RaspJack, a port of MouseJack for Raspberry Pi 2

How to install

$ sudo python setup.py install

Raspberry Pi setup

Connect the following pins (rasp) to the associated pins (nrf24):

RASP	NRF24L01
17	2
18	8
19	6
20	1
21	7
22	3
23	5
24	4

Dependencies

RaspJack relies on pynrf24 to drive the NRF24L01+ module through SPI. This dependency is mandatory and installed as follows:

$ git clone https://github.com/jpbarraca/pynrf24.git
$ cd pynrf24
$ sudo python setup.py install

How to use

The rj-scanner tool may be used to identify available devices (40bits MAC address, channel and payloads), while rj-sniffer is able to sniff most of the packets sent to a specific device.

Examples:

pi@raspberrypi:/tmp $ rj-scanner 
08 | 37:48:9b:89:09 | 
08 | 37:48:9b:89:09 | 00 c2 00 00 05 a0 ff 00 00 9a
08 | 37:48:9b:89:09 | 00 c2 00 00 01 b0 ff 00 00 8e
08 | 37:48:9b:89:09 | 00 c2 00 00 06 b0 ff 00 00 89
08 | 37:48:9b:89:09 | 

pi@raspberrypi:/tmp $ rj-sniffer -t 37:48:9b:89:09
08 | 37:48:9b:89:09 | 00 c2 00 00 04 50 00 00 00 ea
08 | 37:48:9b:89:09 | 72 c5 54 5b 02 10 49 40 56 01
08 | 37:48:9b:89:09 | 00 c2 00 00 04 40 00 00 00 fa
08 | 37:48:9b:89:09 | 00 c2 00 00 04 50 00 00 00 ea
08 | 37:48:9b:89:09 | 00 c2 00 00 05 30 00 00 00 09
08 | 37:48:9b:89:09 | 00 c2 00 00 04 40 00 00 00 fa
08 | 37:48:9b:89:09 | 00 c2 00 00 05 10 00 00 00 29
08 | 37:48:9b:89:09 | 00 c2 00 00 05 30 00 00 00 09
08 | 37:48:9b:89:09 | 00 c2 00 00 06 10 00 00 00 28
08 | 37:48:9b:89:09 | 00 c2 00 00 05 10 00 00 00 29
08 | 37:48:9b:89:09 | 00 c2 00 00 06 00 00 00 00 38