arduino-uno-5LED-loop

Description:

A Sketchbook based on a YouTube tutorial, lights up and loops 5 LEDs in sequence.

Requirements:

• Arduino Uno
• USB Cable
• Arduino IDE
• Some C++ knowledge (If you want to modify or hack this)
• 5 x 200Ω Resistors
• 5 x Green Jumper Cables
• 1 x Breadboard
• 1 x Black Jumper Cable (Ground)
• 5 x LED's (For this I used: Green, Red, Yellow, Blue + One RGB Diode)

Instructions:

• Open the .ido file in your Arduino IDE, Verify and then Upload it.
• Press Reset if required to clear it and run the new code.
• Enjoy your blinking colorful LED's! :)

Pin Layout:

• LED1 -> Board Pin 13
• LED2 -> Board Pin 12
• LED3 -> Board Pin 11
• LED4 -> Board Pin 10
• LED5 -> Board Pin 9

Original YouTube Video: /watch?v=e1FVSpkw6q4