Merge more stables #596
Merged
Merge more stables #596
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 78eb166 ] While reading sysctl_tcp_min_snd_mss, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5f3e2bf ("tcp: add tcp_min_snd_mss sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e92d44 ] While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c04b79b ("tcp: add new tcp_mtu_probe_floor sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92c0aa4 ] While reading sysctl_tcp_probe_threshold, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6b58e0a ("ipv4: Use binary search to choose tcp PMTU probe_size") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a85388 ] While reading sysctl_tcp_probe_interval, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 05cbc0d ("ipv4: Create probe timer for tcp PMTU as per RFC4821") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d9a159 ] If netif is running when stmmac_dvr_remove is invoked, the unregister_netdev will call ndo_stop(stmmac_release) and vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid). Currently, stmmac_dvr_remove() will disable pm runtime before unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked, pm_runtime_resume_and_get in it returns EACCESS error number, and reports: dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0 Move the pm_runtime_disable to the end of stmmac_dvr_remove to fix this issue. Fixes: 6449520 ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c7d89 ] Current stmmac driver will prepare/enable ptp_ref clock in stmmac_init_tstamp_counter(). The stmmac_pltfr_noirq_suspend will disable it once in suspend flow. But in resume flow, stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter ptp_ref clock reference counter increases twice, which leads to unbalance ptp clock when resume back. Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it. Fixes: 0735e63 ("net: stmmac: skip only stmmac_ptp_register when resume from suspend") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15e27d1 ] What to do when the real rate of the gpmi clock is not equal to the required one? The solutions proposed in [1] did not lead to a conclusion on how to validate the clock rate, so, inspired by the document [2], I consider the rate correct only if not lower or equal to the rate of the previous edo mode. In fact, in chapter 4.16.2 (NV-DDR) of the document [2], it is written that "If the host selects timing mode n, then its clock period shall be faster than the clock period of timing mode n-1 and slower than or equal to the clock period of timing mode n.". I thought that it could therefore also be used in this case, without therefore having to define the valid rate ranges empirically. For example, suppose that gpmi_nfc_compute_timings() is called to set edo mode 5 (100MHz) but the rate returned by clk_round_rate() is 80MHz (edo mode 4). In this case gpmi_nfc_compute_timings() will return error, and will be called again to set edo mode 4, which this time will be successful. [1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org [2] http://www.onfi.org/-/media/client/onfi/specs/onfi_3_0_gold.pdf?la=en Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220118095434.35081-4-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>
… times [ Upstream commit 0fddf9a ] 06781a5 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong though: It is calculated based on the maximum page read time, but the timeout is also used for page write and block erase operations which require orders of magnitude bigger timeouts. Fix this by calculating busy_timeout_cycles from the maximum of tBERS_max and tPROG_max. This is for now the easiest and most obvious way to fix the driver. There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us the desired timeout for the current operation, so we could program the timeout dynamically for each operation instead of setting a fixed timeout. Also we could wire up the interrupt handler to actually detect and forward timeouts occurred when waiting for the chip being ready. As a sidenote I verified that the change in 06781a5 is really correct. I wired up the interrupt handler in my tree and measured the time between starting the operation and the timeout interrupt handler coming in. The time increases 41us with each step in the timeout register which corresponds to 4096 clock cycles with the 99MHz clock that I have. Fixes: 06781a5 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Fixes: b120612 ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Han Xu <han.xu@nxp.com> Tested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a14bd74 ] In ksz_switch_register(), we should call of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 912aae2 ("net: dsa: microchip: really look for phy-mode in port nodes") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220714153138.375919-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c504e5c ] Introduce the interface kfree_skb_reason(), which is able to pass the reason why the skb is dropped to 'kfree_skb' tracepoint. Add the 'reason' field to 'trace_kfree_skb', therefor user can get more detail information about abnormal skb with 'drop_monitor' or eBPF. All drop reasons are defined in the enum 'skb_drop_reason', and they will be print as string in 'kfree_skb' tracepoint in format of 'reason: XXX'. ( Maybe the reasons should be defined in a uapi header file, so that user space can use them? ) Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8512559 ] Replace kfree_skb() with kfree_skb_reason() in tcp_v4_rcv(). Following drop reasons are added: SKB_DROP_REASON_NO_SOCKET SKB_DROP_REASON_PKT_TOO_SMALL SKB_DROP_REASON_TCP_CSUM SKB_DROP_REASON_TCP_FILTER After this patch, 'kfree_skb' event will print message like this: $ TASK-PID CPU# ||||| TIMESTAMP FUNCTION $ | | | ||||| | | <idle>-0 [000] ..s1. 36.113438: kfree_skb: skbaddr=(____ptrval____) protocol=2048 location=(____ptrval____) reason: NO_SOCKET The reason of skb drop is printed too. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c7fab7 ] Replace kfree_skb() with kfree_skb_reason() in __udp4_lib_rcv. New drop reason 'SKB_DROP_REASON_UDP_CSUM' is added for udp csum error. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 364df53 ] Rename SKB_DROP_REASON_SOCKET_FILTER, which is used as the reason of skb drop out of socket filter before it's part of a released kernel. It will be used for more protocols than just TCP in future series. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/all/20220127091308.91401-2-imagedong@tencent.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88590b3 ] Add document for following existing drop reasons: SKB_DROP_REASON_NOT_SPECIFIED SKB_DROP_REASON_NO_SOCKET SKB_DROP_REASON_PKT_TOO_SMALL SKB_DROP_REASON_TCP_CSUM SKB_DROP_REASON_SOCKET_FILTER SKB_DROP_REASON_UDP_CSUM Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2df3041 ] Replace kfree_skb() with kfree_skb_reason() in nf_hook_slow() when skb is dropped by reason of NF_DROP. Following new drop reasons are introduced: SKB_DROP_REASON_NETFILTER_DROP Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33cba42 ] Replace kfree_skb() with kfree_skb_reason() in ip_rcv_core(). Three new drop reasons are introduced: SKB_DROP_REASON_OTHERHOST SKB_DROP_REASON_IP_CSUM SKB_DROP_REASON_IP_INHDR Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1f166d ] Replace kfree_skb() with kfree_skb_reason() in ip_rcv_finish_core(), following drop reasons are introduced: SKB_DROP_REASON_IP_RPFILTER SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1f77ec ] Fix setting of 'Half Cycle' register for 400KHz frequency. Fixes: fa10491 ("i2c: mlxcpld: Modify register setting for 400KHz frequency") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…onal [ Upstream commit 4ca8ca8 ] Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab19 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb44a6 ] The test does not always correctly determine the number of events for hybrids, nor allow for more than 1 evsel when parsing. Fix by iterating the events actually created and getting the correct evsel for the events processed. Fixes: d9da6f7 ("perf tests: Support 'Convert perf time to TSC' test for hybrid") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 613b065 ] When queue number is > 4, left shift overflows due to 32 bits integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1. If CONFIG_UBSAN is enabled, kernel dumps below warning: [ 10.363842] ================================================================== [ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/ linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12 [ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int' [ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg [ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021 [ 10.363958] Call Trace: [ 10.363960] <TASK> [ 10.363963] dump_stack_lvl+0x4a/0x5f [ 10.363971] dump_stack+0x10/0x12 [ 10.363974] ubsan_epilogue+0x9/0x45 [ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e [ 10.363979] ? wake_up_klogd+0x4a/0x50 [ 10.363983] ? vprintk_emit+0x8f/0x240 [ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac] [ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac] [ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac] [ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac] [ 10.364030] ? page_pool_alloc_pages+0x4d/0x70 [ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac] [ 10.364042] stmmac_open+0x39e/0x920 [stmmac] [ 10.364050] __dev_open+0xf0/0x1a0 [ 10.364054] __dev_change_flags+0x188/0x1f0 [ 10.364057] dev_change_flags+0x26/0x60 [ 10.364059] do_setlink+0x908/0xc40 [ 10.364062] ? do_setlink+0xb10/0xc40 [ 10.364064] ? __nla_validate_parse+0x4c/0x1a0 [ 10.364068] __rtnl_newlink+0x597/0xa10 [ 10.364072] ? __nla_reserve+0x41/0x50 [ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0 [ 10.364079] ? pskb_expand_head+0x75/0x310 [ 10.364082] ? nla_reserve_64bit+0x21/0x40 [ 10.364086] ? skb_free_head+0x65/0x80 [ 10.364089] ? security_sock_rcv_skb+0x2c/0x50 [ 10.364094] ? __cond_resched+0x19/0x30 [ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420 [ 10.364100] rtnl_newlink+0x49/0x70 This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue mapping warning. Fixes: d43042f ("net: stmmac: mapping mtl rx to dma channel") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195 Reported-by: Cedric Wassenaar <cedric@bytespeed.nl> Signed-off-by: Junxiao Chang <junxiao.chang@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f08d8c1 ] Socket destruction flow and tls_device_down function sync against each other using tls_device_lock and the context refcount, to guarantee the device resources are freed via tls_dev_del() by the end of tls_device_down. In the following unfortunate flow, this won't happen: - refcount is decreased to zero in tls_device_sk_destruct. - tls_device_down starts, skips the context as refcount is zero, going all the way until it flushes the gc work, and returns without freeing the device resources. - only then, tls_device_queue_ctx_destruction is called, queues the gc work and frees the context's device resources. Solve it by decreasing the refcount in the socket's destruction flow under the tls_device_lock, for perfect synchronization. This does not slow down the common likely destructor flow, in which both the refcount is decreased and the spinlock is acquired, anyway. Fixes: e8f6979 ("net/tls: Add generic NIC offload infrastructure") Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6da226 ] While reading sysctl_igmp_llm_reports, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. if (ipv4_is_local_multicast(pmc->multiaddr) && !READ_ONCE(net->ipv4.sysctl_igmp_llm_reports)) Fixes: df2cf4a ("IGMP: Inhibit reports for local multicast groups") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6305d82 ] While reading sysctl_igmp_max_memberships, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ae0f2e ] While reading sysctl_igmp_max_msf, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2f316e ] While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a3b1c ] While reading sysctl_tcp_syn(ack)?_retries, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2e383b ] While reading sysctl_tcp_syncookies, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4177f54 ] While reading sysctl_tcp_migrate_req, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f9ac779 ("net: Introduce net.ipv4.tcp_migrate_req.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46778cd ] While reading sysctl_tcp_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebdec85 ] Adding the accounting flag when allocating pages within the SEV function, since these memory pages should belong to individual VM. No functional change intended. Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220623171858.2083637-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ This issue was fixed upstream by accident in c3cee92 ("arm64: head: cover entire kernel image in initial ID map") as part of a large refactoring of the arm64 boot flow. This simple fix is therefore preferred for -stable backporting ] On a system that implements FEAT_EPAN, read/write access to the idmap is denied because UXN is not set on the swapper PTEs. As a result, idmap_kpti_install_ng_mappings panics the kernel when accessing __idmap_kpti_flag. Fix it by setting UXN on these PTEs. Fixes: 18107f8 ("arm64: Support execute-only permissions with Enhanced PAN") Cc: <stable@vger.kernel.org> # 5.15 Link: https://linux-review.googlesource.com/id/Ic452fa4b4f74753e54f71e61027e7222a0fae1b1 Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220719234909.1398992-1-pcc@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 343d8a3 upstream. After commit 5f0addf ("btrfs: zoned: use dedicated lock for data relocation"), we observe IO errors on e.g, btrfs/232 like below. [09.0][T4038707] WARNING: CPU: 3 PID: 4038707 at fs/btrfs/extent-tree.c:2381 btrfs_cross_ref_exist+0xfc/0x120 [btrfs] <snip> [09.9][T4038707] Call Trace: [09.5][T4038707] <TASK> [09.3][T4038707] run_delalloc_nocow+0x7f1/0x11a0 [btrfs] [09.6][T4038707] ? test_range_bit+0x174/0x320 [btrfs] [09.2][T4038707] ? fallback_to_cow+0x980/0x980 [btrfs] [09.3][T4038707] ? find_lock_delalloc_range+0x33e/0x3e0 [btrfs] [09.5][T4038707] btrfs_run_delalloc_range+0x445/0x1320 [btrfs] [09.2][T4038707] ? test_range_bit+0x320/0x320 [btrfs] [09.4][T4038707] ? lock_downgrade+0x6a0/0x6a0 [09.2][T4038707] ? orc_find.part.0+0x1ed/0x300 [09.5][T4038707] ? __module_address.part.0+0x25/0x300 [09.0][T4038707] writepage_delalloc+0x159/0x310 [btrfs] <snip> [09.4][ C3] sd 10:0:1:0: [sde] tag#2620 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [09.5][ C3] sd 10:0:1:0: [sde] tag#2620 Sense Key : Illegal Request [current] [09.9][ C3] sd 10:0:1:0: [sde] tag#2620 Add. Sense: Unaligned write command [09.5][ C3] sd 10:0:1:0: [sde] tag#2620 CDB: Write(16) 8a 00 00 00 00 00 02 f3 63 87 00 00 00 2c 00 00 [09.4][ C3] critical target error, dev sde, sector 396041272 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0 [09.9][ C3] BTRFS error (device dm-1): bdev /dev/mapper/dml_102_2 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 The IO errors occur when we allocate a regular extent in previous data relocation block group. On zoned btrfs, we use a dedicated block group to relocate a data extent. Thus, we allocate relocating data extents (pre-alloc) only from the dedicated block group and vice versa. Once the free space in the dedicated block group gets tight, a relocating extent may not fit into the block group. In that case, we need to switch the dedicated block group to the next one. Then, the previous one is now freed up for allocating a regular extent. The BG is already not enough to allocate the relocating extent, but there is still room to allocate a smaller extent. Now the problem happens. By allocating a regular extent while nocow IOs for the relocation is still on-going, we will issue WRITE IOs (for relocation) and ZONE APPEND IOs (for the regular writes) at the same time. That mixed IOs confuses the write pointer and arises the unaligned write errors. This commit introduces a new bit 'zoned_data_reloc_ongoing' to the btrfs_block_group. We set this bit before releasing the dedicated block group, and no extent are allocated from a block group having this bit set. This bit is similar to setting block_group->ro, but is different from it by allowing nocow writes to start. Once all the nocow IO for relocation is done (hooked from btrfs_finish_ordered_io), we reset the bit to release the block group for further allocation. Fixes: c2707a2 ("btrfs: zoned: add a dedicated data relocation block group") CC: stable@vger.kernel.org # 5.16+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19ab78c upstream. We use btrfs_zoned_data_reloc_{lock,unlock} to allow only one process to write out to the relocation inode. That critical section must include all the IO submission for the inode. However, flush_write_bio() in extent_writepages() is out of the critical section, causing an IO submission outside of the lock. This leads to an out of the order IO submission and fail the relocation process. Fix it by extending the critical section. Fixes: 35156d8 ("btrfs: zoned: only allow one process to add pages to a relocation inode") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f17c2b upstream. The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Two subversions are added for the chip, because ROM firmware reports 002.002.013 (at least for the chips I have here), while depending on patchram firmware revision, either 002.002.013 or 002.002.014 is reported. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8cad62 upstream. CYW55572 is a Wi-Fi + Bluetooth combo device from Infineon. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88b6588 upstream. The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Extend the binding with its DT compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c69ecb0 upstream. It is 13d3:3568 for MediaTek MT7922 USB Bluetooth chip. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3568 Rev=01.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=... C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c379c96 upstream. Add the support ID(0x04CA, 0x4007) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4007 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 893fa8b upstream. Add the support ID(0x04c5, 0x1675) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1675 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b75ee3 upstream. Add the support ID(0x0CB8, 0xC558) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c558 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f0054d upstream. Add the support ID(0x13D3, 0x3587) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3587 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ad353d upstream. Add the support ID(0x13D3, 0x3586) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3586 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd97e4a upstream. In do_adb_query() function of drivers/macintosh/adb.c, req->data is copied form userland. The parameter "req->data[2]" is missing check, the array size of adb_handler[] is 16, so adb_handler[req->data[2]].original_address and adb_handler[req->data[2]].handler_id will lead to oob read. Cc: stable <stable@kernel.org> Signed-off-by: Ning Qiang <sohu0106@126.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220713153734.2248-1-sohu0106@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b12993 upstream. tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as documented for RET instructions after VM exits. Mitigate it with a new one-entry RSB stuffing mechanism and a new LFENCE. == Background == Indirect Branch Restricted Speculation (IBRS) was designed to help mitigate Branch Target Injection and Speculative Store Bypass, i.e. Spectre, attacks. IBRS prevents software run in less privileged modes from affecting branch prediction in more privileged modes. IBRS requires the MSR to be written on every privilege level change. To overcome some of the performance issues of IBRS, Enhanced IBRS was introduced. eIBRS is an "always on" IBRS, in other words, just turn it on once instead of writing the MSR on every privilege level change. When eIBRS is enabled, more privileged modes should be protected from less privileged modes, including protecting VMMs from guests. == Problem == Here's a simplification of how guests are run on Linux' KVM: void run_kvm_guest(void) { // Prepare to run guest VMRESUME(); // Clean up after guest runs } The execution flow for that would look something like this to the processor: 1. Host-side: call run_kvm_guest() 2. Host-side: VMRESUME 3. Guest runs, does "CALL guest_function" 4. VM exit, host runs again 5. Host might make some "cleanup" function calls 6. Host-side: RET from run_kvm_guest() Now, when back on the host, there are a couple of possible scenarios of post-guest activity the host needs to do before executing host code: * on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not touched and Linux has to do a 32-entry stuffing. * on eIBRS hardware, VM exit with IBRS enabled, or restoring the host IBRS=1 shortly after VM exit, has a documented side effect of flushing the RSB except in this PBRSB situation where the software needs to stuff the last RSB entry "by hand". IOW, with eIBRS supported, host RET instructions should no longer be influenced by guest behavior after the host retires a single CALL instruction. However, if the RET instructions are "unbalanced" with CALLs after a VM exit as is the RET in Freescale#6, it might speculatively use the address for the instruction after the CALL in Freescale#3 as an RSB prediction. This is a problem since the (untrusted) guest controls this address. Balanced CALL/RET instruction pairs such as in step Freescale#5 are not affected. == Solution == The PBRSB issue affects a wide variety of Intel processors which support eIBRS. But not all of them need mitigation. Today, X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e., eIBRS systems which enable legacy IBRS explicitly. However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT and most of them need a new mitigation. Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT. The lighter-weight mitigation performs a CALL instruction which is immediately followed by a speculative execution barrier (INT3). This steers speculative execution to the barrier -- just like a retpoline -- which ensures that speculation can never reach an unbalanced RET. Then, ensure this CALL is retired before continuing execution with an LFENCE. In other words, the window of exposure is opened at VM exit where RET behavior is troublesome. While the window is open, force RSB predictions sampling for RET targets to a dead end at the INT3. Close the window with the LFENCE. There is a subset of eIBRS systems which are not vulnerable to PBRSB. Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB. Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO. [ bp: Massage, incorporate review comments from Andy Cooper. ] Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba6e31a upstream. RSB fill sequence does not have any protection for miss-prediction of conditional branch at the end of the sequence. CPU can speculatively execute code immediately after the sequence, while RSB filling hasn't completed yet. #define __FILL_RETURN_BUFFER(reg, nr, sp) \ mov $(nr/2), reg; \ 771: \ ANNOTATE_INTRA_FUNCTION_CALL; \ call 772f; \ 773: /* speculation trap */ \ UNWIND_HINT_EMPTY; \ pause; \ lfence; \ jmp 773b; \ 772: \ ANNOTATE_INTRA_FUNCTION_CALL; \ call 774f; \ 775: /* speculation trap */ \ UNWIND_HINT_EMPTY; \ pause; \ lfence; \ jmp 775b; \ 774: \ add $(BITS_PER_LONG/8) * 2, sp; \ dec reg; \ jnz 771b; <----- CPU can miss-predict here. Before RSB is filled, RETs that come in program order after this macro can be executed speculatively, making them vulnerable to RSB-based attacks. Mitigate it by adding an LFENCE after the conditional branch to prevent speculation while RSB is being filled. Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220809175514.276643253@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Ron Economos <re@w6rz.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.15.51 stable release
This is the 5.15.52 stable release
This is the 5.15.53 stable release
This is the 5.15.54 stable release
Conflicts:
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
Resolved in favor of 54a6c78
Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
This is the 5.15.55 stable release
This is the 5.15.56 stable release Conflicts: arch/arm/mm/mmu.c Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
This is the 5.15.57 stable release Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
This is the 5.15.58 stable release Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
This is the 5.15.59 stable release Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
This is the 5.15.60 stable release Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Tested building
imx_v8_defconfigandimx_v7_defconfig