Skip to content

EllenLouiseRipley/Sensirion_SHT35

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Sensirion_SHT35

Read-out of the Sensirion SHT3x digital Temperature sensor by use of the I2C port on a Raspberry PI model 3B+. More info on the SHT3x and the I2C port.

Raspberry PI - I2C port

First the hardware needs to be enabled before the software, attached python scripts, can be used. This is done by following the steps of the link above. The I2C port is not enabled by default, this needs to be done;

  1. Run, in terminal, sudo raspi-config.
  2. Select point 9, Advanced options.
  3. Select A7, I2C, and select yes.
  4. Exit this window and reboot the PI.

After reboot, check if the I2C port is enabled by using;

ls /dev/*i2c*

if I2C port is open the PI will respond with;

/dev/i2c-1

where 1 indicates which I2C bus is used.

Now the I2C port is enabled but to have interaction between the PI and the sensor some utilities are needed. Use the following command line in a terminal;

sudo apt-get install -y i2c-tools

The i2cdetect command probes all the addresses on a I2C port bus, and report whether any devices are present. Outcome of this command, with the MS5837 sensor, will look like;

pi@raspberrypi:~/$ i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Here the I2C adress of the sensor is 0x44. More information, or source, can be found here.

I2C - Python

To read out the sensors with python, some python modules are needed. Run the command lines below;

sudo apt-get update
sudo apt-get install python-smbus
sudo apt-get install python-obspy

Python scripts - simple one shot data

The simple script includes a one-shot data request.

Python scripts - src folder

The main file to read raw sensor data of the SHT3x is the sht3x_main.py script. This script includes all fuctions/defenitions needed to comunicate with the sensor. sht3x.py calls the main script and loops with a specific sampling rate.

When starting sht3x.py, one can ask for the help function (-h). This function shows the arguments one can give, with the script. Those arguments are:

-t            - Time of recording
-fs           - Sample rate

Author

Olivier den Ouden - KNMI - HFSP SeabirdSound

About

Raspberry Pi - Sensirion SHT35 Olivier den Ouden

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%