Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Jumper T20S Customizable Switches #4189

Closed
1 task done
Morbidfpv opened this issue Oct 10, 2023 · 15 comments
Closed
1 task done

Jumper T20S Customizable Switches #4189

Morbidfpv opened this issue Oct 10, 2023 · 15 comments
Labels
enhancement ✨ New feature or request

Comments

@Morbidfpv
Copy link

Is there an existing issue for this feature request?

  • I have searched the existing issues

Is your feature request related to a problem?

Not really a problem but I did see a github request where a user was talking about the 6 switches on the front/bottom of this radio. They were saying the acted like a 6 position switch, ex: kinda like Radiomaster tx16s 6-postion switch. That user wanted them to act more like individual switches.
With the verision I have that is currently how they act like individual switches that can be set to toggle/2-position switches.
I'd actually like for those 6 switches to be one 6-position switch just like the TX16s. Is that possible?

Describe the solution you'd like

Have a way to make the 6 customizable switches to be one 6-postion switch. Currently they're indiviual switches as far as i can tell.

Describe alternatives you've considered

No response

Additional context

No response
@Morbidfpv Morbidfpv added the enhancement ✨ New feature or request label Oct 10, 2023
@Scachi
Copy link

Scachi commented Oct 10, 2023

That one ? #3984
By adjusting that numbers (1 or 2 in the screenshot) you can put them into the same group where a button press will then turn off the other custom button states of the same group.

@Morbidfpv
Copy link
Author

Morbidfpv commented Oct 10, 2023 via email

@Scachi
Copy link

Scachi commented Oct 10, 2023 •
edited
Loading

Set the button type to 2 pos and assign them all the same group number 1 should work.
the default model that was set in the radio had those buttons configured like that.

@Morbidfpv
Copy link
Author

Morbidfpv commented Oct 10, 2023 via email

@Scachi
Copy link

Scachi commented Oct 10, 2023

Sorry, my fault. I didn't understand you question correctly at first.
I hope someone else can help you with a correct solution.
Perhaps you can use special functions to override your channel of choice and set it to a value depending on what switch is active.

@Morbidfpv
Copy link
Author

Morbidfpv commented Oct 10, 2023 via email

@pfeerick
Copy link
Member

pfeerick commented Oct 11, 2023 •
edited
Loading

Support is already present in the nightlies, and I think at the present time the way to do what you want would be via a mixer line that detects which button is active, and sets the value accordingly. I have seen that config posted somewhere, I just can't remember where off the top of my head.

@Morbidfpv
Copy link
Author

Support is already present in the nightlies, and I think at the present time the way to do what you want would be via a mixer line that detects which button is active, and sets the value accordingly. I have seen that config posted somewhere, I just can't remember where off the top of my head.

Oh, that's good. Thank you for letting me know.

@Morbidfpv
Copy link
Author

Morbidfpv commented Oct 11, 2023 via email

@pfeerick
Copy link
Member

CYC1 - CYC3 are the cyclic mixes for heli ;)

You could try something like this - six mixer lines, five of which simply replace the other one depending on the switch that is active. However, I'm sure it was JC who mentioned a much neater way to do this. Or am I wrong? @3djc

image

@Morbidfpv
Copy link
Author

CYC1 - CYC3 are the cyclic mixes for heli ;)

You could try something like this - six mixer lines, five of which simply replace the other one depending on the switch that is active. However, I'm sure it was JC who mentioned a much neater way to do this. Or am I wrong? @3djc

image

Dude thank you! I don't know what up with mixes etc. This worked, just had to set the offset for the bottom 3 lines to be from top to bottom -40%, -20%, 0%. Thanks again, for now this looks like it should to the trick.

@3djc
Copy link
Collaborator

3djc commented Oct 11, 2023

They are 6 'distinct' buttons therefore can really not be used like a pot (what older 6pos is). So yes it requires mix lines, but also rethink the way you use and send those (it might, or not, make sense to send all 6 on only one channel)

@3djc
Copy link
Collaborator

3djc commented Oct 11, 2023

Closing the issue since the software already features what's asked. There is an Otx wiki covering this here: https://github.com/opentx/opentx/wiki/Function-switches.

I think there is an edgetx one, but I can't seem to find it again

@3djc 3djc closed this as completed Oct 11, 2023
@pfeerick
Copy link
Member

No problem. I'll just leave this here then as one possible solution to the "function switches as 6POS" question some people with have for the Jumper T-Pro/T20. One more tip: enable the checkbox at the end of one of the function switches lines, so that one switch in the group must be always on... otherwise if you press on the active button a second time, the output will jump to 0% / middle as all the switches in the group are now off.

Function Switch settings (default, except for Always On is set):
image

Mixer setup: (note that the last line is offset 0, which is the default).
image

@Morbidfpv
Copy link
Author

Morbidfpv commented Oct 11, 2023 via email

@pfeerick pfeerick mentioned this issue Nov 4, 2023
Merged
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
enhancement ✨ New feature or request
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@3djc @pfeerick @Scachi @Morbidfpv