2.1.0

This release adds some useful features to GoWired Touch firmware and makes sure Modules firmware keeps up. Changes:

• Second Long press and change the process of handling Long presses in Touch modules (now the order is as follows: detect Long press -> send high state to the controller -> launch rainbow LED effect on LEDs -> send low state to the controller)
• Refactor and changes to reporting power sensor values (Report changes bigger than 100 mA (Modules&Touch); report periodically redardless of value (Touch))
• Refactor UpdateIO
• Shutter relays turn of as soon as current sensor detects no current flow (assumed reaching end position)
• New calibration by message options: touch fields calibration, watchdog test/module restart, erase EEPROM and restart
• Now shutter stops before touch fields calibration is launched
• New method of calibrating touch fields: unused touch field is now utilize to detect reference change

2.0.0

This release introduces some important changes to GoWired software. From now on the software will require a GoWired-lib library added to Arduino IDE to compile. GoWired-lib is available via the Arduino Library Manager and installs with most GoWired dependencies (3rd party libraries this software uses). Other changes:

• The code has been rebuilt and unified to use the same GoWired-lib library files
• GoWired Touch software is now also available in Software directory of GoWired-Project repository
• New sensor type: Configuration Sensor, which enables configuration options by message or through notify.mysensors Home Assistant service
• Roller shutter calibration can now be called out using message / notify.mysensors service
• 8RelayDin software is now fixed, improved and ready to use (operation with security sensors, possibility of inverting input logic, possibility of declaring inputs & outputs as independent entities)
• Improved shutters / blinds operation procedure
• Improved reading inputs procedure
• Various improvements & bugfixes

1.3.0

• Reorganize folders, add descriptions
• Change the way software handles IOs
• Add software for 8RelayDin Shield
• Relocate Multiprotocol Gateway to separate repository
• Improvements to dimmer operation (new function for simultaneous change of brightness and colours)

1.2.0

• Added AVR watchdog to Modules
• Fixed a bug in which roller shutter modules set open position of a roller shutter after reboot; now the position is recovered from EEPROM
• Roller shutter is now a state machine
• No while loops in roller shutter regular operation
• Current measurement during roller shutter movement
• Roller shutter now reports directions of movement to the controller
• Changes to safety procedures (thermal & electrical software fuses) and to entire main loop
• Protection against millis() overflow
• Minor improvements.

1.1.0

• Important changes to Ethernet Gateway firmware: added AVR Watchdog and controller uplink testing; minor improvements
• Important changes to Heating Controller software, including improved coopeation with Home Assistant; Heating Controller software can now be used with any GoWired shield
• Thermal protection for dimmers
• Fixed a bug causing repetitive calling of InitConfirmation() function in case when no output was configured
• Using restart button on a gateway now does not restart modules connected to it
• PRESENTATION_DELAY to improve presentation accuracy
• Some minor improvements

v1.0.0

• Support for Home Assistant
• DC current measurement
• Improved analog sensors accuracy
• New, more advanced procedure of updating current values to the controller
• Support for defining cos(fi) value of the load for current sensor
• New "Quick config" section in Configuration.h
• Roller shutter autocalibration
• SHT30 temp&hum sensor support
• New feature: controlling dimmers from buttons
• Fixes to reading inputs (INPUT_1 - INPUT_4)