Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Made TCP congestion control documentation match current reality,
    from Anmol Sarma.

 2) Various build warning and failure fixes from Arnd Bergmann.

 3) Fix SKB list leak in ipv6_gso_segment().

 4) Use after free in ravb driver, from Eugeniu Rosca.

 5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet.

 6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme
    Piccoli.

 7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping
    Zhang.

 8) Use after free in vxlan deletion, from Mark Bloch.

 9) Fix ordering of NAPI poll enabled in ethoc driver, from Max
    Filippov.

10) Fix stmmac hangs with TSO, from Niklas Cassel.

11) Fix crash in CALIPSO ipv6, from Richard Haines.

12) Clear nh_flags properly on mpls link up. From Roopa Prabhu.

13) Fix regression in sk_err socket error queue handling, noticed by
    ping applications. From Soheil Hassas Yeganeh.

14) Update mlx4/mlx5 MAINTAINERS information.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
  net: stmmac: fix a broken u32 less than zero check
  net: stmmac: fix completely hung TX when using TSO
  net: ethoc: enable NAPI before poll may be scheduled
  net: bridge: fix a null pointer dereference in br_afspec
  ravb: Fix use-after-free on `ifconfig eth0 down`
  net/ipv6: Fix CALIPSO causing GPF with datagram support
  net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value
  Revert "sit: reload iphdr in ipip6_rcv"
  i40e/i40evf: proper update of the page_offset field
  i40e: Fix state flags for bit set and clean operations of PF
  iwlwifi: fix host command memory leaks
  iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265
  iwlwifi: mvm: clear new beacon command template struct
  iwlwifi: mvm: don't fail when removing a key from an inexisting sta
  iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3
  iwlwifi: mvm: fix firmware debug restart recording
  iwlwifi: tt: move ucode_loaded check under mutex
  iwlwifi: mvm: support ibss in dqa mode
  iwlwifi: mvm: Fix command queue number on d0i3 flow
  iwlwifi: mvm: rs: start using LQ command color
  ...

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -26,6 +26,10 @@ Optional properties:
 - interrupt-controller	: Indicates the switch is itself an interrupt
 			  controller. This is used for the PHY interrupts.
 #interrupt-cells = <2>	: Controller uses two cells, number and flag
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
 - mdio			: Container of PHY and devices on the switches MDIO
 			  bus.
 - mdio?		: Container of PHYs and devices on the external MDIO

Documentation/networking/dpaa.txt

@@ -0,0 +1,194 @@
+The QorIQ DPAA Ethernet Driver
+==============================
+
+Authors:
+Madalin Bucur <madalin.bucur@nxp.com>
+Camelia Groza <camelia.groza@nxp.com>
+
+Contents
+========
+
+	- DPAA Ethernet Overview
+	- DPAA Ethernet Supported SoCs
+	- Configuring DPAA Ethernet in your kernel
+	- DPAA Ethernet Frame Processing
+	- DPAA Ethernet Features
+	- Debugging
+
+DPAA Ethernet Overview
+======================
+
+DPAA stands for Data Path Acceleration Architecture and it is a
+set of networking acceleration IPs that are available on several
+generations of SoCs, both on PowerPC and ARM64.
+
+The Freescale DPAA architecture consists of a series of hardware blocks
+that support Ethernet connectivity. The Ethernet driver depends upon the
+following drivers in the Linux kernel:
+
+ - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms)
+    drivers/iommu/fsl_*
+ - Frame Manager (FMan)
+    drivers/net/ethernet/freescale/fman
+ - Queue Manager (QMan), Buffer Manager (BMan)
+    drivers/soc/fsl/qbman
+
+A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
+
+  dpaa_eth       /eth0\     ...       /ethN\
+  driver        |      |             |      |
+  -------------   ----   -----------   ----   -------------
+       -Ports  / Tx  Rx \    ...    / Tx  Rx \
+  FMan        |          |         |          |
+       -MACs  |   MAC0   |         |   MACN   |
+             /   dtsec0   \  ...  /   dtsecN   \ (or tgec)
+            /              \     /              \(or memac)
+  ---------  --------------  ---  --------------  ---------
+      FMan, FMan Port, FMan SP, FMan MURAM drivers
+  ---------------------------------------------------------
+      FMan HW blocks: MURAM, MACs, Ports, SP
+  ---------------------------------------------------------
+
+The dpaa_eth relation to the QMan, BMan and FMan:
+              ________________________________
+  dpaa_eth   /            eth0                \
+  driver    /                                  \
+  ---------   -^-   -^-   -^-   ---    ---------
+  QMan driver / \   / \   / \  \   /  | BMan    |
+             |Rx | |Rx | |Tx | |Tx |  | driver  |
+  ---------  |Dfl| |Err| |Cnf| |FQs|  |         |
+  QMan HW    |FQ | |FQ | |FQs| |   |  |         |
+             /   \ /   \ /   \  \ /   |         |
+  ---------   ---   ---   ---   -v-    ---------
+            |        FMan QMI         |         |
+            | FMan HW       FMan BMI  | BMan HW |
+              -----------------------   --------
+
+where the acronyms used above (and in the code) are:
+DPAA = Data Path Acceleration Architecture
+FMan = DPAA Frame Manager
+QMan = DPAA Queue Manager
+BMan = DPAA Buffers Manager
+QMI = QMan interface in FMan
+BMI = BMan interface in FMan
+FMan SP = FMan Storage Profiles
+MURAM = Multi-user RAM in FMan
+FQ = QMan Frame Queue
+Rx Dfl FQ = default reception FQ
+Rx Err FQ = Rx error frames FQ
+Tx Cnf FQ = Tx confirmation FQs
+Tx FQs = transmission frame queues
+dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
+tgec = ten gigabit Ethernet controller (10 Gbps)
+memac = multirate Ethernet MAC (10/100/1000/10000)
+
+DPAA Ethernet Supported SoCs
+============================
+
+The DPAA drivers enable the Ethernet controllers present on the following SoCs:
+
+# PPC
+P1023
+P2041
+P3041
+P4080
+P5020
+P5040
+T1023
+T1024
+T1040
+T1042
+T2080
+T4240
+B4860
+
+# ARM
+LS1043A
+LS1046A
+
+Configuring DPAA Ethernet in your kernel
+========================================
+
+To enable the DPAA Ethernet driver, the following Kconfig options are required:
+
+# common for arch/arm64 and arch/powerpc platforms
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_XGMAC_MDIO=y
+
+# for arch/powerpc only
+CONFIG_FSL_PAMU=y
+
+# common options needed for the PHYs used on the RDBs
+CONFIG_VITESSE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_AQUANTIA_PHY=y
+
+DPAA Ethernet Frame Processing
+==============================
+
+On Rx, buffers for the incoming frames are retrieved from one of the three
+existing buffers pools. The driver initializes and seeds these, each with
+buffers of different sizes: 1KB, 2KB and 4KB.
+
+On Tx, all transmitted frames are returned to the driver through Tx
+confirmation frame queues. The driver is then responsible for freeing the
+buffers. In order to do this properly, a backpointer is added to the buffer
+before transmission that points to the skb. When the buffer returns to the
+driver on a confirmation FQ, the skb can be correctly consumed.
+
+DPAA Ethernet Features
+======================
+
+Currently the DPAA Ethernet driver enables the basic features required for
+a Linux Ethernet driver. The support for advanced features will be added
+gradually.
+
+The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx
+checksum offload feature is enabled by default and cannot be controlled through
+ethtool.
+
+The driver has support for multiple prioritized Tx traffic classes. Priorities
+range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with
+strict priority levels. Each traffic class contains NR_CPU TX queues. By
+default, only one traffic class is enabled and the lowest priority Tx queues
+are used. Higher priority traffic classes can be enabled with the mqprio
+qdisc. For example, all four traffic classes are enabled on an interface with
+the following command. Furthermore, skb priority levels are mapped to traffic
+classes as follows:
+
+	* priorities 0 to 3 - traffic class 0 (low priority)
+	* priorities 4 to 7 - traffic class 1 (medium-low priority)
+	* priorities 8 to 11 - traffic class 2 (medium-high priority)
+	* priorities 12 to 15 - traffic class 3 (high priority)
+
+tc qdisc add dev <int> root handle 1: \
+	 mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
+
+Debugging
+=========
+
+The following statistics are exported for each interface through ethtool:
+
+	- interrupt count per CPU
+	- Rx packets count per CPU
+	- Tx packets count per CPU
+	- Tx confirmed packets count per CPU
+	- Tx S/G frames count per CPU
+	- Tx error count per CPU
+	- Rx error count per CPU
+	- Rx error count per type
+	- congestion related statistics:
+		- congestion status
+		- time spent in congestion
+		- number of time the device entered congestion
+		- dropped packets count per cause
+
+The driver also exports the following information in sysfs:
+
+	- the FQ IDs for each FQ type
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/fqids
+
+	- the IDs of the buffer pools in use
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/bpids

Documentation/networking/tcp.txt

@@ -1,7 +1,7 @@
 TCP protocol
 ============
 
-Last updated: 9 February 2008
+Last updated: 3 June 2017
 
 Contents
 ========
@@ -29,18 +29,19 @@ As of 2.6.13, Linux supports pluggable congestion control algorithms.
 A congestion control mechanism can be registered through functions in
 tcp_cong.c. The functions used by the congestion control mechanism are
 registered via passing a tcp_congestion_ops struct to
-tcp_register_congestion_control. As a minimum name, ssthresh,
-cong_avoid must be valid.
+tcp_register_congestion_control. As a minimum, the congestion control
+mechanism must provide a valid name and must implement either ssthresh,
+cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook.
 
 Private data for a congestion control mechanism is stored in tp->ca_priv.
 tcp_ca(tp) returns a pointer to this space.  This is preallocated space - it
 is important to check the size of your private data will fit this space, or
-alternatively space could be allocated elsewhere and a pointer to it could
+alternatively, space could be allocated elsewhere and a pointer to it could
 be stored here.
 
 There are three kinds of congestion control algorithms currently: The
 simplest ones are derived from TCP reno (highspeed, scalable) and just
-provide an alternative the congestion window calculation. More complex
+provide an alternative congestion window calculation. More complex
 ones like BIC try to look at other events to provide better
 heuristics.  There are also round trip time based algorithms like
 Vegas and Westwood+.
@@ -49,21 +50,15 @@ Good TCP congestion control is a complex problem because the algorithm
 needs to maintain fairness and performance. Please review current
 research and RFC's before developing new modules.
 
-The method that is used to determine which congestion control mechanism is
-determined by the setting of the sysctl net.ipv4.tcp_congestion_control.
-The default congestion control will be the last one registered (LIFO);
-so if you built everything as modules, the default will be reno. If you
-build with the defaults from Kconfig, then CUBIC will be builtin (not a
-module) and it will end up the default.
+The default congestion control mechanism is chosen based on the
+DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default
+value then you can set it using sysctl net.ipv4.tcp_congestion_control. The
+module will be autoloaded if needed and you will get the expected protocol. If
+you ask for an unknown congestion method, then the sysctl attempt will fail.
 
-If you really want a particular default value then you will need
-to set it with the sysctl.  If you use a sysctl, the module will be autoloaded
-if needed and you will get the expected protocol. If you ask for an
-unknown congestion method, then the sysctl attempt will fail.
-
-If you remove a tcp congestion control module, then you will get the next
+If you remove a TCP congestion control module, then you will get the next
 available one. Since reno cannot be built as a module, and cannot be
-deleted, it will always be available.
+removed, it will always be available.
 
 How the new TCP output machine [nyi] works.
 ===========================================

MAINTAINERS

@@ -8508,15 +8508,14 @@ S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*
 
 MELLANOX MLX4 core VPI driver
-M:	Yishai Hadas <yishaih@mellanox.com>
+M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx4/
 F:	include/linux/mlx4/
-F:	include/uapi/rdma/mlx4-abi.h
 
 MELLANOX MLX4 IB driver
 M:	Yishai Hadas <yishaih@mellanox.com>
@@ -8526,6 +8525,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
+F:	include/uapi/rdma/mlx4-abi.h
 
 MELLANOX MLX5 core VPI driver
 M:	Saeed Mahameed <saeedm@mellanox.com>
@@ -8538,7 +8538,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
-F:	include/uapi/rdma/mlx5-abi.h
 
 MELLANOX MLX5 IB driver
 M:	Matan Barak <matanb@mellanox.com>
@@ -8549,6 +8548,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx5/
 F:	include/linux/mlx5/
+F:	include/uapi/rdma/mlx5-abi.h
 
 MELEXIS MLX90614 DRIVER
 M:	Crt Mori <cmo@melexis.com>

arch/arm/boot/dts/imx6ul-14x14-evk.dts

@@ -120,10 +120,16 @@
 
 		ethphy0: ethernet-phy@2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };

drivers/isdn/i4l/isdn_ppp.c

@@ -2364,7 +2364,7 @@ static struct ippp_ccp_reset_state *isdn_ppp_ccp_reset_alloc_state(struct ippp_s
 		       id);
 		return NULL;
 	} else {
-		rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_KERNEL);
+		rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_ATOMIC);
 		if (!rs)
 			return NULL;
 		rs->state = CCPResetIdle;

drivers/isdn/mISDN/stack.c

@@ -75,7 +75,7 @@ send_socklist(struct mISDN_sock_list *sl, struct sk_buff *skb)
 		if (sk->sk_state != MISDN_BOUND)
 			continue;
 		if (!cskb)
-			cskb = skb_copy(skb, GFP_KERNEL);
+			cskb = skb_copy(skb, GFP_ATOMIC);
 		if (!cskb) {
 			printk(KERN_WARNING "%s no skb\n", __func__);
 			break;

drivers/net/dsa/mv88e6xxx/global2.h

@@ -114,13 +114,13 @@ static inline int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip,
 	return -EOPNOTSUPP;
 }
 
-int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip, int src_dev,
-			   int src_port, u16 data)
+static inline int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip,
+					 int src_dev, int src_port, u16 data)
 {
 	return -EOPNOTSUPP;
 }
 
-int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip)
+static inline int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip)
 {
 	return -EOPNOTSUPP;
 }

drivers/net/ethernet/amd/xgbe/xgbe-desc.c

@@ -324,7 +324,7 @@ static int xgbe_map_rx_buffer(struct xgbe_prv_data *pdata,
 			      struct xgbe_ring *ring,
 			      struct xgbe_ring_data *rdata)
 {
-	int order, ret;
+	int ret;
 
 	if (!ring->rx_hdr_pa.pages) {
 		ret = xgbe_alloc_pages(pdata, &ring->rx_hdr_pa, GFP_ATOMIC, 0);
@@ -333,9 +333,8 @@ static int xgbe_map_rx_buffer(struct xgbe_prv_data *pdata,
 	}
 
 	if (!ring->rx_buf_pa.pages) {
-		order = max_t(int, PAGE_ALLOC_COSTLY_ORDER - 1, 0);
 		ret = xgbe_alloc_pages(pdata, &ring->rx_buf_pa, GFP_ATOMIC,
-				       order);
+				       PAGE_ALLOC_COSTLY_ORDER);
 		if (ret)
 			return ret;
 	}

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -2026,9 +2026,12 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 	priv->num_rx_desc_words = params->num_rx_desc_words;
 
 	priv->irq0 = platform_get_irq(pdev, 0);
-	if (!priv->is_lite)
+	if (!priv->is_lite) {
 		priv->irq1 = platform_get_irq(pdev, 1);
-	priv->wol_irq = platform_get_irq(pdev, 2);
+		priv->wol_irq = platform_get_irq(pdev, 2);
+	} else {
+		priv->wol_irq = platform_get_irq(pdev, 1);
+	}
 	if (priv->irq0 <= 0 || (priv->irq1 <= 0 && !priv->is_lite)) {
 		dev_err(&pdev->dev, "invalid interrupts\n");
 		ret = -EINVAL;