everyauth

Authentication and authorization (password, facebook, & more) for your node.js Connect and Express apps.

There is a NodeTuts screencast of everyauth here

There is also a Google Groups (recently created) here to post questions and discuss potential ideas and extensions to the library.

So far, everyauth enables you to login via:

Authenticate Via	Credits
Password
Facebook
Twitter
Google
Google Hybrid	RocketLabs Development
LinkedIn
Dropbox	Torgeir
Tumblr
Evernote	Danny Amey
Github
Instagram
Foursquare
Yahoo!
Justin.tv	slickplaid
Vimeo	slickplaid
37signals (Basecamp, Highrise, Backpack, Campfire)
Readability	Alfred Nerstu
AngelList
Dwolla	Kenan Shifflett
OpenStreetMap	Christoph Giesel
VKontakte (Russian Social Network)	Alexey Simonenko
Mail.ru (Russian Social Network)	Alexey Gordeyev
Skyrock	Rodolphe Stoclin
Gowalla	Andrew Kramolisch
TripIt	Damian Krzeminski
500px	Danny Amey
SoundCloud	Chris Leishman
mixi	ufssf
Mailchimp	Winfred Nadeau
Meetup	Jonathan Altman
Mendeley	Eduard Baun
Smarterer	kaizenpack
RunKeeper	Alexis Kinsella
Box.net
OpenId	RocketLabs Development, Andrew Mee, Brian Noguchi
LDAP (experimental; not production-tested)
Windows Azure Access Control Service (ACS)	Dario Renzulli, Juan Pablo Garcia, Matias Woloski from Southworks
Dailycred	Hank Stoever at Dailycred.com
Sina Weibo	justan

everyauth is:

Modular - We have you covered with Facebook and Twitter OAuth logins, basic login/password support, and modules coming soon for beta invitation support and more.
Easily Configurable - everyauth was built with powerful configuration needs in mind. Configure an authorization strategy in a straightforward, easy-to-read & easy-to-write approach, with as much granularity as you want over the steps and logic of your authorization strategy.
Idiomatic - The syntax for configuring and extending your authorization strategies are idiomatic and chainable.

Installation

If you are using Connect 1.x or Express 2.x, install via:

$ npm install everyauth

If you are using Express 3.x, either install via:

$ npm install git://github.com/bnoguchi/everyauth.git#express3

Or if the git protocol is blocked, install via:

$ npm install https://github.com/bnoguchi/everyauth/archive/express3.tar.gz

Quick Start

Using everyauth comes down to just 2 simple steps if using Connect or 3 simple steps if using Express:

Choose and Configure Auth Strategies - Find the authentication strategy you desire in one of the sections below. Follow the configuration instructions.

Add the Middleware to Connect

var everyauth = require('everyauth');
// Step 1 code goes here

// Step 2 code
var connect = require('connect');
var app = connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'mr ripley'})
  , everyauth.middleware()
  , connect.router(routes)
);

Add View Helpers to Express
```
// Step 1 code
// ...
// Step 2 code
// ...

// Step 3 code
everyauth.helpExpress(app);

app.listen(3000);
```
For more about what view helpers everyauth adds to your app, see the section titled "Express Helpers" near the bottom of this README.

Example Application

There is an example application at ./example

To run it:

$ cd example
$ node server.js

Important - Some OAuth Providers do not allow callbacks to localhost, so you will need to create a localhost alias called local.host. Make sure you set up your /etc/hosts so that 127.0.0.1 is also associated with 'local.host'. So inside your /etc/hosts file, one of the lines will look like:

127.0.0.1	localhost local.host

Then point your browser to http://local.host:3000

Tests

$ npm install everyauth --dev

Then, update test/creds.js with credentials that the integration tests use to login to each 3rd party service.

$ make test

Accessing the User

If you are using express or connect, then everyauth provides an easy way to access the user as:

req.user from your app server
everyauth.user via the everyauth helper accessible from your express views.
user as a helper accessible from your express views

To access the user, configure everyauth.everymodule.findUserById and optionally everyauth.everymodule.userPkey. For example, using mongoose:

everyauth.everymodule.findUserById( function (userId, callback) {
  User.findById(userId, callback);
  // callback has the signature, function (err, user) {...}
});

If you need access to the request object the function can have three arguments:

everyauth.everymodule.findUserById( function (req, userId, callback) {

  // use the request in some way ...

  // callback has the signature, function (err, user) {...}
});

Once you have configured this method, you now have access to the user object that was fetched anywhere in your server app code as req.user. For instance:

var app = require('express').createServer()

// Configure your app

app.get('/', function (req, res) {
  console.log(req.user);  // FTW!
  res.render('home');
});

Moreover, you can access the user in your views as everyauth.user or as user.

//- Inside ./views/home.jade
span.user-id= everyauth.user.name
#user-id= user.id

everyauth assumes that you store your users with an id property. If not -- e.g, if you adopt the convention user.uid over user.id -- then just make sure to configure the everyauth.everymodule.userPkey parameter:

everyauth.everymodule.userPkey('uid');

Express Helpers

If you are using express, everyauth comes with some useful dynamic helpers. To enable them:

var express = require('express')
  , everyauth = require('everyauth')
  , app = express.createServer();

everyauth.helpExpress(app);

Then, from within your views, you will have access to the following helpers methods attached to the helper, everyauth:

everyauth.loggedIn
everyauth.user - the User document associated with the session
everyauth.facebook - The is equivalent to what is stored at req.session.auth.facebook, so you can do things like ...
everyauth.facebook.user - returns the user json provided from the OAuth provider.
everyauth.facebook.accessToken - returns the access_token provided from the OAuth provider for authorized API calls on behalf of the user.
And you also get this pattern for other modules - e.g., everyauth.twitter.user, everyauth.github.user, etc.

You also get access to the view helper

user - the same as everyauth.user above

As an example of how you would use these, consider the following ./views/user.jade jade template:

.user-id
  .label User Id
  .value #{user.id}
.facebook-id
  .label User Facebook Id
  .value #{everyauth.facebook.user.id}

If you already have an express helper named user, then you can configure everyauth to use a different helper name to access the user object that everyauth manages. To do so, leverage the userAlias option for everyauth.helpExpress:

everyauth.helpExpress(app, { userAlias: '__user__' });

Then, you could access the user object in your view with the helper __user__ instead of the default helper user. So you can compare with the default use of helpers given previously, the alternative leveraging userAlias would look like:

.user-id
  .label User Id
  .value #{__user__.id}
.facebook-id
  .label User Facebook Id
  .value #{everyauth.facebook.user.id}

everyauth also provides convenience methods on the ServerRequest instance req. From any scope that has access to req, you get the following convenience getters and methods:

req.loggedIn - a Boolean getter that tells you if the request is by a logged in user
req.user - the User document associated with the session
req.logout() - clears the sesion of your auth data

Logging Out

If you integrate everyauth with connect, then everyauth automatically sets up a logoutPath at GET /logout for your app. It also sets a default handler for your logout route that clears your session of auth information and redirects them to '/'.

To over-write the logout path:

everyauth.everymodule.logoutPath('/bye');

To over-write the logout redirect path:

everyauth.everymodule.logoutRedirectPath('/navigate/to/after/logout');

To over-write the logout handler:

everyauth.everymodule.handleLogout( function (req, res) {
  // Put you extra logic here
  
  req.logout(); // The logout method is added for you by everyauth, too
  
  // And/or put your extra logic here
  
  this.redirect(res, this.logoutRedirectPath());
});

Custom redirect on password-based login or registration

You may want your own callback that decides where to send a user after login or registration. One way of doing this is with the respondToLoginSucceed and respondToRegistrationSucceed methods. This assumes that you have set a .redirectTo property on your req.session object:

everyauth.password
  .respondToLoginSucceed( function (res, user, data) {
    if (user) {
      this.redirect(res, data.session.redirectTo)
    }   
  })
  .respondToRegistrationSucceed( function (res, user, data) {
    this.redirect(res, data.session.redirectTo)
  })

If you are using express and want your redirects to be subject to express redirect mapping, you can overwrite redirect method employed by everyauth.

everyauth.everymodule
  .performRedirect( function (res, location) {
    res.redirect(location, 303);
  });

A newly defined method will be used by everyauth to perform all redirects.

Auth Strategy Instructions

Facebook Connect

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.facebook
  .appId('YOUR APP ID HERE')
  .appSecret('YOUR APP SECRET HERE')
  .handleAuthCallbackError( function (req, res) {
    // If a user denies your app, Facebook will redirect the user to
    // /auth/facebook/callback?error_reason=user_denied&error=access_denied&error_description=The+user+denied+your+request.
    // This configurable route handler defines how you want to respond to
    // that.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokExtra, fbUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.facebook
  .entryPath('/auth/facebook')
  .callbackPath('/auth/facebook/callback')
  .scope('email')                        // Defaults to undefined
  .fields('id,name,email,picture')       // Controls the returned fields. Defaults to undefined

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.facebook.scope(); // undefined
everyauth.facebook.fields(); // undefined
everyauth.facebook.entryPath(); // '/auth/facebook'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.facebook.configurable();

Dynamic Facebook Connect Scope

Facebook provides many different permissions for which your app can ask your user. This is bundled up in the scope query paremter sent with the oauth request to Facebook. While your app may require several different permissions from Facebook, Facebook recommends that you only ask for these permissions incrementally, as you need them. For example, you might want to only ask for the "email" scope upon registration. At the same time, for another user, you may want to ask for "user_status" permissions because they have progressed further along in your application.

everyauth enables you to specify the "scope" dynamically with a second variation of the configurable scope. In addition to the first variation that looks like:

everyauth.facebook
  .scope('email,user_status');

you can have greater dynamic control over "scope" via the second variation of scope:

everyauth.facebook
  .scope( function (req, res) {
    var session = req.session;
    switch (session.userPhase) {
      case 'registration':
        return 'email';
      case 'share-media':
        return 'email,user_status';
    }
  });

Facebook Mobile OAuth Dialog

If you are programming for mobile, you can bring up the facebook mobile OAuth dialog instead of the traditional desktop browser-based one by just adding mobile(true) to your configuration as seen here:

everyauth.facebook
  .mobile(true)
  .appId('YOUR APP ID HERE')
  .appSecret('YOUR APP SECRET HERE')
  // rest of configuration

Facebook Canvas Pages

For apps that can be embedded in Facebook via the canvas page, you can use the facebookCanvas submodule:

everyauth.facebookCanvas
  .canvasPath('CANVAS URL MINUS HOSTNAME') // Default is '/auth/facebook/canvas'
  .canvasPage('CANVAS PAGE'); // Generally http://apps.facebook.com/APP-NAME

Note that you must also configure the usual Facebook configurations described above in order for this to work.

You can tell if the user logged in via the canvas interface using the following test:

if (everyauth.facebookCanvas) {
  // Do something different
}

Twitter OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.twitter
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, twitterUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Important - Some developers forget to do the following, and it causes them to have issues with everyauth. Please make sure to do the following: When you set up your app at http://dev.twitter.com/, make sure that your callback url is set up to include that path '/auth/twitter/callback/'. In general, when dealing with OAuth or OAuth2 modules provided by everyauth, the default callback path is always set up to follow the pattern '/auth/#{moduleName}/callback', so just ensure that you configure your OAuth settings accordingly with the OAuth provider -- in this case, the "Edit Application Settings" section for your app at http://dev.twitter.com.

Alternatively, you can specify the callback url at the application level by configuring callbackPath (which has a default configuration of "/auth/twitter/callback"):

everyauth.twitter
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .callbackPath('/custom/twitter/callback/path')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, twitterUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

So if your hostname is example.com, then this configuration will over-ride the dev.twitter.com callback url configuration. Instead, Twitter will redirect back to example.com/custom/twitter/callback/path in the example just given above.

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.twitter
  .entryPath('/auth/twitter')
  .callbackPath('/auth/twitter/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.twitter.callbackPath(); // '/auth/twitter/callback'
everyauth.twitter.entryPath(); // '/auth/twitter'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.twitter.configurable();

Password Authentication

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.password
  .getLoginPath('/login') // Uri path to the login page
  .postLoginPath('/login') // Uri path that your login form POSTs to
  .loginView('a string of html; OR the name of the jade/etc-view-engine view')
  .authenticate( function (login, password) {
    // Either, we return a user or an array of errors if doing sync auth.
    // Or, we return a Promise that can fulfill to promise.fulfill(user) or promise.fulfill(errors)
    // `errors` is an array of error message strings
    //
    // e.g., 
    // Example 1 - Sync Example
    // if (usersByLogin[login] && usersByLogin[login].password === password) {
    //   return usersByLogin[login];
    // } else {
    //   return ['Login failed'];
    // }
    //
    // Example 2 - Async Example
    // var promise = this.Promise()
    // YourUserModel.find({ login: login}, function (err, user) {
    //   if (err) return promise.fulfill([err]);
    //   promise.fulfill(user);
    // }
    // return promise;
  })
  .loginSuccessRedirect('/') // Where to redirect to after a login
  
    // If login fails, we render the errors via the login view template,
    // so just make sure your loginView() template incorporates an `errors` local.
    // See './example/views/login.jade'

  .getRegisterPath('/register') // Uri path to the registration page
  .postRegisterPath('/register') // The Uri path that your registration form POSTs to
  .registerView('a string of html; OR the name of the jade/etc-view-engine view')
  .validateRegistration( function (newUserAttributes) {
    // Validate the registration input
    // Return undefined, null, or [] if validation succeeds
    // Return an array of error messages (or Promise promising this array)
    // if validation fails
    //
    // e.g., assuming you define validate with the following signature
    // var errors = validate(login, password, extraParams);
    // return errors;
    //
    // The `errors` you return show up as an `errors` local in your jade template
  })
  .registerUser( function (newUserAttributes) {
    // This step is only executed if we pass the validateRegistration step without
    // any errors.
    //
    // Returns a user (or a Promise that promises a user) after adding it to
    // some user store.
    //
    // As an edge case, sometimes your database may make you aware of violation
    // of the unique login index, so if this error is sent back in an async
    // callback, then you can just return that error as a single element array
    // containing just that error message, and everyauth will automatically handle
    // that as a failed registration. Again, you will have access to this error via
    // the `errors` local in your register view jade template.
    // e.g.,
    // var promise = this.Promise();
    // User.create(newUserAttributes, function (err, user) {
    //   if (err) return promise.fulfill([err]);
    //   promise.fulfill(user);
    // });
    // return promise;
    //
    // Note: Index and db-driven validations are the only validations that occur 
    // here; all other validations occur in the `validateRegistration` step documented above.
  })
  .registerSuccessRedirect('/'); // Where to redirect to after a successful registration

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.password
  .loginFormFieldName('login')       // Defaults to 'login'
  .passwordFormFieldName('password') // Defaults to 'password'
  .loginLayout('custom_login_layout') // Only with `express`
  .registerLayout('custom reg_layout') // Only with `express`
  .loginLocals(fn);                    // See Recipe 3 below

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.password.loginFormFieldName();    // 'login'
everyauth.password.passwordFormFieldName(); // 'password'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.password.configurable();

Password Recipe 1: Extra registration data

Sometimes your registration will ask for more information from the user besides the login and password.

For this particular scenario, you can configure the optional step, extractExtraRegistrationParams.

everyauth.password.extractExtraRegistrationParams( function (req) {
  return {
      phone: req.body.phone
    , name: {
          first: req.body.first_name
        , last: req.body.last_name
      }
  };
});

Then, you will have access to this data from within your configured validateRegistration and registerUser:

everyauth.password
  .validateRegistration( function (newUserAttributes) {
    var phone = newUserAttributes.phone
      , firstName = newUserAttributes.name.first
      , lastName = newUserAttributes.name.last;
  })
  .registerUser( function (newUserAttributes) {
    var phone = newUserAttributes.phone
      , firstName = newUserAttributes.name.first
      , lastName = newUserAttributes.name.last;
  });

Password Recipe 2: Logging in with email or phone number

By default, everyauth uses the field and user key name login during the registration and login process.

Sometimes, you want to use email or phone instead of login. Moreover, you also want to validate email and phone fields upon registration.

everyauth provides an easy way to do this:

everyauth.password.loginWith('email');

// OR

everyauth.password.loginWith('phone');

With simple login configuration like this, you get email (or phone) validation in addition to renaming of the form field and user key corresponding to what otherwise would typically be referred to as 'login'.

Password Recipe 3: Adding additional view local variables to login and registration views

If you are using express, you are able to pass variables from your app context to your view context via local variables. everyauth provides several convenience local vars for your views, but sometimes you will want to augment this set of local vars with additional locals.

So everyauth also provides a mechanism for you to do so via the following configurables:

everyauth.password.loginLocals(...);
everyauth.password.registerLocals(...);

loginLocals and registerLocals configuration have symmetrical APIs, so I will only cover loginLocals here to illustrate how to use both.

You can configure this parameter in one of 3 ways. Why 3? Because there are 3 types of ways that you can retrieve your locals.

Static local vars that never change values:

```javascript
everyauth.password.loginLocals({
  title: 'Login'
});
```

Dynamic synchronous local vars that depend on the incoming request, but whose values are retrieved synchronously

```javascript
everyauth.password.loginLocals( function (req, res) {
  var sess = req.session;
  return {
    isReturning: sess.isReturning
  };
});
```

Dynamic asynchronous local vars

```javascript
everyauth.password.loginLocals( function (req, res, done) {
  asyncCall( function ( err, data) {
    if (err) return done(err);
    done(null, {
      title: il8n.titleInLanguage('Login Page', il8n.language(data.geo))
    });
  });
});
```

Password Recipe 4: Customize Your Registration Validation

By default, everyauth.password automatically

validates that the login (or email or phone, depending on what you authenticate with -- see Password Recipe 2) is present in the login http request,
validates that the password is present
validates that an email login is a correctly formatted email
validates that a phone login is a valid phone number

If any of these validations fail, then the appropriate errors are generated and accessible to you in your view via the errors view local variable.

If you want to add additional validations beyond this, you can do so by configuring the step, validateRegistration:

everyauth.password
  .validateRegistration( function (newUserAttributes, baseErrors) {
    // Here, newUserAttributes is the hash of parameters extracted from the incoming request.
    // baseErrors is the array of errors generated by the default automatic validation outlined above
    //   in this same recipe.

    // First, validate your errors. Here, validateUser is a made up function
    var moreErrors = validateUser( newUserAttributes );
    if (moreErrors.length) baseErrors.push.apply(baseErrors, moreErrors);

    // Return the array of errors, so your view has access to them.
    return baseErrors;
  });

Password Recipe 5: Password Hashing

By default, everyauth is agnostic about how you decide to store your users and therefore passwords. However, one should always use password hashing and salting for security.

Here's an example of how to incorporate password hashing into everyauth using bcrypt hashing. The idea is to store a salt and hash value inside your user object instead of the password. The hash value is generated from the password (sent with a registration or login request) and unique salt per user, using the bcrypt algorithm.

// Make sure to `npm install bcrypt`
var bcrypt = require('bcrypt');

everyauth.password
  .registerUser( function (newUserAttrs) {
    var promise = this.Promise()
      , password = newUserAttrs.password;

    delete newUserAttrs.password; // Don't store password
    newUserAttrs.salt = bcrypt.genSaltSync(10);
    newUserAttrs.hash = bcrypt.hashSync(password, salt);

    // Create a new user in your data store
    createUser( newUserAttrs, function (err, createdUser) {
      if (err) return promise.fail(err);
      return promise.fulfill(createdUser);
    });

    return promise;
  })
  .authenticate( function (login, password) {
    var promise
      , errors = [];
    if (!login) errors.push('Missing login.');
    if (!password) errors.push('Missing password.');
    if (errors.length) return errors;

    promise = this.Promise();

    // findUser passes an error or user to a callback after finding the
    // user by login
    findUser( login, function (err, user) {
      if (err) {
        errors.push(err.message || err);
        return promise.fulfill(errors);
      }
      if (!user) {
        errors.push('User with login ' + login + ' does not exist.');
        return promise.fulfill(errors);
      }
      bcrypt.compare(password, user.hash, function (err, didSucceed) {
        if (err) {
          return promise.fail(err);
          errors.push('Wrong password.');
          return promise.fulfill(errors);
        }
        if (didSucceed) return promise.fulfill(user);
        errors.push('Wrong password.');
        return promise.fulfill(errors);
      });
    });

    return promise;
  })

Other Modules

GitHub OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.github
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, , accessTokenExtra, githubUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.github
  .entryPath('/auth/github')
  .callbackPath('/auth/github/callback')
  .scope('repo'); // Defaults to undefined
                  // Can be set to a combination of: 'user', 'public_repo', 'repo', 'gist'
                  // For more details, see http://develop.github.com/p/oauth.html

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.github.scope(); // undefined
everyauth.github.entryPath(); // '/auth/github'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.github.configurable();

Instagram OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.instagram
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, instagramUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.instagram
  .entryPath('/auth/instagram')
  .callbackPath('/auth/instagram/callback')
  .scope('basic') // Defaults to 'basic'
                  // Can be set to a combination of: 'basic', 'comments', 'relationships', 'likes'
                  // For more details, see http://instagram.com/developer/auth/#scope
  .display(undefined); // Defaults to undefined; Set to 'touch' to see a mobile optimized version
                       // of the instagram auth page

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.instagram.callbackPath(); // '/auth/instagram/callback'
everyauth.instagram.entryPath(); // '/auth/instagram'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.instagram.configurable();

Foursquare OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.foursquare
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, foursquareUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.foursquare
  .entryPath('/auth/foursquare')
  .callbackPath('/auth/foursquare/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.foursquare.callbackPath(); // '/auth/foursquare/callback'
everyauth.foursquare.entryPath(); // '/auth/foursquare'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.foursquare.configurable();

LinkedIn OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.linkedin
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, linkedinUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.linkedin
  .entryPath('/auth/linkedin')
  .callbackPath('/auth/linkedin/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.linkedin.callbackPath(); // '/auth/linkedin/callback'
everyauth.linkedin.entryPath(); // '/auth/linkedin'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.linkedin.configurable();

Google OAuth2

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.google
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .scope('https://www.googleapis.com/auth/userinfo.profile') // What you want access to
  .handleAuthCallbackError( function (req, res) {
    // If a user denies your app, Google will redirect the user to
    // /auth/google/callback?error=access_denied
    // This configurable route handler defines how you want to respond to
    // that.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, googleUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.google
  .entryPath('/auth/google')
  .callbackPath('/auth/google/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.google.scope(); // undefined
everyauth.google.entryPath(); // '/auth/google'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.google.configurable();

Gowalla OAuth2

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.gowalla
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .handleAuthCallbackError( function (req, res) {
    // TODO - Update this documentation
    // This configurable route handler defines how you want to respond to
    // a response from Gowalla that something went wrong during the oauth2 process.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, gowallaUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.gowalla
  .entryPath('/auth/gowalla')
  .callbackPath('/auth/gowalla/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.gowalla.scope(); // undefined
everyauth.gowalla.entryPath(); // '/auth/gowalla'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.gowalla.configurable();

37signals (Basecamp, Highrise, Backpack, Campfire) OAuth2

First, register an app at integrate.37signals.com.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth['37signals']
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .handleAuthCallbackError( function (req, res) {
    // TODO - Update this documentation
    // This configurable route handler defines how you want to respond to
    // a response from 37signals that something went wrong during the oauth2 process.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, _37signalsUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth['37signals']
  .entryPath('/auth/37signals')
  .callbackPath('/auth/37signals/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth['37signals'].entryPath(); // '/auth/37signals'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth['37signals'].configurable();

AngelList OAuth2

First, register an app on AngelList.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.angellist
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR TOKEN HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, angelListUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.angellist
  .entryPath('/auth/angellist')
  .callbackPath('/auth/angellist/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.angellist.entryPath(); // '/auth/angellist'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.angellist.configurable();

Dwolla OAuth2

First, register an app on Dwolla.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.dwolla
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR TOKEN HERE')
  .scope('accountinfofull')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, dwollaUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

Skyrock OAuth

First, register an app on Skyrock.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.skyrock
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, skyrockUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

VKontakte OAuth2

First, register an app on VKontakte.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.vkontakte
  .appId('YOUR APP ID HERE')
  .appSecret('YOUR TOKEN HERE')
  .scope('photo')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, vkUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Mail.ru OAuth2

First, register an app on mail.ru.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.mailru
    .appId('YOUR CONSUMER KEY HERE')
    .appSecret('YOUR CONSUMER SECRET HERE')
    .scope('messages')
    .entryPath('/auth/mailru')
    .callbackPath('/auth/mailru/callback')
    .findOrCreateUser( function (session, accessToken, accessTokenExtra, mailruUser)  {
          // find or create user logic goes here
          // Return a user or Promise that promises a user
          // Promises are created via
          // var promise = this.Promise();
          // return promise;
    })
    .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Yahoo OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.yahoo
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, yahooUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.yahoo
  .entryPath('/auth/yahoo')
  .callbackPath('/auth/yahoo/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.yahoo.callbackPath(); // '/auth/yahoo/callback'
everyauth.yahoo.entryPath(); // '/auth/yahoo'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.yahoo.configurable();

Readability OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.readability
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, reader) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByReadabilityId[reader.username] || (usersByReadabilityId[reader.username] = reader);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.readability
  .entryPath('/auth/readability')
  .callbackPath('/auth/readability/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.readability.callbackPath(); // '/auth/readability/callback'
everyauth.readability.entryPath(); // '/auth/readability'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.readability.configurable();

Dropbox OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.dropbox
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByDropboxId[user.uid] || (usersByDropboxId[user.uid] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.dropbox
  .entryPath('/auth/dropbox')
  .callbackPath('/auth/dropbox/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.dropbox.callbackPath(); // '/auth/dropbox/callback'
everyauth.dropbox.entryPath(); // '/auth/dropbox'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.dropbox.configurable();

Justin.tv OAuth

Sign up for a Justin.tv account and activate it as a developer account to get your consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');
  
everyauth.justintv
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, justintvUser) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByJustintvId[justintvUser.id] || (usersByJustintvId[justintvUser.id] = justintvUser);
  })
  .redirectPath('/');
  
var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

The justintvUser parameter in the .findOrCreateUser() function above returns the account/whoami API call

Justin.tv API Wiki - Account/whoami

{
   "image_url_huge": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-320x240-4.jpg",
   "profile_header_border_color": null,
   "favorite_quotes": "I love Justin.tv",
   "sex": "Male",
   "image_url_large": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-125x94-4.jpg",
   "profile_about": "Check out my website:\n\nwww.justin.tv\n",
   "profile_background_color": null,
   "image_url_medium": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-75x56-4.jpg",
   "id": 1698,
   "broadcaster": true,
   "profile_url": "http:\/\/www.justin.tv\/justin\/profile",
   "profile_link_color": null,
   "image_url_small": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-50x37-4.jpg",
   "profile_header_text_color": null,
   "name": "The JUST UN",
   "image_url_tiny": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-33x25-4.jpg",
   "login": "justin",
   "profile_header_bg_color": null,
   "location": "San Francisco"
}

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.justintv
  .entryPath('/auth/justintv')
  .callbackPath('/auth/justintv/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.justintv.callbackPath(); // '/auth/justintv/callback'
everyauth.justintv.entryPath(); // '/auth/justintv'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.justintv.configurable();

Vimeo OAuth

You will first need to sign up for a developer application to get the consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.vimeo
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByVimeoId[user.id] || (usersByVimeoId[user.id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.vimeo
  .entryPath('/auth/vimeo')
  .callbackPath('/auth/vimeo/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.vimeo.callbackPath(); // '/auth/vimeo/callback'
everyauth.vimeo.entryPath(); // '/auth/vimeo'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.vimeo.configurable();

Tumblr OAuth (1.a)

You will first need to register an app to get the consumer key and secret. During registration of your new app, enter a "Default callback URL" of "http://:/auth/tumblr/callback". Once you register your app, copy down your "OAuth Consumer Key" and "Secret Key" and proceed below.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.tumblr
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByTumblrName[user.name] || (usersByTumblrName[user.name] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.tumblr
  .entryPath('/auth/tumblr')
  .callbackPath('/auth/tumblr/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.tumblr.callbackPath(); // '/auth/tumblr/callback'
everyauth.tumblr.entryPath(); // '/auth/tumblr'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.tumblr.configurable();

Evernote OAuth (1.a)

You will first need to request an API key to get the consumer key and secret. Note that this consumer key and secret will only be valid for the sandbox rather than the production OAuth host. By default the Evernote module will use the production host, so you'll need to override this using the chainable API if you're using the sandbox.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.evernote
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByEvernoteId[user.userId] || (usersByEvernoteId[user.userId] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.evernote
  .oauthHost('https://sandbox.evernote.com')
  .entryPath('/auth/evernote')
  .callbackPath('/auth/evernote/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.evernote.oauthHost(); // 'https://sandbox.evernote.com'
everyauth.evernote.callbackPath(); // '/auth/evernote/callback'
everyauth.evernote.entryPath(); // '/auth/evernote'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.evernote.configurable();

OpenStreetMap OAuth

You will first need to login to OpenStreetMap. Then register you application on your OpenStreetMap user page via the View my OAuth details link on the bottom of the page to get the consumer key and secret. The registered application does not need any permission listed there to login via OAuth.

var everyauth = require('osm')
  , connect = require('connect');

everyauth.osm
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByOSMId[user.id] || (usersByOSMId[user.id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.osm
  .oauthHost('http://api06.dev.openstreetmap.org')
  .entryPath('/auth/osm')
  .callbackPath('/auth/osm/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.osm.oauthHost(); // 'http://api.openstreetmap.org'
everyauth.osm.callbackPath(); // '/auth/osm/callback'
everyauth.osm.entryPath(); // '/auth/osm'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.osm.configurable();

TripIt OAuth (1.0)

Obtain consumer key and consumer secret for your app by registering it. Please note that TripIt is using API Key and API Secret terminology: use those values as describe below.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.tripit
  .consumerKey('YOUR API KEY')
  .consumerSecret('YOUR API SECRET')
  .findOrCreateUser( function (sess, accessToken, accessSecret, tripitProfile) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

500px OAuth (1.0)

You will first need to request an API key to get the consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth['500px']
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersBy500pxId[user.userId] || (usersBy500pxId[user.userId] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

SoundCloud OAuth2

You will first need to register an app to get the client id and secret. During registration of your new app, enter a "Default callback URL" of "http://:/auth/soundcloud/callback". Once you register your app, copy down your "Client ID" and "Client Secret" and proceed below.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.soundcloud
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .handleAuthCallbackError( function (req, res) {
    // TODO - Update this documentation
    // This configurable route handler defines how you want to respond to
    // a response from SoundCloud that something went wrong during the oauth2 process.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, soundcloudUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.soundcloud
  .entryPath('/auth/soundcloud')
  .callbackPath('/auth/soundcloud/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.soundcloud.scope(); // undefined
everyauth.soundcloud.display(); // undefined
everyauth.soundcloud.entryPath(); // '/auth/soundcloud'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.soundcloud.configurable();

mixi OAuth2

First, register an app on mixi.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.mixi
  .appId('YOUR CONSUMER KEY HERE')
  .appSecret('YOUR CONSUMER SECRET HERE')
  .display('pc') //specify device types of access: See http://developers.mixi.co.jp/
  .scope('r_profile') //specify types of access: See http://developers.mixi.co.jp/
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, mixiUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

Mailchimp OAuth2

First, register an app in Mailchimp.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.mailchimp
  .appId('YOUR CLIENT KEY HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .myHostname(process.env.HOSTNAME || "http://127.0.0.1:3000")//MC requires 127.0.0.1 for dev
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, mailchimpUserData) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
    // The mailchimpUserData object contains everything from the API method getAccountDetails and an apikey. 
    // You'll want to work with mailchimpUserData.user_id for queries
    // and mailchimpUserData.apikey for your API wrapper
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Mendeley OAuth (1.0)

You will first need to register your application to get the consumer key and secret.

everyauth.mendeley
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByMendeleyId[user.main.profile_id] || (usersByMendeleyId[user.main.profile_id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

RunKeeper OAuth (2.0)

You will first need to register your application to get the appId and appSecret.

everyauth.runkeeper
  .appId('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByRunKeeperId[user.userID] || (usersByRunKeeperId[user.userID] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

OpenID protocol

OpenID protocol allows you to use an openid auth request. You can read more information about it here http://openid.net/

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.openid
  .myHostname('http://localhost:3000')
  .simpleRegistration({
      "nickname" : true
    , "email"    : true
    , "fullname" : true
    , "dob"      : true
    , "gender"   : true
    , "postcode" : true
    , "country"  : true
    , "language" : true
    , "timezone" : true
  })
	.attributeExchange({
      "http://axschema.org/contact/email"       : "required"
    , "http://axschema.org/namePerson/friendly" : "required"
    , "http://axschema.org/namePerson"          : "required"
    , "http://axschema.org/namePerson/first"    : "required"
    , "http://axschema.org/contact/country/home": "required"
    , "http://axschema.org/media/image/default" : "required"
    , "http://axschema.org/x/media/signature"   : "required"
  })
  .openidURLField('openid_identifier'); //The POST variable used to get the OpenID
  .findOrCreateUser( function(session, openIdUserAttributes) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Google OpenID+OAuth Hybrid protocol

OpenID+OAuth Hybrid protocol allows you to combine an openid auth request with a oauth access request. You can read more information about it here http://code.google.com/apis/accounts/docs/OpenID.html

Register your domain with Google here and write down the consumer key and consumer secret generated during the domain registration.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.googlehybrid
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .scope(['GOOGLE API SCOPE','GOOGLE API SCOPE'])
  .findOrCreateUser( function(session, userAttributes) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Smarterer

You will need to register for an app id here. Implementation details follow the same pattern as with other oauth2 implementations.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.smarterer
  .appId('YOUR APP ID')
  .appSecret('YOUR APP SECRET')
  .findOrCreateUser(function(session, accessToken, accessTokenSecret, userData) {
    // find or create user logic goes here
    // userData.userName will contain the smarterer username for the authenticated user
    // userData.badges will contain the scores on quizes
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Box.net

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.box
  .apiKey('YOUR API KEY')
  .findOrCreateUser( function (sess, authToken, boxUser) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByBoxId[user.user_id] || (usersByBoxId[user.user_id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.box
  .entryPath('/auth/box')
  .callbackPath('/auth/box/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.box.callbackPath(); // '/auth/box/callback'
everyauth.box.entryPath(); // '/auth/box'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.box.configurable();

LDAP

The LDAP module is still in development. Do not use it in production yet.

Install OpenLDAP client libraries:

$ apt-get install slapd ldap-utils

Install node-ldapauth:

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.ldap
  .host('your.ldap.host')
  .port(389)

  // The `ldap` module inherits from the `password` module, so 
  // refer to the `password` module instructions several sections above
  // in this README.
  // You do not need to configure the `authenticate` step as instructed
  // by `password` because the `ldap` module already does that for you.
  // Moreover, all the registration related steps and configurable parameters
  // are no longer valid
  .getLoginPath(...)
  .postLoginPath(...)
  .loginView(...)
  .loginSuccessRedirect(...);

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Windows Azure Access Control Service (ACS)

You will need to create a Windows Azure ACS namespace. The only caveat when creating the namespace is setting the "Return URL". You will probably create one Relying Party for each environment (dev, qa, prod) and each of them will have a different "Return URL". For instance, dev will be http://localhost:port/auth/azureacs/callback and prod could be https://myapp.com/auth/azureacs/callback (notice the /auth/azureacs/callback, that's where the module will listen the POST with the token from ACS)

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.azureacs
      .identityProviderUrl('https://YOURNAMESPACE.accesscontrol.windows.net/v2/wsfederation/')
      .entryPath('/auth/azureacs')
      .callbackPath('/auth/azureacs/callback')
      .signingKey('d0jul....YOUR_SIGNINGK=_KEY......OEvz24=')
      .realm('YOUR_APPLICATION_REALM_IDENTIFIER')
      .homeRealm('') // if you want to use a default idp (like google/liveid)
      .tokenFormat('swt')  // only swt supported for now
      .findOrCreateUser( function (session, acsUser) {
         // you could enrich the "user" entity by storing/fetching the user from a db
        return null;
      });
      .redirectPath('/');


var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.box.callbackPath(); // '/auth/azureacs/callback'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.box.configurable();

Dailycred OAuth

everyauth.dailycred
  .appId(conf.dc.appId)
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, dcUserMetadata) {
    return usersByDcId[dcUserMetadata.id] ||
      (usersByDcId[dcUserMetadata.id] = addUser('dailycred', dcUserMetadata));
  })
  .redirectPath('/');

Flickr OAuth (1.0)

You will first need to request an API key to get the consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth
  .flickr
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Douban OAuth (2.0)

You will first need to Take a look at douban's developer wiki to apply a AppKey and AppSecret.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth
  .douban
  .appId('YOUR API Key')
  .appSecret('YOUR API Secret')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
  })
  .scope('email')                        // Defaults to douban_basic_common
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Configuring a Module

everyauth was built with powerful configuration needs in mind.

Every module comes with a set of parameters that you can configure directly. To see a list of those parameters on a per module basis, with descriptions about what they do, enter the following into the node REPL (to access the REPL, just type node at the command line)

> var ea = require('everyauth');
> ea.facebook.configurable();

For example, you will see that one of the configuration parameters is moduleTimeout, which is described to be how long to wait per step before timing out and invoking any timeout callbacks

Every configuration parameter corresponds to a method of the same name on the auth module under consideration (i.e., in this case ea.facebook). To create or over-write that parameter, just call that method with the new value as the argument:

ea.facebook
  .moduleTimeout( 4000 ); // Wait 4 seconds before timing out any step
                          // involved in the facebook auth process

Configuration parameters can be scalars. But they can be anything. For example, they can also be functions, too. The facebook module has a configurable step named findOrCreateUser that is described as "STEP FN [findOrCreateUser] function encapsulating the logic for the step fetchOAuthUser.". What this means is that this configures the function (i.e., "FN") that encapsulates the logic of this step.

ea.facebook
  .findOrCreateUser( function (session, accessToken, extra, oauthUser) {
    // find or create user logic goes here
  });

How do we know what arguments the function takes? We elaborate more about step function configuration in our Introspection section below.

For coffee-script lovers

Everyauth also supports a special method configure for coffee-script aficionados. Coffee and chainable APIs often don't mix well. As an alternative, you can configure an everyauth module using an Object passed to configure:

everyauth.dropbox.configure
  consumerKey:       conf.dropbox.consumerKey
  consumerSecret:    conf.dropbox.consumerSecret
  findOrCreateUser:  (sess, accessToken, accessSecret, dbMeta) -> users[dbMeta.uid] or= addUser('dropbox', dbMeta)
  redirectPath:      '/'

Introspection

everyauth provides convenient methods and getters for finding out about any module.

Show all configurable parameters with their descriptions:

everyauth.facebook.configurable();

Show the value of a single configurable parameter:

// Get the value of the configurable callbackPath parameter
everyauth.facebook.callbackPath(); // => '/auth/facebook/callback'

Show the declared routes (pretty printed):

everyauth.facebook.routes;

Show the steps initiated by a given route:

everyauth.facebook.route.get.entryPath.steps; 
everyauth.facebook.route.get.callbackPath.steps;

Sometimes you need to set up additional steps for a given auth module, by defining that step in your app. For example, the set of steps triggered when someone requests the facebook module's callbackPath contains a step that you must define in your app. To see what that step is, you can introspect the callbackPath route with the facebook module.

everyauth.facebook.route.get.callbackPath.steps.incomplete;
// => [ { name: 'findOrCreateUser',
//        error: 'is missing: its function' } ]

This tells you that you must define the function that defines the logic for the findOrCreateUser step. To see what the function signature looks like for this step:

var matchingStep =
everyauth.facebook.route.get.callbackPath.steps.filter( function (step) {
  return step.name === 'findOrCreateUser';
})[0];
// { name: 'findOrCreateUser',
//   accepts: [ 'session', 'accessToken', 'extra', 'oauthUser' ],
//   promises: [ 'user' ] }

This tells you that the function should take the following 4 arguments:

function (session, accessToken, extra, oauthUser) {
  ...
}

And that the function should return a user that is a user object or a Promise that promises a user object.

// For synchronous lookup situations, you can return a user
function (session, accessToken, extra, oauthUser) {
  ...
  return { id: 'some user id', username: 'some user name' };
}

// OR

// For asynchronous lookup situations, you must return a Promise that
// will be fulfilled with a user later on
function (session, accessToken, extra, oauthUser) {
  var promise = this.Promise();
  asyncFindUser( function (err, user) {
    if (err) return promise.fail(err);
    promise.fulfill(user);
  });
  return promise;
}

You add this function as the block for the step findOrCreateUser just like you configure any other configurable parameter in your auth module:

everyauth.facebook
  .findOrCreateUser( function (session, accessToken, extra, oauthUser) {
    // Logic goes here
  });

There are also several other introspection tools at your disposal:

For example, to show the submodules of an auth module by name:

everyauth.oauth2.submodules;

Other introspection tools to describe (explanations coming soon):

Invalid Steps

everyauth.facebook.routes.get.callbackPath.steps.invalid

Debugging

Debugging - Logging Module Steps

To turn on debugging:

everyauth.debug = true;

Each everyauth auth strategy module is composed of steps. As each step begins and ends, everyauth will print out to the console the beginning and end of each step. So by turning on the debug flag, you get insight into what step everyauth is executing at any time.

For example, here is some example debugging information output to the console during a Facebook Connect authorization:

starting step - getAuthUri
...finished step
starting step - requestAuthUri
...finished step
starting step - getCode
...finished step
starting step - getAccessToken
...finished step
starting step - fetchOAuthUser
...finished step
starting step - getSession
...finished step
starting step - findOrCreateUser
...finished step
starting step - compile
...finished step
starting step - addToSession
...finished step
starting step - sendResponse
...finished step

Debugging - Configuring Error Handling

By default, all modules handle errors by throwing them. That said, everyauth allows you to over-ride this behavior.

You can configure error handling at the module and step level. To handle all errors in the same manner across all auth modules that you use, do the following.

everyauth.everymodule.moduleErrback( function (err) {
  // Do something with the err -- e.g., log it, throw it
});

You can also configure your error handling on a per module basis. So, for example, if you want to handle errors during the Facebook module differently than in other modules:

everyauth.facebook.moduleErrback( function (err) {
  // Do something with the err -- e.g., log it, throw it
});

Debugging - Setting Timeouts

By default, every module has 10 seconds to complete each step. If a step takes longer than 10 seconds to complete, then everyauth will pass a timeout error to your configured error handler (see section "Configure Error Handling" above).

If you would like to increase or decrease the timeout period across all modules, you can do so via:

everyauth.everymodule.moduleTimeout(2000); // Wait 2 seconds per step instead before timing out

You can eliminate the timeout altogether by configuring your timeouts to -1:

everyauth.everymodule.moduleTimeout(-1);

You can also configure the timeout period on a per module basis. For example, the following will result in the facebook module having 3 seconds to complete each step before timing out; all other modules will have the default 10 seconds per step before timing out.

everyauth.facebook.moduleTimeout(3000); // Wait 3 seconds

In the Wild

The following projects use everyauth.

If you are using everyauth in a project, app, or module, get on the list below by getting in touch or submitting a pull request with changes to the README.

Startups & Apps

Modules

mongoose-auth Authorization plugin for use with the node.js MongoDB orm.
Heroku's Facebook Node.JS Template
node-express-boilerplate
ExpressStarter

Tutorials

The following are 3rd party screencasts and blog posts about either getting up and running with everyauth or writing your own everyauth modules to support a new service.

If you would like your blog post to be included, please submit a pull request with changes to the README.

Author

Brian Noguchi

Credits

Thanks to the following contributors for the following modules:

RocketLabs Development for contributing
- OpenId
- Google Hybrid
Andrew Mee
- OpenId
Alfred Nerstu
- Readability
Torgeir
- DropBox
slickplaid
- Justin.tv
- Vimeo
Andrew Kramolisch
- Gowalla
Kenan Shifflett
- Dwolla
Alexey Simonenko
- VKontakte
Alexey Gordeyev
- Mail.ru
Rodolphe Stoclin
- Skyrock
Danny Amey
- 500px
- Evernote
Chris Leishman
- SoundCloud

MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Name		Name	Last commit message	Last commit date
Latest commit History 720 Commits
example		example
lib		lib
media		media
test		test
.gitignore		.gitignore
Makefile		Makefile
README.md		README.md
documentup.json		documentup.json
index.js		index.js
package.json		package.json

EgorP/everyauth

Folders and files

Latest commit

History

Repository files navigation

everyauth

Installation

Quick Start

Example Application

Tests

Accessing the User

Express Helpers

Logging Out

Custom redirect on password-based login or registration

Auth Strategy Instructions

Facebook Connect

Dynamic Facebook Connect Scope

Facebook Mobile OAuth Dialog

Facebook Canvas Pages

Twitter OAuth

Password Authentication

Password Recipe 1: Extra registration data

Password Recipe 2: Logging in with email or phone number

Password Recipe 3: Adding additional view local variables to login and registration views

Password Recipe 4: Customize Your Registration Validation

Password Recipe 5: Password Hashing

Other Modules

GitHub OAuth

Instagram OAuth

Foursquare OAuth

LinkedIn OAuth

Google OAuth2

Gowalla OAuth2

37signals (Basecamp, Highrise, Backpack, Campfire) OAuth2

AngelList OAuth2

Dwolla OAuth2

Skyrock OAuth

VKontakte OAuth2

Mail.ru OAuth2

Yahoo OAuth

Readability OAuth

Dropbox OAuth

Justin.tv OAuth

Vimeo OAuth

Tumblr OAuth (1.a)

Evernote OAuth (1.a)

OpenStreetMap OAuth

TripIt OAuth (1.0)

500px OAuth (1.0)

SoundCloud OAuth2

mixi OAuth2

Mailchimp OAuth2

Mendeley OAuth (1.0)

RunKeeper OAuth (2.0)

OpenID protocol

Google OpenID+OAuth Hybrid protocol

Smarterer

Box.net

LDAP

Windows Azure Access Control Service (ACS)

Dailycred OAuth

Flickr OAuth (1.0)

Douban OAuth (2.0)

Configuring a Module

For coffee-script lovers

Introspection

Debugging

Debugging - Logging Module Steps

Debugging - Configuring Error Handling

Debugging - Setting Timeouts

In the Wild

Startups & Apps

Modules

Tutorials

Author

Credits

MIT License

About

Resources

Stars

Packages