Horus X10S Express: MPM switching off telemetry no longer works

[ParkerEde]

Is there an existing issue for this problem?

• I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

I am using a Horus X10S Express with an external MPM 4in1 irange+ with a Blade130S. Telemetry can be switched off in the DSM protocol options. Since 2.10.? you can set the switch to deactivated, but the telemetry remains active. However, since the problem with telemetry is that the serial connection to the MPM is sporadically lost when telemetry is active, disabling telemetry is the last solution for flying a Blade130S or 230S in combination with the Horus X10S Express and the MPM. See: #4411

Expected Behavior

Telemetry should be able to be switched off again

Steps To Reproduce

Bind with DSM RX with telemetry, open DSM Option in MPM, deaktivate Telemetry, observe there is still telemetry activ.

Version

2.10.2

Transmitter

FrSky X10 Express / X10S Express (ACCESS)

Operating System (OS)

No response

OS Version

No response

Anything else?

No response

[3djc]

Could you test with this
x10e-test.zip

[ParkerEde]

@3djc
that works.

[3djc]

@3djc that works.

Cool, I have made a 2.10 based version if you want to use it (previous was based on main, so inherently less stable)
x10e-test.zip

[ParkerEde]

wow, great. Thx. Could we have this fix official in 2.10.3?