領式(Kaname-Shiki)

Kaname-Shiki is a lightweight and fast memory allocator.

It has the following features.

• Fast allocation and free of any size
• Highly efficient parallel operation with RevolverAtomic
• Fast Cache mechanism (own thread FreeList and other thread FreeList)
  • At the time of own thread FreeList operation, no atomic operation, no CAS operation (Lock-Free & Wait-Free)
  • Use RevolverAtomic when working with other thread FreeList (Lock-Free, !Wait-Free)
  • Use own-threaded FreeList preferentially
• Fast Reserver mechanism (local FreeList and global FreeList)
  • When operating with local FreeList, no atomic operation, no CAS operation (Lock-Free & Wait-Free)
  • Use RevolverAtomic when working with Global FreeList (Lock-Free, !Wait-Free)
  • Use a preferred local FreeList
• When working with Global Heap, normal Mutex (!Lock-Free, !Wait-Free)
• Retry when memory is low
• Utilization of highly efficient memory
• Utilization of highly efficient HardwareCache
• Thread scalable
• Lightweight source code (total 49KB, 2600 lines)

Benchmark

The verified environment is as follows.

• Windows 10 Pro 64bit
• Core i7-8700 3.20GHz
• Memory 32GiB

multi-thread

This is the cumulative total of nine tests from testA to testI.
The unit is seconds. The lower the number, the faster.

• testA to testE : Simple test
• testF to testI : Tests assuming more practical multi-thread programming
• See the Benchmark directory for details on each test

Allocation and Free only

** ! Note ! ** : Mimalloc does not account for the Free load because the allocation failure occurred 230,000 times in the “2MiB to 32MiB” test.

Allocation and Free with memory filling (HardwareCache efficiency)

** ! Note ! ** : Mimalloc does not account for the memory fill and Free load due to 230,000 allocation failures in the "2MiB to 32MiB" test.

single-thread

This is the cumulative total of five types of tests from testA to testE.
The unit is seconds. The lower the number, the faster.

• testA to testE : Simple test
• See the Benchmark directory for details on each test

Allocation and Free only

Allocation and Free with memory filling (HardwareCache efficiency)

Kaname-Shiki has high hardware cache efficiency, so even if it is greatly inferior in "Allocation and Free only", the difference is small when actually reading and writing memory, and it has sufficient high speed performance.

Construction

Explanation

Factors for speeding up

Speed ​​up is achieved by avoiding, overcoming, or mitigating the following problems.

• atomic fighting problem
  • When access concentrates on one atomic variable, processing speed decreases.
• lock conflict problem
  • When CAS operations are concentrated on one atomic variable, the processing speed is significantly reduced.
• Thread execution right transfer problem
  • Thread rescheduling by the OS slows down processing speed

RevolverAtomic mechanism

Allocation Revolver and Free Revolver

• Allocation Revolver rotates a dedicated Atomic index on every request
• Free Revolver rotates a dedicated Atomic index on every request
• Distribute access between allocated and freed Atomic indexes (reduces atomic fighting problems)
• In the simultaneous request for allocation and the simultaneous request for free, atomic operations are distributedly accessed (reducing lock conflict problems)
• Do not transfer thread execution right

Cache mechanism

Own thread FreeList and other threads FreeList

• Keep allocatable space
• The own thread FreeList is guaranteed to be accessed by its own thread (no atomic operation, no CAS operation)
• Other thread FreeList is accessed simultaneously from multiple threads (RevolverAtomic)
• FreeList is distributedly accessed by its own thread and other threads (improved parallel operation efficiency)
• Do not transfer thread execution right

Allocation

• When an allocation request comes, the area is taken out from its own thread FreeList and returned to the application
• If the own thread FreeList is empty, allocation is performed from the other thread FreeList (RevolverAtomic)
• If other thread FreeList is empty, entrust processing to the allocator that has the Cache mechanism

Free

• Free performed in its own thread holds the area in its own thread FreeList
• Free performed in another thread holds the area in its other thread FreeList (RevolverAtomic)

Reserver mechanism

Local FreeList and Global FreeList

• Keep allocatable space
• Local FreeList is guaranteed to be accessed by its own thread (no atomic operation, no CAS operation)
• Global FreeList is accessed from multiple threads simultaneously (RevolverAtomic)
• FreeList is distributedly accessed by its own thread and other threads (improved parallel operation efficiency)
• Do not transfer thread execution right

Allocation

• When an allocation request comes, it takes the area from the local FreeList and returns it to the application
• If the local FreeList is empty, allocate from the global FreeList (RevolverAtomic)
• If global FreeList is empty, assign from GlobalHeap (normal mutex)
• If allocation from GlobalHeap fails, allocation is performed from the OS (exclusive control is left to the OS)
• If allocation from the OS fails, free the space held in the local FreeList and global FreeList and retry the allocation

Free

• Free performed by the own thread retains space in the local FreeList
• Free performed in another thread holds the area in its global FreeList

LocalPool

Fixed size pool allocator

• Has a Cache mechanism
• Allocates a multiple of std::size_t
• In the initial state, all areas are stored in the own thread FreeList in advance.
• If FreeList is empty, create a new LocalPool and assign it
• When the area is full or the thread is destroyed, it moves to the Clearance state
• In the Clearance state, when all areas are freed, destroy itself

LocalCram

Flexible sized allocator

• Has a Cache mechanism
• Allocates a "2 to the power of N ≤ size <2 to the power of (N+1)"
• In the initial state, the own thread FreeList and the other thread FreeList are empty
• If FreeList is empty, allocate space and return to application if requested size is available
• If there is no free space for the requested size, a new LocalCram is created and allocated
• If there is no space in the area or if the thread is destroyed, it moves to the Clearance state
• In the Clearance state, when all areas are freed, destroy itself

LocalAny

Any size allocator

• Always create and assign a new LocalAny
• Destroys itself when space is freed

LocalReserver

Handles allocation (generation) and free(destroy) of LocalPool, LocalCram, and LocalAny that are performed in the local thread.

• Has a local FreeList

GlobalReserver

Handles allocation and free requests from LocalReserver, and free(destroy) of LocalPool, LocalCram, and LocalAny made by other threads.

• Has a global FreeList

GlobalHeap

Any size allocator

Handles allocation and free requests from GlobalReserver.

• Node-based assignment using a bidirectional list
• When freeing, if adjacent nodes have been freed, merge

Features of cooperative(協調型) and specialized types(特化型)

Cooperative(協調型)

This type is suitable for general-purpose OS applications.

• Secure small GlobalHeap size
• Flexible memory with other running applications
• SystemAlloc and SystemFree are increasing in number and tend to be slow

Specialized type(特化型)

This type is suitable for embedded applications (such as game consoles).

• Ensure large GlobalHeap size
• Occupies memory without considering other running applications
• The number of SystemAlloc and SystemFree decreases, and it tends to be faster

Build

Windows

Msvc

./build_m.bat

Linux

g++

bash ./build_g.sh

clang++

bash ./build_c.sh

Test

Common additional compilation options

-DSINGLE=0～1
0 or undefined : multi-thread test
1 : single-thread test

-DCATEGORY=0～4
0 or undefined : 0B～32MiB
1 : 0B～1KiB
2 : 2KiB～32KiB
3 : 32KiB～1MiB
4 : 2MiB～32MiB

-DFILL=0～1
0 or undefined : NOP
1 : Memory Fill & Strick Check

Windows

Msvc

Kaname-Shiki（特化型）

cl -DNDEBUG -DKANAMESHIKI Main.cpp CLog.cpp -Ox -EHsc -Fe:KanameShiki1.exe KanameShiki1.lib
KanameShiki1.exe

Kaname-Shiki（協調型）

cl -DNDEBUG -DKANAMESHIKI Main.cpp CLog.cpp -Ox -EHsc -Fe:KanameShiki0.exe KanameShiki0.lib
KanameShiki0.exe

malloc

cl -DNDEBUG Main.cpp CLog.cpp -Ox -EHsc -Fe:Malloc.exe
Malloc.exe

For those who can create their own environment

mimalloc（Because it depends on the built environment, if you try to link mimalloc.lib built in another environment, a link error may occur）

cl -DNDEBUG -DMIMALLOC Main.cpp CLog.cpp -Ox -EHsc -Fe:MiMalloc.exe mimalloc.lib advapi32.lib -MD -link -LTCG
MiMalloc.exe

tcmalloc

cl -DNDEBUG -DTCMALLOC Main.cpp CLog.cpp -Ox -EHsc -Fe:TcMalloc.exe libtcmalloc_minimal.lib
TcMalloc.exe

jemalloc（Segmentation fault occurs frequently, but it works when repeated several times. It is unknown whether it is operating normally）

cl -DNDEBUG -DJEMALLOC Main.cpp CLog.cpp -Ox -EHsc -Fe:JeMalloc.exe jemalloc.lib -I"jemalloc/include/msvc_compat"
JeMalloc.exe

Linux

g++

Preparation

g++ -DNDEBUG Main.cpp CLog.cpp -O3 -lpthread -latomic -o Malloc_g.exe

Kaname-Shiki（特化型）

LD_PRELOAD=./KanameShiki1_g.so ./Malloc_g.exe

Kaname-Shiki（協調型）

LD_PRELOAD=./KanameShiki0_g.so ./Malloc_g.exe

malloc

./Malloc_g.exe

clang++

Preparation

clang++ -DNDEBUG Main.cpp CLog.cpp -std=c++14 -O3 -lpthread -latomic -o Malloc_c.exe

Kaname-Shiki（特化型）

LD_PRELOAD=./KanameShiki1_c.so ./Malloc_c.exe

Kaname-Shiki（協調型）

LD_PRELOAD=./KanameShiki0_c.so ./Malloc_c.exe

malloc

./Malloc_c.exe

Finally

How was it?

Unfortunately, Mingw64 g++ and clang++ have been confirmed not to work.
Mingw64 g++ cannot be terminated normally due to abnormal thread destruction timing.
Mingw64 clang++ doesn't compile because thread_local only supports POD type.

---

If you are interested in a fast comparative stable sorting algorithm, see [颯式（Hayate-Shiki）] (https://github.com/EmuraDaisuke/SortingAlgorithm.HayateShiki).