Greenpower3 support

docs/devices/ZG-102ZL.md

@@ -16,7 +16,7 @@ pageClass: device-page
 |     |     |
 |-----|-----|
 | Model | ZG-102ZL  |
-| Vendor  | [TuYa](/supported-devices/#v=TuYa)  |
+| Vendor  | TuYa  |
 | Description | Luminance door sensor |
 | Exposes | contact, illuminance, battery, linkquality |
 | Picture | ![TuYa ZG-102ZL](https://www.zigbee2mqtt.io/images/devices/ZG-102ZL.jpg) |
@@ -33,14 +33,13 @@ pairing process is in progress.
 
 
 
-
 ## Exposes
 
 ### Contact (binary)
-Indicates if the contact is closed (= true) or open (= false).
+Indicates whether the device detected occupancy.
 Value can be found in the published state on the `contact` property.
 It's not possible to read (`/get`) or write (`/set`) this value.
-If value equals `false` contact is ON, if `true` OFF.
+If value equals `true` occupancy is ON, if `false` OFF.
 
 ### Illuminance (numeric)
 Raw measured illuminance.
@@ -49,7 +48,7 @@ It's not possible to read (`/get`) or write (`/set`) this value.
 The unit of this value is `lx`.
 
 ### Battery (numeric)
-Remaining battery in %, can take up to 24 hours before reported..
+Remaining battery in %.
 Value can be found in the published state on the `battery` property.
 It's not possible to read (`/get`) or write (`/set`) this value.
 The minimal value is `0` and the maximum value is `100`.

docs/devices/ZG-205Z-A.md

@@ -0,0 +1,108 @@
+---
+title: "TuYa ZG-205Z control via MQTT"
+description: "Integrate your TuYa ZG-205Z via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway."
+addedAt: 2023-08-19T9:25:00
+pageClass: device-page
+---
+
+<!-- !!!! -->
+<!-- ATTENTION: This file is auto-generated through docgen! -->
+<!-- You can only edit the "Notes"-Section between the two comment lines "Notes BEGIN" and "Notes END". -->
+<!-- Do not use h1 or h2 heading within "## Notes"-Section. -->
+<!-- !!!! -->
+
+# TuYa ZG-205Z/A
+
+|     |     |
+|-----|-----|
+| Model | ZG-205Z/A  |
+| Vendor  | TuYa  |
+| Description | Mini 24Ghz human presence sensor |
+| Exposes | Presence, illuminance, Motion state, Large motion detection distance,Large motion detection sensitivity, Small motion detection distance,Small motion detection sensitivity,Static detection distance,Static detection sensitivity,Fading_time,indicator,linkquality |
+| Picture | ![TuYa ZG-205Z/A](https://www.zigbee2mqtt.io/images/devices/ZG-205Z-A.jpg) |
+
+
+<!-- Notes BEGIN: You can edit here. Add "## Notes" headline if not already present. -->
+## Notes
+
+### Pairing
+To start pairing, press the button (pinhole on the side of the device) using a
+pin/paperclip for approx. 5 seconds. The led will turn on, then start blinking while the
+pairing process is in progress.
+<!-- Notes END: Do not edit below this line -->
+
+
+
+## Exposes
+
+### Presence (binary)
+Indicates whether the device detected presence.
+Value can be found in the published state on the `presence` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+If value equals `true` presence is ON, if `false` OFF.
+
+### Motion state (enum)
+Indicates the motion state detected by the device (large movements, small movements, static).
+Value can be found in the published state on the `Motion state` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+If value equals 0:'none', 1:'large', 2:'small', 3:'static'
+
+### Illuminance (numeric)
+Raw measured illuminance.
+Value can be found in the published state on the `illuminance` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+The unit of this value is `lx`.
+
+### Large motion detection distance (numeric)
+Value can be found in the published state on the `large_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"large_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `10`.
+The unit of this value is `m`.
+
+### Large motion detection sensitivity (numeric)
+Value can be found in the published state on the `large_motion_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"large_motion_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`.The higher the value, the more sensitive it is.
+
+### Small motion detection distance (numeric)
+Value can be found in the published state on the `small_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{small_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `6`.
+The unit of this value is `m`.
+
+### Small motion detection sensitivity (numeric)
+Value can be found in the published state on the `small_motion_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"small_motion_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`. The higher the value, the more sensitive it is.
+
+### Static detection distance (numeric)
+Value can be found in the published state on the `static_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"static_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `6`.
+The unit of this value is `m`.
+
+### Static detection sensitivity (numeric)
+Value can be found in the published state on the `static_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"static_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`. The higher the value, the more sensitive it is.
+
+
+### Fading_time (numeric)
+Fading time.
+Value can be found in the published state on the `fading_time` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"fading_time": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `3600`.
+The unit of this value is `s`.
+
+### Indicator (binary)
+You can turn the indicator on or off
+Value can be found in the published state on the `indicator` property.
+It's possible to read (`/get`) or write (`/set`) this value.
+If value equals `true` presence is ON, if `false` OFF.
+
+### Linkquality (numeric)
+Link quality (signal strength).
+Value can be found in the published state on the `linkquality` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+The minimal value is `0` and the maximum value is `255`.
+The unit of this value is `lqi`.

docs/devices/ZG-205ZL.md

@@ -0,0 +1,125 @@
+---
+title: "TuYa ZG-205ZL control via MQTT"
+description: "Integrate your TuYa ZG-205ZL via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway."
+addedAt: 2023-08-19T9:25:00
+pageClass: device-page
+---
+
+<!-- !!!! -->
+<!-- ATTENTION: This file is auto-generated through docgen! -->
+<!-- You can only edit the "Notes"-Section between the two comment lines "Notes BEGIN" and "Notes END". -->
+<!-- Do not use h1 or h2 heading within "## Notes"-Section. -->
+<!-- !!!! -->
+
+# TuYa ZG-205ZL
+
+|     |     |
+|-----|-----|
+| Model | ZG-205ZL  |
+| Vendor  | TuYa  |
+| Description |24Ghz human presence sensor |
+| Exposes | Presence, illuminance, Motion state, Large motion detection distance,Large motion detection sensitivity, Small motion detection distance,Small motion detection sensitivity,Static detection distance,Static detection sensitivity,Fading_time,indicator,linkquality |
+| Picture | ![TuYa ZG-205ZL](https://www.zigbee2mqtt.io/images/devices/ZG-205ZL.jpg) |
+
+
+<!-- Notes BEGIN: You can edit here. Add "## Notes" headline if not already present. -->
+## Notes
+
+### Pairing
+To start pairing, press the button (pinhole on the side of the device) using a
+pin/paperclip for approx. 5 seconds. The led will turn on, then start blinking while the
+pairing process is in progress.
+<!-- Notes END: Do not edit below this line -->
+
+
+
+## Exposes
+
+### Presence (binary)
+Indicates whether the device detected presence.
+Value can be found in the published state on the `presence` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+If value equals `true` presence is ON, if `false` OFF.
+
+### Motion state (enum)
+Indicates the motion state detected by the device (large movements, small movements, static).
+Value can be found in the published state on the `Motion state` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+If value equals 0:'none', 1:'large', 2:'small', 3:'static'
+
+### Illuminance (numeric)
+Raw measured illuminance.
+Value can be found in the published state on the `illuminance` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+The unit of this value is `lx`.
+
+### Large motion detection distance (numeric)
+Value can be found in the published state on the `large_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"large_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `10`.
+The unit of this value is `m`.
+
+### Large motion detection sensitivity (numeric)
+Value can be found in the published state on the `large_motion_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"large_motion_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`.The higher the value, the more sensitive it is.
+
+### Small motion detection distance (numeric)
+Value can be found in the published state on the `small_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{small_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `6`.
+The unit of this value is `m`.
+
+### Small motion detection sensitivity (numeric)
+Value can be found in the published state on the `small_motion_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"small_motion_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`. The higher the value, the more sensitive it is.
+
+### Static detection distance (numeric)
+Value can be found in the published state on the `static_motion_detection_distance` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"static_motion_detection_distance": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `6`.
+The unit of this value is `m`.
+
+### Static detection sensitivity (numeric)
+Value can be found in the published state on the `static_detection_sensitivity` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"static_detection_sensitivity": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `9`. The higher the value, the more sensitive it is.
+
+
+### Fading_time (numeric)
+Fading time.
+Value can be found in the published state on the `fading_time` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"fading_time": NEW_VALUE}`.
+The minimal value is `0` and the maximum value is `3600`.
+The unit of this value is `s`.
+
+### Working mode (enum)
+Indicates the working mode by the device (arm, off, alarm,doorbell).
+Value can be found in the published state on the `Working mode` property.
+It's possible to read (`/get`) or write (`/set`) this value.
+If value equals 0:'arm', 1:'off', 2:'alarm', 3:'doorbell'
+
+
+### Alarm Volume (enum)
+Value can be found in the published state on the `alarm_volume` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"alarm_volume": NEW_VALUE}`.
+value equals 0:'low', 1:'medium', 2:'high', 3:'mute'
+
+### Alarm time (enum)
+Value can be found in the published state on the `alarm_time` property.
+To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"alarm_time": NEW_VALUE}`.
+The unit of this value is `minute`.
+
+### Light mode (binary)
+You can turn the indicator on or off
+Value can be found in the published state on the `light_mode` property.
+It's possible to read (`/get`) or write (`/set`) this value.
+If value equals `true` presence is ON, if `false` OFF.
+
+### Linkquality (numeric)
+Link quality (signal strength).
+Value can be found in the published state on the `linkquality` property.
+It's not possible to read (`/get`) or write (`/set`) this value.
+The minimal value is `0` and the maximum value is `255`.
+The unit of this value is `lqi`.

docs/devices/ZG-225Z.md

@@ -1,6 +1,6 @@
 ---
 title: "TuYa ZG-225Z control via MQTT"
-description: "Integrate your TuYa ZG-225Z via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway."
+description: "Integrate your TuYa ZG-227ZL via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway."
 addedAt: 2022-11-09T12:35:00Z
 pageClass: device-page
 ---
@@ -16,9 +16,9 @@ pageClass: device-page
 |     |     |
 |-----|-----|
 | Model | ZG-225Z  |
-| Vendor  | [TuYa](/supported-devices/#v=TuYa)  |
-| Description | Gas sensor |
-| Exposes | gas, gas_value, linkquality |
+| Vendor  | TuYa  |
+| Description | Gas detection sensor |
+| Exposes | gas, gas_value |
 | Picture | ![TuYa ZG-225Z](https://www.zigbee2mqtt.io/images/devices/ZG-225Z.jpg) |
 
 
@@ -32,26 +32,15 @@ pairing process is in progress.
 <!-- Notes END: Do not edit below this line -->
 
 
+## Options
+
 
 
 ## Exposes
 
-### Gas (binary)
+### Gas (boolean)
 Indicates whether the device detected gas.
-Value can be found in the published state on the `gas` property.
-It's not possible to read (`/get`) or write (`/set`) this value.
-If value equals `true` gas is ON, if `false` OFF.
 
 ### Gas_value (numeric)
 Measured gas concentration.
-Value can be found in the published state on the `gas_value` property.
-It's not possible to read (`/get`) or write (`/set`) this value.
-The unit of this value is `ppm`.
-
-### Linkquality (numeric)
-Link quality (signal strength).
-Value can be found in the published state on the `linkquality` property.
-It's not possible to read (`/get`) or write (`/set`) this value.
-The minimal value is `0` and the maximum value is `255`.
-The unit of this value is `lqi`.
-
+0~1000ppm