long B(void *arg) { } void launchA(void) { work_on_cpu(0, A, NULL); } void launchB(void) { mutex_lock(&mutex); work_on_cpu(1, B, NULL); mutex_unlock(&mutex); } launchA and launchB running concurrently have no chance to deadlock. However the above can be reported by lockdep as a possible locking inversion because the works containing A() and B() are treated as belonging to the same locking class. The following shows an existing example of such a spurious lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted ------------------------------------------------------ kworker/0:1/9 is trying to acquire lock: ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0 but task is already holding lock: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __flush_work+0x83/0x4e0 work_on_cpu+0x97/0xc0 rcu_nocb_cpu_offload+0x62/0xb0 rcu_nocb_toggle+0xd0/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}: __mutex_lock+0x81/0xc80 rcu_nocb_cpu_deoffload+0x38/0xb0 rcu_nocb_toggle+0x144/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 percpu_down_write+0x31/0x200 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&wfc.work)); lock(rcu_state.barrier_mutex); lock((work_completion)(&wfc.work)); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by kworker/0:1/9: #0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500 #1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 stack backtrace: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: events work_for_cpu_fn Call Trace: rcu-torture: rcu_torture_read_exit: Start of episode <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x132/0x150 __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 ? _cpu_down+0x57/0x2b0 percpu_down_write+0x31/0x200 ? _cpu_down+0x57/0x2b0 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 ? __pfx_worker_thread+0x10/0x10 kthread+0xe6/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK Fix this with providing one lock class key per work_on_cpu() caller. Reported-and-tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 170c75d ] As talked about in commit d66d24a ("ath10k: Keep track of which interrupts fired, don't poll them"), if we access the copy engine register at a bad time then ath10k can go boom. However, it's not necessarily easy to know when it's safe to access them. The ChromeOS test labs saw a crash that looked like this at shutdown/reboot time (on a chromeos-5.15 kernel, but likely the problem could also reproduce upstream): Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP ... CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51 Hardware name: Google Kingoftown (DT) ... pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc] lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc] ... Call trace: ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...] ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...] ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...] ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...] ath10k_core_stop+0x13c/0x1ec [ath10k_core ...] ath10k_halt+0x398/0x5b0 [ath10k_core ...] ath10k_stop+0xfc/0x1a8 [ath10k_core ...] drv_stop+0x148/0x6b4 [mac80211 ...] ieee80211_stop_device+0x70/0x80 [mac80211 ...] ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...] ieee80211_stop+0x144/0x1a0 [mac80211 ...] __dev_close_many+0x1e8/0x2c0 dev_close_many+0x198/0x33c dev_close+0x140/0x210 cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...] ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...] ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...] ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...] ath10k_core_unregister+0x80/0xb0 [ath10k_core ...] ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...] ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...] platform_shutdown+0x7c/0xa0 device_shutdown+0x3e0/0x58c kernel_restart_prepare+0x68/0xa0 kernel_restart+0x28/0x7c Though there's no known way to reproduce the problem, it makes sense that it would be the same issue where we're trying to access copy engine registers when it's not allowed. Let's fix this by changing how we "disable" the interrupts. Instead of tweaking the copy engine registers we'll just use disable_irq() and enable_irq(). Then we'll configure the interrupts once at power up time. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1 Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 624820f ] fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 Signed-off-by: youwan Wang <wangyouwan@126.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5104fdf ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic torvalds#46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <qu.huang@linux.dev> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 87c3a58 ] Except on x86, preempt_count is always accessed with READ_ONCE(). Repeated invocations in macros like irq_count() produce repeated loads. These redundant instructions appear in various fast paths. In the one shown below, for example, irq_count() is evaluated during kernel entry if !tick_nohz_full_cpu(smp_processor_id()). 0001ed0a <irq_enter_rcu>: 1ed0a: 4e56 0000 linkw %fp,#0 1ed0e: 200f movel %sp,%d0 1ed10: 0280 ffff e000 andil #-8192,%d0 1ed16: 2040 moveal %d0,%a0 1ed18: 2028 0008 movel %a0@(8),%d0 1ed1c: 0680 0001 0000 addil #65536,%d0 1ed22: 2140 0008 movel %d0,%a0@(8) 1ed26: 082a 0001 000f btst #1,%a2@(15) 1ed2c: 670c beqs 1ed3a <irq_enter_rcu+0x30> 1ed2e: 2028 0008 movel %a0@(8),%d0 1ed32: 2028 0008 movel %a0@(8),%d0 1ed36: 2028 0008 movel %a0@(8),%d0 1ed3a: 4e5e unlk %fp 1ed3c: 4e75 rts This patch doesn't prevent the pointless btst and beqs instructions above, but it does eliminate 2 of the 3 pointless move instructions here and elsewhere. On x86, preempt_count is per-cpu data and the problem does not arise presumably because the compiler is free to optimize more effectively. This patch was tested on m68k and x86. I was expecting no changes to object code for x86 and mostly that's what I saw. However, there were a few places where code generation was perturbed for some reason. The performance issue addressed here is minor on uniprocessor m68k. I got a 0.01% improvement from this patch for a simple "find /sys -false" benchmark. For architectures and workloads susceptible to cache line bounce the improvement is expected to be larger. The only SMP architecture I have is x86, and as x86 unaffected I have not done any further measurements. Fixes: 1511583 ("preempt: Cleanup the macro maze a bit") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 18f0394 ] Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff84d4a65e>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff84d4a65e>] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560 [<ffffffff855ce503>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff855ce503>] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff855b9ce4>] dst_output include/net/dst.h:444 [inline] [<ffffffff855b9ce4>] NF_HOOK include/linux/netfilter.h:309 [inline] [<ffffffff855b9ce4>] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352 [<ffffffff8597984e>] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250 [<ffffffff8594623e>] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653 [<ffffffff858f5142>] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783 [<ffffffff858ea411>] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] [<ffffffff858ea411>] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212 [<ffffffff858f02f9>] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764 [<ffffffff8589f060>] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] [<ffffffff8589f060>] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170 [<ffffffff85941567>] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73 [<ffffffff859408b2>] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839 [<ffffffff85910b5e>] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029 [<ffffffff8544d559>] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849 [<ffffffff84c6c4d2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84c6c4d2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84c6c4d2>] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504 [<ffffffff84c6ca91>] ___sys_sendmsg net/socket.c:2558 [inline] [<ffffffff84c6ca91>] __sys_sendmsg+0x271/0x360 net/socket.c:2587 [<ffffffff84c6cbff>] __do_sys_sendmsg net/socket.c:2596 [inline] [<ffffffff84c6cbff>] __se_sys_sendmsg net/socket.c:2594 [inline] [<ffffffff84c6cbff>] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594 [<ffffffff85b32553>] do_syscall_x64 arch/x86/entry/common.c:51 [inline] [<ffffffff85b32553>] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84 [<ffffffff85c00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3cffa2d ] Commit 9eed321 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec2 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254d ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 95ff036 ] The kernel build robot reported a UAF error while running xfs/433 (edited somewhat for brevity): BUG: KASAN: use-after-free in xfs_attr3_node_inactive (fs/xfs/xfs_attr_inactive.c:214) xfs Read of size 4 at addr ffff88820ac2bd44 by task kworker/0:2/139 CPU: 0 PID: 139 Comm: kworker/0:2 Tainted: G S 5.19.0-rc2-00004-g7cf2b0f9611b #1 Hardware name: Hewlett-Packard p6-1451cx/2ADA, BIOS 8.15 02/05/2013 Workqueue: xfs-inodegc/sdb4 xfs_inodegc_worker [xfs] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) print_address_description+0x1f/0x200 print_report.cold (mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) xfs_attr3_node_inactive (fs/xfs/xfs_attr_inactive.c:214) xfs xfs_attr3_root_inactive (fs/xfs/xfs_attr_inactive.c:296) xfs xfs_attr_inactive (fs/xfs/xfs_attr_inactive.c:371) xfs xfs_inactive (fs/xfs/xfs_inode.c:1781) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1837 fs/xfs/xfs_icache.c:1860) xfs process_one_work worker_thread kthread ret_from_fork </TASK> Allocated by task 139: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc (mm/slab.h:750 mm/slub.c:3214 mm/slub.c:3222 mm/slub.c:3229 mm/slub.c:3239) _xfs_buf_alloc (include/linux/instrumented.h:86 include/linux/atomic/atomic-instrumented.h:41 fs/xfs/xfs_buf.c:232) xfs xfs_buf_get_map (fs/xfs/xfs_buf.c:660) xfs xfs_buf_read_map (fs/xfs/xfs_buf.c:777) xfs xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:289) xfs xfs_da_read_buf (fs/xfs/libxfs/xfs_da_btree.c:2652) xfs xfs_da3_node_read (fs/xfs/libxfs/xfs_da_btree.c:392) xfs xfs_attr3_root_inactive (fs/xfs/xfs_attr_inactive.c:272) xfs xfs_attr_inactive (fs/xfs/xfs_attr_inactive.c:371) xfs xfs_inactive (fs/xfs/xfs_inode.c:1781) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1837 fs/xfs/xfs_icache.c:1860) xfs process_one_work worker_thread kthread ret_from_fork Freed by task 139: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) __kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328 mm/kasan/common.c:374) kmem_cache_free (mm/slub.c:1753 mm/slub.c:3507 mm/slub.c:3524) xfs_buf_rele (fs/xfs/xfs_buf.c:1040) xfs xfs_attr3_node_inactive (fs/xfs/xfs_attr_inactive.c:210) xfs xfs_attr3_root_inactive (fs/xfs/xfs_attr_inactive.c:296) xfs xfs_attr_inactive (fs/xfs/xfs_attr_inactive.c:371) xfs xfs_inactive (fs/xfs/xfs_inode.c:1781) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1837 fs/xfs/xfs_icache.c:1860) xfs process_one_work worker_thread kthread ret_from_fork I reproduced this for my own satisfaction, and got the same report, along with an extra morsel: The buggy address belongs to the object at ffff88802103a800 which belongs to the cache xfs_buf of size 432 The buggy address is located 396 bytes inside of 432-byte region [ffff88802103a800, ffff88802103a9b0) I tracked this code down to: error = xfs_trans_get_buf(*trans, mp->m_ddev_targp, child_blkno, XFS_FSB_TO_BB(mp, mp->m_attr_geo->fsbcount), 0, &child_bp); if (error) return error; error = bp->b_error; That doesn't look right -- I think this should be dereferencing child_bp, not bp. Looking through the codebase history, I think this was added by commit 2911edb ("xfs: remove the mappedbno argument to xfs_da_get_buf"), which replaced a call to xfs_da_get_buf with the current call to xfs_trans_get_buf. Not sure why we trans_brelse'd @bp earlier in the function, but I'm guessing it's to avoid pinning too many buffers in memory while we inactivate the bottom of the attr tree. Hence we now have to get the buffer back. I /think/ this was supposed to check child_bp->b_error and fail the rest of the invalidation if child_bp had experienced any kind of IO or corruption error. I bet the xfs_da3_node_read earlier in the loop will catch most cases of incoming on-disk corruption which makes this check mostly moot unless someone corrupts the buffer and the AIL pushes it out to disk while the buffer's unlocked. In the first case we'll never get to the bad check, and in the second case the AIL will shut down the log, at which point there's no reason to check b_error. Remove the check, and null out @bp to avoid this problem in the future. Cc: hch@lst.de Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 2911edb ("xfs: remove the mappedbno argument to xfs_da_get_buf") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 146a15b upstream. Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly byte-swap NOP when compiling for big-endian, and the resulting series of bytes happened to match the encoding of FNMADD S21, S30, S0, S0. This went unnoticed until commit: 34f66c4 ("arm64: Use a positive cpucap for FP/SIMD") Prior to that commit, the kernel would always enable the use of FPSIMD early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of FNMADD within the kernel was not detected, but could result in the corruption of user or kernel FPSIMD state. After that commit, the instructions happen to trap during boot prior to FPSIMD being detected and enabled, e.g. | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __pi_strcmp+0x1c/0x150 | lr : populate_properties+0xe4/0x254 | sp : ffffd014173d3ad0 | x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000 | x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008 | x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044 | x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005 | x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000 | x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000 | x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000 | x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a | x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x13c/0x340 | el1t_64_irq_handler+0x0/0x1c | el1_abort+0x0/0x5c | el1h_64_sync+0x64/0x68 | __pi_strcmp+0x1c/0x150 | unflatten_dt_nodes+0x1e8/0x2d8 | __unflatten_device_tree+0x5c/0x15c | unflatten_device_tree+0x38/0x50 | setup_arch+0x164/0x1e0 | start_kernel+0x64/0x38c | __primary_switched+0xbc/0xc4 Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked commit. Closes: ClangBuiltLinux#1948 Link: llvm/llvm-project@1379b15 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e14aec2 upstream. Fix kernel crash in AP bus code caused by very early invocation of the config change callback function via SCLP. After a fresh IML of the machine the crypto cards are still offline and will get switched online only with activation of any LPAR which has the card in it's configuration. A crypto card coming online is reported to the LPAR via SCLP and the AP bus offers a callback function to get this kind of information. However, it may happen that the callback is invoked before the AP bus init function is complete. As the callback triggers a synchronous AP bus scan, the scan may already run but some internal states are not initialized by the AP bus init function resulting in a crash like this: [ 11.635859] Unable to handle kernel pointer dereference in virtual kernel address space [ 11.635861] Failing address: 0000000000000000 TEID: 0000000000000887 [ 11.635862] Fault in home space mode while using kernel ASCE. [ 11.635864] AS:00000000894c4007 R3:00000001fece8007 S:00000001fece7800 P:000000000000013d [ 11.635879] Oops: 0004 ilc:1 [#1] SMP [ 11.635882] Modules linked in: [ 11.635884] CPU: 5 PID: 42 Comm: kworker/5:0 Not tainted 6.6.0-rc3-00003-g4dbf7cdc6b42 #12 [ 11.635886] Hardware name: IBM 3931 A01 751 (LPAR) [ 11.635887] Workqueue: events_long ap_scan_bus [ 11.635891] Krnl PSW : 0704c00180000000 0000000000000000 (0x0) [ 11.635895] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 11.635897] Krnl GPRS: 0000000001000a00 0000000000000000 0000000000000006 0000000089591940 [ 11.635899] 0000000080000000 0000000000000a00 0000000000000000 0000000000000000 [ 11.635901] 0000000081870c00 0000000089591000 000000008834e4e2 0000000002625a00 [ 11.635903] 0000000081734200 0000038000913c18 000000008834c6d6 0000038000913ac8 [ 11.635906] Krnl Code:>0000000000000000: 0000 illegal [ 11.635906] 0000000000000002: 0000 illegal [ 11.635906] 0000000000000004: 0000 illegal [ 11.635906] 0000000000000006: 0000 illegal [ 11.635906] 0000000000000008: 0000 illegal [ 11.635906] 000000000000000a: 0000 illegal [ 11.635906] 000000000000000c: 0000 illegal [ 11.635906] 000000000000000e: 0000 illegal [ 11.635915] Call Trace: [ 11.635916] [<0000000000000000>] 0x0 [ 11.635918] [<000000008834e4e2>] ap_queue_init_state+0x82/0xb8 [ 11.635921] [<000000008834ba1c>] ap_scan_domains+0x6fc/0x740 [ 11.635923] [<000000008834c092>] ap_scan_adapter+0x632/0x8b0 [ 11.635925] [<000000008834c3e4>] ap_scan_bus+0xd4/0x288 [ 11.635927] [<00000000879a33ba>] process_one_work+0x19a/0x410 [ 11.635930] Discipline DIAG cannot be used without z/VM [ 11.635930] [<00000000879a3a2c>] worker_thread+0x3fc/0x560 [ 11.635933] [<00000000879aea60>] kthread+0x120/0x128 [ 11.635936] [<000000008792afa4>] __ret_from_fork+0x3c/0x58 [ 11.635938] [<00000000885ebe62>] ret_from_fork+0xa/0x30 [ 11.635942] Last Breaking-Event-Address: [ 11.635942] [<000000008834c6d4>] ap_wait+0xcc/0x148 This patch improves the ap_bus_force_rescan() function which is invoked by the config change callback by checking if a first initial AP bus scan has been done. If not, the force rescan request is simple ignored. Anyhow it does not make sense to trigger AP bus re-scans even before the very first bus scan is complete. Cc: stable@vger.kernel.org Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bb32500 upstream. The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty torvalds#186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Fixes: f5ca233 ("tracing: Increase trace array ref count on enable and filter files") Reported-by: Beau Belgrave <beaub@linux.microsoft.com> Tested-by: Beau Belgrave <beaub@linux.microsoft.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fc43e9c ] hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 torvalds#257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ] Fixes: cd667ce ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi <be286@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7bf9a6b ] xen_vcpu_info is a percpu area than needs to be mapped by Xen. Currently, it could cross a page boundary resulting in Xen being unable to map it: [ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164! [ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Fix the issue by using __alloc_percpu and requesting alignment for the memory allocation. Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop Fixes: 24d5373 ("arm/xen: Use alloc_percpu rather than __alloc_percpu") Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 768d612 ] Yikebaer reported an issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894 Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438 CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 #1 Call Trace: [...] kasan_report+0xba/0xf0 mm/kasan/report.c:588 ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] Allocated by task 8438: [...] kmem_cache_zalloc include/linux/slab.h:693 [inline] __es_alloc_extent fs/ext4/extents_status.c:469 [inline] ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] Freed by task 8438: [...] kmem_cache_free+0xec/0x490 mm/slub.c:3823 ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline] __es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802 ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] ================================================================== The flow of issue triggering is as follows: 1. remove es raw es es removed es1 |-------------------| -> |----|.......|------| 2. insert es es insert es1 merge with es es1 merge with es and free es1 |----|.......|------| -> |------------|------| -> |-------------------| es merges with newes, then merges with es1, frees es1, then determines if es1->es_len is 0 and triggers a UAF. The code flow is as follows: ext4_es_insert_extent es1 = __es_alloc_extent(true); es2 = __es_alloc_extent(true); __es_remove_extent(inode, lblk, end, NULL, es1) __es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree __es_insert_extent(inode, &newes, es2) ext4_es_try_to_merge_right ext4_es_free_extent(inode, es1) ---> es1 is freed if (es1 && !es1->es_len) // Trigger UAF by determining if es1 is used. We determine whether es1 or es2 is used immediately after calling __es_remove_extent() or __es_insert_extent() to avoid triggering a UAF if es1 or es2 is freed. Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com> Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com Fixes: 2a69c45 ("ext4: using nofail preallocation in ext4_es_insert_extent()") Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230815070808.3377171-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Stable-dep-of: 8e387c8 ("ext4: make sure allocate pending entry not fail") Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2faac25 upstream. We get a kernel crash about "unable to handle kernel paging request": ```dmesg [368033.032005] BUG: unable to handle kernel paging request at ffffffffad9ae4b5 [368033.032007] PGD fc3a0d067 P4D fc3a0d067 PUD fc3a0e063 PMD 8000000fc38000e1 [368033.032012] Oops: 0003 [#1] SMP PTI [368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.es8_24.x86_64 #1 [368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017 [368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 [368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93 ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02 [368033.032031] RSP: 0018:ffffbb48852abe00 EFLAGS: 00010082 [368033.032032] RAX: ffffffffad9ae4b5 RBX: 0000000000000246 RCX: 0000000000003bf3 [368033.032033] RDX: ffff97b0ff8e3dc0 RSI: 0000000000600000 RDI: ffffbb4884743c68 [368033.032034] RBP: 0000000000000001 R08: 0000000000000000 R09: 000007ffffffffff [368033.032035] R10: ffffbb486bb01000 R11: 0000000000000001 R12: ffffffffc068da70 [368033.032036] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [368033.032038] FS: 0000000000000000(0000) GS:ffff97b0ff8c0000(0000) knlGS:0000000000000000 [368033.032039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [368033.032040] CR2: ffffffffad9ae4b5 CR3: 0000000fc3a0a002 CR4: 00000000003626e0 [368033.032042] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set 8cff3c36-4a76-4242-afaa-7630206bc70b [368033.032045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [368033.032046] Call Trace: [368033.032054] _raw_spin_lock_irqsave+0x32/0x40 [368033.032061] __wake_up_common_lock+0x63/0xc0 [368033.032073] ? bch_ptr_invalid+0x10/0x10 [bcache] [368033.033502] bch_dirty_init_thread+0x14c/0x160 [bcache] [368033.033511] ? read_dirty_submit+0x60/0x60 [bcache] [368033.033516] kthread+0x112/0x130 [368033.033520] ? kthread_flush_work_fn+0x10/0x10 [368033.034505] ret_from_fork+0x35/0x40 ``` The crash occurred when call wake_up(&state->wait), and then we want to look at the value in the state. However, bch_sectors_dirty_init() is not found in the stack of any task. Since state is allocated on the stack, we guess that bch_sectors_dirty_init() has exited, causing bch_dirty_init_thread() to be unable to handle kernel paging request. In order to verify this idea, we added some printing information during wake_up(&state->wait). We find that "wake up" is printed twice, however we only expect the last thread to wake up once. ```dmesg [ 994.641004] alcache: bch_dirty_init_thread() wake up [ 994.641018] alcache: bch_dirty_init_thread() wake up [ 994.641523] alcache: bch_sectors_dirty_init() init exit ``` There is a race. If bch_sectors_dirty_init() exits after the first wake up, the second wake up will trigger this bug("unable to handle kernel paging request"). Proceed as follows: bch_sectors_dirty_init kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0]) ... ... atomic_inc(&state.started) ... ... ... atomic_read(&state.enough) ... ... atomic_set(&state->enough, 1) kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1]) ... atomic_dec_and_test(&state->started) ... atomic_inc(&state.started) ... ... ... wake_up(&state->wait) ... atomic_read(&state.enough) atomic_dec_and_test(&state->started) ... ... wait_event(state.wait, atomic_read(&state.started) == 0) ... return ... wake_up(&state->wait) We believe it is very common to wake up twice if there is no dirty, but crash is an extremely low probability event. It's hard for us to reproduce this issue. We attached and detached continuously for a week, with a total of more than one million attaches and only one crash. Putting atomic_inc(&state.started) before kthread_run() can avoid waking up twice. Fixes: b144e45 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20231120052503.6122-8-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb STMicroelectronics#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 STMicroelectronics#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 STMicroelectronics#15 [ffff88aa841efb88] device_del at ffffffff82179d23 STMicroelectronics#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] STMicroelectronics#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] STMicroelectronics#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a STMicroelectronics#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff STMicroelectronics#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 STMicroelectronics#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2b3a7a3 upstream. The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED in snd_pcm_state_names. This patch adds the missing entry to resolve this issue. cat /proc/asound/card2/pcm0p/sub0/status That results in stack traces like the following: [ 99.702732][ T5171] Unexpected kernel BRK exception at EL1 [ 99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP [ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...) [ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1 [ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT) [ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc [ 99.750778][ T5171] sp : ffffffc0175abae0 [ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498 [ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8 [ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60 [ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400 [ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00 [ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058 [ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000 [ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda [ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e [ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0 [ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008 [ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f [ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70 [ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001 [ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000 [ 99.759123][ T5171] Call trace: [ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4 [ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4 [ 99.760770][ T5171] seq_read+0xf0/0x128 [ 99.761117][ T5171] proc_reg_read+0x100/0x1f8 [ 99.761515][ T5171] vfs_read+0xf4/0x354 [ 99.761869][ T5171] ksys_read+0x7c/0x148 [ 99.762226][ T5171] __arm64_sys_read+0x20/0x30 [ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4 [ 99.763023][ T5171] el0_svc+0x28/0x98 [ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0 [ 99.763759][ T5171] el0_sync+0x1b8/0x1c0 [ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240) [ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]--- [ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d5dba32 ] As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f99cd56 ] syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty torvalds#135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> <SEQ=100><CTL=SYN> ... 3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT 4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED 5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack // TCP A: <SND.UNA=101> 8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2dcf5fd upstream. For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: <stable@kernel.org> # 6.4 Fixes: 93cdf49 ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…alid [ Upstream commit f2f11fc ] If smb2 request from client is invalid, The following kernel oops could happen. The patch e2b76ab: "ksmbd: add support for read compound" leads this issue. When request is invalid, It doesn't set anything in the response buffer. This patch add missing set invalid parameter error response. [ 673.085542] ksmbd: cli req too short, len 184 not 142. cmd:5 mid:109 [ 673.085580] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 673.085591] #PF: supervisor read access in kernel mode [ 673.085600] #PF: error_code(0x0000) - not-present page [ 673.085608] PGD 0 P4D 0 [ 673.085620] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 673.085631] CPU: 3 PID: 1039 Comm: kworker/3:0 Not tainted 6.6.0-rc2-tmt STMicroelectronics#16 [ 673.085643] Hardware name: AZW U59/U59, BIOS JTKT001 05/05/2022 [ 673.085651] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 673.085719] RIP: 0010:ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.085808] RAX: 0000000000000000 RBX: ffff88811ade4f00 RCX: 0000000000000000 [ 673.085817] RDX: 0000000000000000 RSI: ffff88810c2a9780 RDI: ffff88810c2a9ac0 [ 673.085826] RBP: ffffc900005e3e00 R08: 0000000000000000 R09: 0000000000000000 [ 673.085834] R10: ffffffffa3168160 R11: 63203a64626d736b R12: ffff8881057c8800 [ 673.085842] R13: ffff8881057c8820 R14: ffff8882781b2380 R15: ffff8881057c8800 [ 673.085852] FS: 0000000000000000(0000) GS:ffff888278180000(0000) knlGS:0000000000000000 [ 673.085864] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 673.085872] CR2: 0000000000000000 CR3: 000000015b63c000 CR4: 0000000000350ee0 [ 673.085883] Call Trace: [ 673.085890] <TASK> [ 673.085900] ? show_regs+0x6a/0x80 [ 673.085916] ? __die+0x25/0x70 [ 673.085926] ? page_fault_oops+0x154/0x4b0 [ 673.085938] ? tick_nohz_tick_stopped+0x18/0x50 [ 673.085954] ? __irq_work_queue_local+0xba/0x140 [ 673.085967] ? do_user_addr_fault+0x30f/0x6c0 [ 673.085979] ? exc_page_fault+0x79/0x180 [ 673.085992] ? asm_exc_page_fault+0x27/0x30 [ 673.086009] ? ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.086067] ? ksmbd_conn_write+0x46/0xc0 [ksmbd] [ 673.086123] handle_ksmbd_work+0x28d/0x4b0 [ksmbd] [ 673.086177] process_one_work+0x178/0x350 [ 673.086193] ? __pfx_worker_thread+0x10/0x10 [ 673.086202] worker_thread+0x2f3/0x420 [ 673.086210] ? _raw_spin_unlock_irqrestore+0x27/0x50 [ 673.086222] ? __pfx_worker_thread+0x10/0x10 [ 673.086230] kthread+0x103/0x140 [ 673.086242] ? __pfx_kthread+0x10/0x10 [ 673.086253] ret_from_fork+0x39/0x60 [ 673.086263] ? __pfx_kthread+0x10/0x10 [ 673.086274] ret_from_fork_asm+0x1b/0x30 Fixes: e2b76ab ("ksmbd: add support for read compound") Reported-by: Tom Talpey <tom@talpey.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 807252f ] Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 torvalds#775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: stable@vger.kernel.org Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 864fb5d ] [ 8743.393379] ====================================================== [ 8743.393385] WARNING: possible circular locking dependency detected [ 8743.393391] 6.4.0-rc1+ #11 Tainted: G OE [ 8743.393397] ------------------------------------------------------ [ 8743.393402] kworker/0:2/12921 is trying to acquire lock: [ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393510] but task is already holding lock: [ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd] [ 8743.393618] which lock already depends on the new lock. [ 8743.393623] the existing dependency chain (in reverse order) is: [ 8743.393628] -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}: [ 8743.393648] down_write_nested+0x9a/0x1b0 [ 8743.393660] filename_create+0x128/0x270 [ 8743.393670] do_mkdirat+0xab/0x1f0 [ 8743.393680] __x64_sys_mkdir+0x47/0x60 [ 8743.393690] do_syscall_64+0x5d/0x90 [ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 8743.393711] -> #0 (sb_writers#8){.+.+}-{0:0}: [ 8743.393728] __lock_acquire+0x2201/0x3b80 [ 8743.393737] lock_acquire+0x18f/0x440 [ 8743.393746] mnt_want_write+0x5f/0x240 [ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd] [ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd] [ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd] [ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd] [ 8743.394187] process_one_work+0x65a/0xb30 [ 8743.394198] worker_thread+0x2cf/0x700 [ 8743.394209] kthread+0x1ad/0x1f0 [ 8743.394218] ret_from_fork+0x29/0x50 This patch add mnt_want_write() above parent inode lock and remove nested mnt_want_write calls in smb2_open(). Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Cc: stable@vger.kernel.org Reported-by: Marios Makassikis <mmakassikis@freebox.fr> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify rpsmg_sdb driver to add ioctl for reading physical address of …

52f684f

…sdb buffer for transfer to CM4

mcarlin-ds merged commit 53a4ee9 into develop-r2.1 May 19, 2021

mcarlin-ds deleted the rpmsg-report-physaddr branch May 19, 2021 21:45

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Modify rpsmg_sdb driver #1

Modify rpsmg_sdb driver #1

mcarlin-ds commented May 19, 2021

Modify rpsmg_sdb driver #1

Modify rpsmg_sdb driver #1

Conversation

mcarlin-ds commented May 19, 2021