ARM: imx_v6_v7_defconfig: Select the coda driver as module #13

gibsson · 2017-08-23T12:56:05Z

The coda driver may be probed prior to the rootfs being available, leading
to firmware loading failure.

To avoid such problem, select the coda driver as module.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com

The coda driver may be probed prior to the rootfs being available, leading to firmware loading failure. To avoid such problem, select the coda driver as module. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

commit 4dfce57 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] Freescale#9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] Freescale#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] Freescale#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] Freescale#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] Freescale#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] Freescale#14 [ffff8800a57bbe00] evict at ffffffff811e1b67 Freescale#15 [ffff8800a57bbe28] iput at ffffffff811e23a5 Freescale#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 Freescale#17 [ffff8800a57bbe88] dput at ffffffff811dd06c Freescale#18 [ffff8800a57bbea8] __fput at ffffffff811c823b Freescale#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e Freescale#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 Freescale#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c Freescale#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. [nborisov: backported to 4.4] Cc: stable@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- fs/xfs/xfs_bmap_util.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

commit 0beb201 upstream. Holding the reconfig_mutex over a potential userspace fault sets up a lockdep dependency chain between filesystem-DAX and the libnvdimm ioctl path. Move the user access outside of the lock. [ INFO: possible circular locking dependency detected ] 4.11.0-rc3+ Freescale#13 Tainted: G W O ------------------------------------------------------- fallocate/16656 is trying to acquire lock: (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffa00080b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm] but task is already holding lock: (jbd2_handle){++++..}, at: [<ffffffff813b4944>] start_this_handle+0x104/0x460 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> Freescale#2 (jbd2_handle){++++..}: lock_acquire+0xbd/0x200 start_this_handle+0x16a/0x460 jbd2__journal_start+0xe9/0x2d0 __ext4_journal_start_sb+0x89/0x1c0 ext4_dirty_inode+0x32/0x70 __mark_inode_dirty+0x235/0x670 generic_update_time+0x87/0xd0 touch_atime+0xa9/0xd0 ext4_file_mmap+0x90/0xb0 mmap_region+0x370/0x5b0 do_mmap+0x415/0x4f0 vm_mmap_pgoff+0xd7/0x120 SyS_mmap_pgoff+0x1c5/0x290 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> Freescale#1 (&mm->mmap_sem){++++++}: lock_acquire+0xbd/0x200 __might_fault+0x70/0xa0 __nd_ioctl+0x683/0x720 [libnvdimm] nvdimm_ioctl+0x8b/0xe0 [libnvdimm] do_vfs_ioctl+0xa8/0x740 SyS_ioctl+0x79/0x90 do_syscall_64+0x6c/0x200 return_from_SYSCALL_64+0x0/0x7a -> #0 (&nvdimm_bus->reconfig_mutex){+.+.+.}: __lock_acquire+0x16b6/0x1730 lock_acquire+0xbd/0x200 __mutex_lock+0x88/0x9b0 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_forget_poison+0x25/0x50 [libnvdimm] nvdimm_clear_poison+0x106/0x140 [libnvdimm] pmem_do_bvec+0x1c2/0x2b0 [nd_pmem] pmem_make_request+0xf9/0x270 [nd_pmem] generic_make_request+0x118/0x3b0 submit_bio+0x75/0x150 Fixes: 62232e4 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23edca8 upstream. There is a problem if we are going to unmap a rbd device and the watch_dwork is going to queue delayed work for watch: unmap Thread watch Thread timer do_rbd_remove cancel_tasks_sync(rbd_dev) queue_delayed_work for watch destroy_workqueue(rbd_dev->task_wq) drain_workqueue(wq) destroy other resources in wq call_timer_fn __queue_work() Then the delayed work escape the cancel_tasks_sync() and destroy_workqueue() and we will get an user-after-free call trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ #13 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__queue_work+0x6a/0x3b0 RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086 RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000 RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00 R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970 R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0 Call Trace: <IRQ> ? __queue_work+0x3b0/0x3b0 call_timer_fn+0x2d/0x130 run_timer_softirq+0x16e/0x430 ? tick_sched_timer+0x37/0x70 __do_softirq+0xd2/0x280 irq_exit+0xd5/0xe0 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 [ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch() either bails out early because the watch is UNREGISTERED at that point or just gets cancelled. ] Cc: stable@vger.kernel.org Fixes: 99d1694 ("rbd: retry watch re-registration periodically") Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7030342 upstream. The syzkaller detected a out-of-bounds issue with the events filter code, specifically here: prog[N].pred = NULL; /* #13 */ prog[N].target = 1; /* TRUE */ prog[N+1].pred = NULL; prog[N+1].target = 0; /* FALSE */ -> prog[N-1].target = N; prog[N-1].when_to_branch = false; As that's the first reference to a "N-1" index, it appears that the code got here with N = 0, which means the filter parser found no filter to parse (which shouldn't ever happen, but apparently it did). Add a new error to the parsing code that will check to make sure that N is not zero before going into this part of the code. If N = 0, then -EINVAL is returned, and a error message is added to the filter. Cc: stable@vger.kernel.org Fixes: 8076559 ("tracing: Rewrite filter logic to be simpler and faster") Reported-by: air icy <icytxw@gmail.com> bugzilla url: https://bugzilla.kernel.org/show_bug.cgi?id=200019 Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23edca8 upstream. There is a problem if we are going to unmap a rbd device and the watch_dwork is going to queue delayed work for watch: unmap Thread watch Thread timer do_rbd_remove cancel_tasks_sync(rbd_dev) queue_delayed_work for watch destroy_workqueue(rbd_dev->task_wq) drain_workqueue(wq) destroy other resources in wq call_timer_fn __queue_work() Then the delayed work escape the cancel_tasks_sync() and destroy_workqueue() and we will get an user-after-free call trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ Freescale#13 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__queue_work+0x6a/0x3b0 RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086 RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000 RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00 R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970 R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0 Call Trace: <IRQ> ? __queue_work+0x3b0/0x3b0 call_timer_fn+0x2d/0x130 run_timer_softirq+0x16e/0x430 ? tick_sched_timer+0x37/0x70 __do_softirq+0xd2/0x280 irq_exit+0xd5/0xe0 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 [ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch() either bails out early because the watch is UNREGISTERED at that point or just gets cancelled. ] Cc: stable@vger.kernel.org Fixes: 99d1694 ("rbd: retry watch re-registration periodically") Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ecd6053 ] Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5e ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea01d5 Freescale#13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> CC: Matthew Wilcox <willy@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 401c636 ] When we get a hung task it can often be valuable to see _all_ the hung tasks on the system before calling panic(). Quoting from https://syzkaller.appspot.com/text?tag=CrashReport&id=5316056503549952 ---------------------------------------- INFO: task syz-executor0:6540 blocked for more than 120 seconds. Not tainted 4.16.0+ #13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor0 D23560 6540 4521 0x80000004 Call Trace: context_switch kernel/sched/core.c:2848 [inline] __schedule+0x8fb/0x1ef0 kernel/sched/core.c:3490 schedule+0xf5/0x430 kernel/sched/core.c:3549 schedule_preempt_disabled+0x10/0x20 kernel/sched/core.c:3607 __mutex_lock_common kernel/locking/mutex.c:833 [inline] __mutex_lock+0xb7f/0x1810 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0x1759/0x1e00 block/ioctl.c:601 ioctl_by_bdev+0xa5/0x110 fs/block_dev.c:2060 isofs_get_last_session fs/isofs/inode.c:567 [inline] isofs_fill_super+0x2ba9/0x3bc0 fs/isofs/inode.c:660 mount_bdev+0x2b7/0x370 fs/super.c:1119 isofs_mount+0x34/0x40 fs/isofs/inode.c:1560 mount_fs+0x66/0x2d0 fs/super.c:1222 vfs_kern_mount.part.26+0xc6/0x4a0 fs/namespace.c:1037 vfs_kern_mount fs/namespace.c:2514 [inline] do_new_mount fs/namespace.c:2517 [inline] do_mount+0xea4/0x2b90 fs/namespace.c:2847 ksys_mount+0xab/0x120 fs/namespace.c:3063 SYSC_mount fs/namespace.c:3077 [inline] SyS_mount+0x39/0x50 fs/namespace.c:3074 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 (...snipped...) Showing all locks held in the system: (...snipped...) 2 locks held by syz-executor0/6540: #0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: alloc_super fs/super.c:211 [inline] #0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: sget_userns+0x3b2/0xe60 fs/super.c:502 /* down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); */ #1: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */ (...snipped...) 3 locks held by syz-executor7/6541: #0: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */ #1: 000000007bf3d3f9 (&bdev->bd_mutex){+.+.}, at: blkdev_reread_part+0x1e/0x40 block/ioctl.c:192 #2: 00000000566d4c39 (&type->s_umount_key#50){.+.+}, at: __get_super.part.10+0x1d3/0x280 fs/super.c:663 /* down_read(&sb->s_umount); */ ---------------------------------------- When reporting an AB-BA deadlock like shown above, it would be nice if trace of PID=6541 is printed as well as trace of PID=6540 before calling panic(). Showing hung tasks up to /proc/sys/kernel/hung_task_warnings could delay calling panic() but normally there should not be so many hung tasks. Link: http://lkml.kernel.org/r/201804050705.BHE57833.HVFOFtSOMQJFOL@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ecd6053 ] Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5e ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea01d5 #13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> CC: Matthew Wilcox <willy@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 Freescale#1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 Freescale#2 [ffff88085c6db830] oops_end at ffffffff81008ae7 Freescale#3 [ffff88085c6db860] no_context at ffffffff81050b8f Freescale#4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 Freescale#5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 Freescale#6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e Freescale#7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c Freescale#8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Freescale#9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 Freescale#10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c Freescale#11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b Freescale#12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 Freescale#13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b Freescale#14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a Freescale#15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 Freescale#16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 Freescale#17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a Freescale#18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 Freescale#19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d Freescale#20 [ffff88085c6dbeb0] kthread at ffffffff81096384 Freescale#21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6cc4a08 upstream. info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 Freescale#1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed Freescale#2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 Freescale#3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e Freescale#4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] Freescale#5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] Freescale#6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] Freescale#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] Freescale#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 Freescale#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] Freescale#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 Freescale#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa Freescale#12 [ffff881ff43eff18] sys_read at ffffffff811fda62 Freescale#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 6cc4a08 upstream. info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - Freescale#8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... Freescale#9 blkif_free at ffffffffa0149aaa [xen_blkfront] Freescale#10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] Freescale#11 blkback_changed at ffffffffa014ea8b [xen_blkfront] Freescale#12 xenbus_otherend_changed at ffffffff81424670 Freescale#13 backend_changed at ffffffff81426dc3 Freescale#14 xenwatch_thread at ffffffff81422f29 Freescale#15 kthread at ffffffff810abe6a Freescale#16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 Freescale#1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed Freescale#2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 Freescale#3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e Freescale#4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] Freescale#5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] Freescale#6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] Freescale#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] Freescale#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 Freescale#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] Freescale#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 Freescale#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa Freescale#12 [ffff881ff43eff18] sys_read at ffffffff811fda62 Freescale#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 919ab25 upstream. The musb driver calls into this phy driver to disable/enable squelch detection. This function was introduced in 24fe86a ("phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect"). This function in turn calls sun4i_usb_phy_write, which uses a mutex to guard the common access register. Unfortunately musb does this in atomic context, which results in the following warning with lock debugging enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97 in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: kworker/0:2 CPU: 0 PID: 96 Comm: kworker/0:2 Not tainted 4.8.0-rc4-00181-gd502f8ad1c3e Freescale#13 Hardware name: Allwinner sun8i Family Workqueue: events musb_deassert_reset [<c010bc01>] (unwind_backtrace) from [<c0109237>] (show_stack+0xb/0xc) [<c0109237>] (show_stack) from [<c02a669b>] (dump_stack+0x67/0x74) [<c02a669b>] (dump_stack) from [<c05d68c9>] (mutex_lock+0x15/0x2c) [<c05d68c9>] (mutex_lock) from [<c02c3589>] (sun4i_usb_phy_write+0x39/0xec) [<c02c3589>] (sun4i_usb_phy_write) from [<c03e6327>] (musb_port_reset+0xfb/0x184) [<c03e6327>] (musb_port_reset) from [<c03e4917>] (musb_deassert_reset+0x1f/0x2c) [<c03e4917>] (musb_deassert_reset) from [<c012ecb5>] (process_one_work+0x129/0x2b8) [<c012ecb5>] (process_one_work) from [<c012f5e3>] (worker_thread+0xf3/0x424) [<c012f5e3>] (worker_thread) from [<c0132dbd>] (kthread+0xa1/0xb8) [<c0132dbd>] (kthread) from [<c0105f31>] (ret_from_fork+0x11/0x20) Since the register access is mmio, we can use a spinlock to guard this specific access, rather than the mutex that guards the entire phy. Fixes: ba4bdc9 ("PHY: sunxi: Add driver for sunxi usb phy") Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b6bc1c7 upstream. Function ib_create_qp() was failing to return an error when rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp() when trying to dereferece the qp pointer which was actually a negative errno. The crash: crash> log|grep BUG [ 136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 crash> bt PID: 3736 TASK: ffff8808543215c0 CPU: 2 COMMAND: "kworker/u64:2" #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0 Freescale#1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758 Freescale#2 [ffff88084d323480] crash_kexec at ffffffff8111682d Freescale#3 [ffff88084d3234b0] oops_end at ffffffff81032bd6 Freescale#4 [ffff88084d3234e0] no_context at ffffffff8106e431 Freescale#5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610 Freescale#6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4 Freescale#7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc Freescale#8 [ffff88084d323620] do_page_fault at ffffffff8106f057 Freescale#9 [ffff88084d323660] page_fault at ffffffff816e3148 [exception RIP: ib_create_qp+427] RIP: ffffffffa02554fb RSP: ffff88084d323718 RFLAGS: 00010246 RAX: 0000000000000004 RBX: fffffffffffffff4 RCX: 000000018020001f RDX: ffff880830997fc0 RSI: 0000000000000001 RDI: ffff88085f407200 RBP: ffff88084d323778 R8: 0000000000000001 R9: ffffea0020bae210 R10: ffffea0020bae218 R11: 0000000000000001 R12: ffff88084d3237c8 R13: 00000000fffffff4 R14: ffff880859fa5000 R15: ffff88082eb89800 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Freescale#10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm] Freescale#11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma] Freescale#12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma] Freescale#13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma] Freescale#14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma] Freescale#15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm] Freescale#16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm] Freescale#17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm] Freescale#18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm] Freescale#19 [ffff88084d323cb0] process_one_work at ffffffff810a1483 Freescale#20 [ffff88084d323d90] worker_thread at ffffffff810a211d Freescale#21 [ffff88084d323ec0] kthread at ffffffff810a6c5c Freescale#22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36eb8ff upstream. Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 Freescale#1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 Freescale#2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c Freescale#3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a Freescale#4 [ffff891ee00039e0] no_context at ffffffffbd074643 Freescale#5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e Freescale#6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 Freescale#7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a Freescale#8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 Freescale#9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Freescale#10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] Freescale#11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] Freescale#12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] Freescale#13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] Freescale#14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 Freescale#15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 Freescale#16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 Freescale#17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 Freescale#18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 Freescale#19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- Freescale#20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame Freescale#21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd Freescale#22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 Freescale#23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 Freescale#24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 Freescale#25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 Freescale#26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa Freescale#27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca Freescale#28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 Freescale#29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb Freescale#30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…stamp commit e2c2206 upstream. BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/2809 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 2 PID: 2809 Comm: qemu-system-x86 Not tainted 4.11.0+ Freescale#13 Call Trace: dump_stack+0x99/0xce check_preemption_disabled+0xf5/0x100 __this_cpu_preempt_check+0x13/0x20 get_kvmclock_ns+0x6f/0x110 [kvm] get_time_ref_counter+0x5d/0x80 [kvm] kvm_hv_process_stimers+0x2a1/0x8a0 [kvm] ? kvm_hv_process_stimers+0x2a1/0x8a0 [kvm] ? kvm_arch_vcpu_ioctl_run+0xac9/0x1ce0 [kvm] kvm_arch_vcpu_ioctl_run+0x5bf/0x1ce0 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 RIP: 0033:0x7f9d164ed357 ? __this_cpu_preempt_check+0x13/0x20 This can be reproduced by run kvm-unit-tests/hyperv_stimer.flat w/ CONFIG_PREEMPT and CONFIG_DEBUG_PREEMPT enabled. Safe access to per-CPU data requires a couple of constraints, though: the thread working with the data cannot be preempted and it cannot be migrated while it manipulates per-CPU variables. If the thread is preempted, the thread that replaces it could try to work with the same variables; migration to another CPU could also cause confusion. However there is no preemption disable when reads host per-CPU tsc rate to calculate the current kvmclock timestamp. This patch fixes it by utilizing get_cpu/put_cpu pair to guarantee both __this_cpu_read() and rdtsc() are not preempted. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: Freescale#8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . Freescale#9 [] tcp_rcv_established at ffffffff81580b64 Freescale#10 [] tcp_v4_do_rcv at ffffffff8158b54a Freescale#11 [] tcp_v4_rcv at ffffffff8158cd02 Freescale#12 [] ip_local_deliver_finish at ffffffff815668f4 Freescale#13 [] ip_local_deliver at ffffffff81566bd9 Freescale#14 [] ip_rcv_finish at ffffffff8156656d Freescale#15 [] ip_rcv at ffffffff81566f06 Freescale#16 [] __netif_receive_skb_core at ffffffff8152b3a2 Freescale#17 [] __netif_receive_skb at ffffffff8152b608 Freescale#18 [] netif_receive_skb at ffffffff8152b690 Freescale#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] Freescale#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] Freescale#21 [] net_rx_action at ffffffff8152bac2 Freescale#22 [] __do_softirq at ffffffff81084b4f Freescale#23 [] call_softirq at ffffffff8164845c Freescale#24 [] do_softirq at ffffffff81016fc5 Freescale#25 [] irq_exit at ffffffff81084ee5 Freescale#26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a777336 upstream. Authencesn template in decrypt path unconditionally calls aead_request_complete after ahash_verify which leads to following kernel panic in after decryption. [ 338.539800] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 338.548372] PGD 0 P4D 0 [ 338.551157] Oops: 0000 [#1] SMP PTI [ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13 [ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4] [ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b [ 338.598547] RSP: 0018:ffff911c97803c00 EFLAGS: 00010246 [ 338.604268] RAX: 0000000000000002 RBX: ffff911c4469ee00 RCX: 0000000000000000 [ 338.612090] RDX: 0000000000000000 RSI: 0000000000000130 RDI: ffff911b87c20400 [ 338.619874] RBP: 0000000000000000 R08: ffff911b87c20498 R09: 000000000000000a [ 338.627610] R10: 0000000000000001 R11: 0000000000000004 R12: 0000000000000000 [ 338.635402] R13: ffff911c89590000 R14: ffff911c91730000 R15: 0000000000000000 [ 338.643234] FS: 0000000000000000(0000) GS:ffff911c97800000(0000) knlGS:0000000000000000 [ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 338.658299] CR2: 0000000000000004 CR3: 00000001ec20a000 CR4: 00000000000006f0 [ 338.666382] Call Trace: [ 338.669051] <IRQ> [ 338.671254] esp_input_done+0x12/0x20 [esp4] [ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr] [ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr] [ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr] [ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4] [ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4] [ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90 [ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90 [ 338.712517] ? apic_update_irq_cfg+0x82/0xf0 [ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4] [ 338.722015] net_rx_action+0x2aa/0x3e0 [ 338.726136] __do_softirq+0xcb/0x280 [ 338.730054] irq_exit+0xde/0xf0 [ 338.733504] do_IRQ+0x54/0xd0 [ 338.736745] common_interrupt+0xf/0xf Fixes: 104880a ("crypto: authencesn - Convert to new AEAD...") Signed-off-by: Harsh Jain <harsh@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8f9c469 upstream. Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte 'enckeylen', followed by an authentication key and an encryption key. crypto_authenc_extractkeys() parses the key to find the inner keys. However, it fails to consider the case where the rtattr's payload is longer than 4 bytes but not 4-byte aligned, and where the key ends before the next 4-byte aligned boundary. In this case, 'keylen -= RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This causes a buffer overread and crash during crypto_ahash_setkey(). Fix it by restricting the rtattr payload to the expected size. Reproducer using AF_ALG: #include <linux/if_alg.h> #include <linux/rtnetlink.h> #include <sys/socket.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "authenc(hmac(sha256),cbc(aes))", }; struct { struct rtattr attr; __be32 enckeylen; char keys[1]; } __attribute__((packed)) key = { .attr.rta_len = sizeof(key), .attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */, }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key)); } It caused: BUG: unable to handle kernel paging request at ffff88007ffdc000 PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0 Oops: 0000 [#1] SMP CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37a7f27 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155 [...] Call Trace: sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321 crypto_shash_finup+0x1a/0x30 crypto/shash.c:178 shash_digest_unaligned+0x45/0x60 crypto/shash.c:186 crypto_shash_digest+0x24/0x40 crypto/shash.c:202 hmac_setkey+0x135/0x1e0 crypto/hmac.c:66 crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66 shash_async_setkey+0x10/0x20 crypto/shash.c:223 crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202 crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96 crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62 aead_setkey+0xc/0x10 crypto/algif_aead.c:526 alg_setkey crypto/af_alg.c:223 [inline] alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256 __sys_setsockopt+0x6d/0xd0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910 do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: e236d4a ("[CRYPTO] authenc: Move enckeylen into key itself") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 60f1bf2 upstream. When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0 ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a777336 upstream. Authencesn template in decrypt path unconditionally calls aead_request_complete after ahash_verify which leads to following kernel panic in after decryption. [ 338.539800] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 338.548372] PGD 0 P4D 0 [ 338.551157] Oops: 0000 [Freescale#1] SMP PTI [ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ Freescale#13 [ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4] [ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b [ 338.598547] RSP: 0018:ffff911c97803c00 EFLAGS: 00010246 [ 338.604268] RAX: 0000000000000002 RBX: ffff911c4469ee00 RCX: 0000000000000000 [ 338.612090] RDX: 0000000000000000 RSI: 0000000000000130 RDI: ffff911b87c20400 [ 338.619874] RBP: 0000000000000000 R08: ffff911b87c20498 R09: 000000000000000a [ 338.627610] R10: 0000000000000001 R11: 0000000000000004 R12: 0000000000000000 [ 338.635402] R13: ffff911c89590000 R14: ffff911c91730000 R15: 0000000000000000 [ 338.643234] FS: 0000000000000000(0000) GS:ffff911c97800000(0000) knlGS:0000000000000000 [ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 338.658299] CR2: 0000000000000004 CR3: 00000001ec20a000 CR4: 00000000000006f0 [ 338.666382] Call Trace: [ 338.669051] <IRQ> [ 338.671254] esp_input_done+0x12/0x20 [esp4] [ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr] [ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr] [ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr] [ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4] [ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4] [ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90 [ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90 [ 338.712517] ? apic_update_irq_cfg+0x82/0xf0 [ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4] [ 338.722015] net_rx_action+0x2aa/0x3e0 [ 338.726136] __do_softirq+0xcb/0x280 [ 338.730054] irq_exit+0xde/0xf0 [ 338.733504] do_IRQ+0x54/0xd0 [ 338.736745] common_interrupt+0xf/0xf Fixes: 104880a ("crypto: authencesn - Convert to new AEAD...") Signed-off-by: Harsh Jain <harsh@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8f9c469 upstream. Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte 'enckeylen', followed by an authentication key and an encryption key. crypto_authenc_extractkeys() parses the key to find the inner keys. However, it fails to consider the case where the rtattr's payload is longer than 4 bytes but not 4-byte aligned, and where the key ends before the next 4-byte aligned boundary. In this case, 'keylen -= RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This causes a buffer overread and crash during crypto_ahash_setkey(). Fix it by restricting the rtattr payload to the expected size. Reproducer using AF_ALG: #include <linux/if_alg.h> #include <linux/rtnetlink.h> #include <sys/socket.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "authenc(hmac(sha256),cbc(aes))", }; struct { struct rtattr attr; __be32 enckeylen; char keys[1]; } __attribute__((packed)) key = { .attr.rta_len = sizeof(key), .attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */, }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key)); } It caused: BUG: unable to handle kernel paging request at ffff88007ffdc000 PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0 Oops: 0000 [Freescale#1] SMP CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37a7f27 Freescale#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155 [...] Call Trace: sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321 crypto_shash_finup+0x1a/0x30 crypto/shash.c:178 shash_digest_unaligned+0x45/0x60 crypto/shash.c:186 crypto_shash_digest+0x24/0x40 crypto/shash.c:202 hmac_setkey+0x135/0x1e0 crypto/hmac.c:66 crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66 shash_async_setkey+0x10/0x20 crypto/shash.c:223 crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202 crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96 crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62 aead_setkey+0xc/0x10 crypto/algif_aead.c:526 alg_setkey crypto/af_alg.c:223 [inline] alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256 __sys_setsockopt+0x6d/0xd0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910 do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: e236d4a ("[CRYPTO] authenc: Move enckeylen into key itself") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 60f1bf2 upstream. When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ Freescale#13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ Freescale#13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0 ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 42dfa45 ] Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) Freescale#1 0x5625e5330a5e in zalloc util/util.h:23 Freescale#2 0x5625e5330a9b in perf_counts__new util/counts.c:10 Freescale#3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 Freescale#4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 Freescale#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 Freescale#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 Freescale#7 0x5625e51528e6 in run_test tests/builtin-test.c:358 Freescale#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 Freescale#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 Freescale#10 0x5625e515572f in cmd_test tests/builtin-test.c:722 Freescale#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 Freescale#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 Freescale#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 Freescale#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 Freescale#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) Freescale#1 0x5625e532560d in zalloc util/util.h:23 Freescale#2 0x5625e532566b in xyarray__new util/xyarray.c:10 Freescale#3 0x5625e5330aba in perf_counts__new util/counts.c:15 Freescale#4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 Freescale#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 Freescale#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 Freescale#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 Freescale#8 0x5625e51528e6 in run_test tests/builtin-test.c:358 Freescale#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 Freescale#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 Freescale#11 0x5625e515572f in cmd_test tests/builtin-test.c:722 Freescale#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 Freescale#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 Freescale#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 Freescale#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 Freescale#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <changbin.du@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a625357 ] Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e49 ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce Freescale#13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae ("arm64: module/ftrace: intialize PLT at load time") ... we can consistently determine the PLT address that a given callsite will use, and therefore ftrace_make_nop() does not need to skip validation when a PLT is in use. This patch factors the existing logic out of ftrace_make_call() and ftrace_make_nop() into a common ftrace_find_callable_addr() helper function, which is used by ftrace_make_call(), ftrace_make_nop(), and ftrace_modify_call(). In ftrace_make_nop() the patching is consistently validated by ftrace_modify_code() as we can always determine what the old instruction should have been. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) #1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 #2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 #3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 #4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 #5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 #6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 #7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 #8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 #9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 #10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 #11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 #7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 #8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 #7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 #8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 #9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 Freescale#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d Freescale#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 Freescale#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b Freescale#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb Freescale#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 Freescale#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Freescale#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] Freescale#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 Freescale#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 Freescale#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 Freescale#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 Freescale#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde Freescale#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b Freescale#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 Freescale#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a Freescale#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 Freescale#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca Freescale#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5c30e81 ] Skip the WRMSR fastpath in SVM's VM-Exit handler if the next RIP isn't valid, e.g. because KVM is running with nrips=false. SVM must decode and emulate to skip the WRMSR if the CPU doesn't provide the next RIP. Getting the instruction bytes to decode the WRMSR requires reading guest memory, which in turn means dereferencing memslots, and that isn't safe because KVM doesn't hold SRCU when the fastpath runs. Don't bother trying to enable the fastpath for this case, e.g. by doing only the WRMSR and leaving the "skip" until later. NRIPS is supported on all modern CPUs (KVM has considered making it mandatory), and the next RIP will be valid the vast, vast majority of the time. ============================= WARNING: suspicious RCU usage 6.0.0-smp--4e557fcd3d80-skip Freescale#13 Tainted: G O ----------------------------- include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by stable/206475: #0: ffff9d9dfebcc0f0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8b/0x620 [kvm] stack backtrace: CPU: 152 PID: 206475 Comm: stable Tainted: G O 6.0.0-smp--4e557fcd3d80-skip Freescale#13 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 Call Trace: <TASK> dump_stack_lvl+0x69/0xaa dump_stack+0x10/0x12 lockdep_rcu_suspicious+0x11e/0x130 kvm_vcpu_gfn_to_memslot+0x155/0x190 [kvm] kvm_vcpu_gfn_to_hva_prot+0x18/0x80 [kvm] paging64_walk_addr_generic+0x183/0x450 [kvm] paging64_gva_to_gpa+0x63/0xd0 [kvm] kvm_fetch_guest_virt+0x53/0xc0 [kvm] __do_insn_fetch_bytes+0x18b/0x1c0 [kvm] x86_decode_insn+0xf0/0xef0 [kvm] x86_emulate_instruction+0xba/0x790 [kvm] kvm_emulate_instruction+0x17/0x20 [kvm] __svm_skip_emulated_instruction+0x85/0x100 [kvm_amd] svm_skip_emulated_instruction+0x13/0x20 [kvm_amd] handle_fastpath_set_msr_irqoff+0xae/0x180 [kvm] svm_vcpu_run+0x4b8/0x5a0 [kvm_amd] vcpu_enter_guest+0x16ca/0x22f0 [kvm] kvm_arch_vcpu_ioctl_run+0x39d/0x900 [kvm] kvm_vcpu_ioctl+0x538/0x620 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 404d5d7 ("KVM: X86: Introduce more exit_fastpath_completion enum values") Signed-off-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20220930234031.1732249-1-seanjc@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb Freescale#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d Freescale#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc Freescale#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 Freescale#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] Freescale#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 Freescale#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa Freescale#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc Freescale#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e Freescale#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 Freescale#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 Freescale#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] Freescale#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] Freescale#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] Freescale#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 Freescale#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 Freescale#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 Freescale#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 Freescale#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 Freescale#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc Freescale#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d Freescale#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 Freescale#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 Freescale#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f Freescale#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f Freescale#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f Freescale#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d Freescale#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d Freescale#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 Freescale#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 Freescale#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac Freescale#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 Freescale#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 Freescale#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 Freescale#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 Freescale#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac Freescale#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d Freescale#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…plate commit 54abe19 upstream. When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [Freescale#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ Freescale#13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) Freescale#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) Freescale#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 Freescale#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 Freescale#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 Freescale#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 Freescale#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 Freescale#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 Freescale#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 Freescale#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 Freescale#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 Freescale#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 Freescale#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 Freescale#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) Freescale#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) Freescale#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 Freescale#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 Freescale#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 Freescale#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 Freescale#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 Freescale#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 Freescale#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 Freescale#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 Freescale#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 Freescale#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 Freescale#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 Freescale#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 Freescale#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 Freescale#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 Freescale#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 Freescale#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 Freescale#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 Freescale#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 Freescale#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 Freescale#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 Freescale#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 Freescale#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 Freescale#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 Freescale#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 Freescale#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 Freescale#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 Freescale#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 Freescale#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 Freescale#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 Freescale#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 Freescale#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 Freescale#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 Freescale#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 Freescale#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 Freescale#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 Freescale#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 Freescale#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 Freescale#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f Freescale#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 Freescale#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee Freescale#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 Freescale#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 Freescale#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c Freescale#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] Freescale#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] Freescale#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f Freescale#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 Freescale#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] Freescale#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc Freescale#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] Freescale#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] Freescale#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] Freescale#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] Freescale#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 Freescale#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] Freescale#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] Freescale#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 Freescale#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 Freescale#1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 Freescale#2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f Freescale#3 [fffffe0000549eb8] do_nmi at ffffffff81079582 Freescale#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- Freescale#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b Freescale#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 Freescale#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 Freescale#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] Freescale#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] Freescale#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] Freescale#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] Freescale#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb Freescale#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 Freescale#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 Freescale#15 [ffff88aa841efb88] device_del at ffffffff82179d23 Freescale#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] Freescale#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] Freescale#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a Freescale#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff Freescale#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 Freescale#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 Freescale#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 Freescale#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e Freescale#3 [fffffe00003fced0] do_nmi at ffffffff8922660d Freescale#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Freescale#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 Freescale#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 Freescale#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 Freescale#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 Freescale#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 Freescale#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 Freescale#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 Freescale#12 [ffffa65531497b68] printk at ffffffff89318306 Freescale#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 Freescale#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] Freescale#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] Freescale#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] Freescale#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] Freescale#18 [ffffa65531497f10] kthread at ffffffff892d2e72 Freescale#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 Freescale#1 __crash_kexec at ffffffff8c1338fa Freescale#2 panic at ffffffff8c1d69b9 Freescale#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] Freescale#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] Freescale#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] Freescale#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] Freescale#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] Freescale#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] Freescale#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] Freescale#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] Freescale#11 dio_complete at ffffffff8c2b9fa7 Freescale#12 do_blockdev_direct_IO at ffffffff8c2bc09f Freescale#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] Freescale#14 generic_file_direct_write at ffffffff8c1dcf14 Freescale#15 __generic_file_write_iter at ffffffff8c1dd07b Freescale#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] Freescale#17 aio_write at ffffffff8c2cc72e Freescale#18 kmem_cache_alloc at ffffffff8c248dde Freescale#19 do_io_submit at ffffffff8c2ccada Freescale#20 do_syscall_64 at ffffffff8c004984 Freescale#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5c0b485 ] syzkaller triggered the warning [0] in udp_v4_early_demux(). In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount of the looked-up sk and use sock_pfree() as skb->destructor, so we check SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace period. Currently, SOCK_RCU_FREE is flagged for a bound socket after being put into the hash table. Moreover, the SOCK_RCU_FREE check is done too early in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race window: CPU1 CPU2 ---- ---- udp_v4_early_demux() udp_lib_get_port() | |- hlist_add_head_rcu() |- sk = __udp4_lib_demux_lookup() | |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk)); `- sock_set_flag(sk, SOCK_RCU_FREE) We had the same bug in TCP and fixed it in commit 871019b ("net: set SOCK_RCU_FREE before inserting socket into hashtable"). Let's apply the same fix for UDP. [0]: WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Modules linked in: CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 Freescale#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52 RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001 RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680 R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738 netif_receive_skb_internal net/core/dev.c:5824 [inline] netif_receive_skb+0x271/0x300 net/core/dev.c:5884 tun_rx_batched drivers/net/tun.c:1549 [inline] tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x76f/0x8d0 fs/read_write.c:590 ksys_write+0xbf/0x190 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x41/0x50 fs/read_write.c:652 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fc44a68bc1f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48 RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8 RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000 </TASK> Fixes: 6acc9b4 ("bpf: Add helper to retrieve socket in BPF") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240709191356.24010-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 Freescale#1 __crash_kexec at ffffffff8c1338fa Freescale#2 panic at ffffffff8c1d69b9 Freescale#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] Freescale#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] Freescale#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] Freescale#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] Freescale#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] Freescale#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] Freescale#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] Freescale#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] Freescale#11 dio_complete at ffffffff8c2b9fa7 Freescale#12 do_blockdev_direct_IO at ffffffff8c2bc09f Freescale#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] Freescale#14 generic_file_direct_write at ffffffff8c1dcf14 Freescale#15 __generic_file_write_iter at ffffffff8c1dd07b Freescale#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] Freescale#17 aio_write at ffffffff8c2cc72e Freescale#18 kmem_cache_alloc at ffffffff8c248dde Freescale#19 do_io_submit at ffffffff8c2ccada Freescale#20 do_syscall_64 at ffffffff8c004984 Freescale#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5c0b485 ] syzkaller triggered the warning [0] in udp_v4_early_demux(). In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount of the looked-up sk and use sock_pfree() as skb->destructor, so we check SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace period. Currently, SOCK_RCU_FREE is flagged for a bound socket after being put into the hash table. Moreover, the SOCK_RCU_FREE check is done too early in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race window: CPU1 CPU2 ---- ---- udp_v4_early_demux() udp_lib_get_port() | |- hlist_add_head_rcu() |- sk = __udp4_lib_demux_lookup() | |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk)); `- sock_set_flag(sk, SOCK_RCU_FREE) We had the same bug in TCP and fixed it in commit 871019b ("net: set SOCK_RCU_FREE before inserting socket into hashtable"). Let's apply the same fix for UDP. [0]: WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Modules linked in: CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 Freescale#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52 RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001 RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680 R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738 netif_receive_skb_internal net/core/dev.c:5824 [inline] netif_receive_skb+0x271/0x300 net/core/dev.c:5884 tun_rx_batched drivers/net/tun.c:1549 [inline] tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x76f/0x8d0 fs/read_write.c:590 ksys_write+0xbf/0x190 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x41/0x50 fs/read_write.c:652 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fc44a68bc1f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48 RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8 RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000 </TASK> Fixes: 6acc9b4 ("bpf: Add helper to retrieve socket in BPF") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240709191356.24010-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 Freescale#1 __crash_kexec at ffffffff8c1338fa Freescale#2 panic at ffffffff8c1d69b9 Freescale#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] Freescale#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] Freescale#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] Freescale#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] Freescale#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] Freescale#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] Freescale#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] Freescale#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] Freescale#11 dio_complete at ffffffff8c2b9fa7 Freescale#12 do_blockdev_direct_IO at ffffffff8c2bc09f Freescale#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] Freescale#14 generic_file_direct_write at ffffffff8c1dcf14 Freescale#15 __generic_file_write_iter at ffffffff8c1dd07b Freescale#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] Freescale#17 aio_write at ffffffff8c2cc72e Freescale#18 kmem_cache_alloc at ffffffff8c248dde Freescale#19 do_io_submit at ffffffff8c2ccada Freescale#20 do_syscall_64 at ffffffff8c004984 Freescale#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5c0b485 ] syzkaller triggered the warning [0] in udp_v4_early_demux(). In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount of the looked-up sk and use sock_pfree() as skb->destructor, so we check SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace period. Currently, SOCK_RCU_FREE is flagged for a bound socket after being put into the hash table. Moreover, the SOCK_RCU_FREE check is done too early in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race window: CPU1 CPU2 ---- ---- udp_v4_early_demux() udp_lib_get_port() | |- hlist_add_head_rcu() |- sk = __udp4_lib_demux_lookup() | |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk)); `- sock_set_flag(sk, SOCK_RCU_FREE) We had the same bug in TCP and fixed it in commit 871019b ("net: set SOCK_RCU_FREE before inserting socket into hashtable"). Let's apply the same fix for UDP. [0]: WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Modules linked in: CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 Freescale#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52 RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001 RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680 R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738 netif_receive_skb_internal net/core/dev.c:5824 [inline] netif_receive_skb+0x271/0x300 net/core/dev.c:5884 tun_rx_batched drivers/net/tun.c:1549 [inline] tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x76f/0x8d0 fs/read_write.c:590 ksys_write+0xbf/0x190 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x41/0x50 fs/read_write.c:652 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fc44a68bc1f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48 RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8 RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000 </TASK> Fixes: 6acc9b4 ("bpf: Add helper to retrieve socket in BPF") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240709191356.24010-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] Freescale#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] Freescale#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 Freescale#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 Freescale#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 Freescale#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c Freescale#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b Freescale#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 Freescale#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 Freescale#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f Freescale#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d1bc560 ] Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <wojciech.gladysz@infogain.com> Link: https://patch.msgid.link/20240801143827.19135-1-wojciech.gladysz@infogain.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 63de35a ] An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]--- Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx_v6_v7_defconfig: Select the coda driver as module

d8c3728

The coda driver may be probed prior to the rootfs being available, leading to firmware loading failure. To avoid such problem, select the coda driver as module. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

otavio merged commit f7a5518 into Freescale:4.12.x+fslc Aug 23, 2017

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ARM: imx_v6_v7_defconfig: Select the coda driver as module #13

ARM: imx_v6_v7_defconfig: Select the coda driver as module #13

gibsson commented Aug 23, 2017

ARM: imx_v6_v7_defconfig: Select the coda driver as module #13

ARM: imx_v6_v7_defconfig: Select the coda driver as module #13

Conversation

gibsson commented Aug 23, 2017