-
-
Notifications
You must be signed in to change notification settings - Fork 86
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
- Loading branch information
Showing
8 changed files
with
1,760 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,9 @@ | ||
Version Update V1.2.3.21 | ||
|
||
1. Add Z-axis offset save control and risk reminder confirmation pop-up interface. | ||
2. Boot animation: change the page to a green theme. | ||
3. Fixed frequent disconnections of the cloud camera, optimized WebRTC connection speed. | ||
4. Adjusted the camera AI interface layout. | ||
5. Adjusted leveling anomaly prompts. | ||
6. Fixed other known UI issues. | ||
7. Updated privacy policy text. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,9 @@ | ||
Version Update V1.2.3.21 | ||
|
||
1. Add Z-axis offset save control and risk reminder confirmation pop-up interface. | ||
2. Boot animation: change the page to a green theme. | ||
3. Fixed frequent disconnections of the cloud camera, optimized WebRTC connection speed. | ||
4. Adjusted the camera AI interface layout. | ||
5. Adjusted leveling anomaly prompts. | ||
6. Fixed other known UI issues. | ||
7. Updated privacy policy text. |
351 changes: 351 additions & 0 deletions
351
downloads/Stock Config Files/Ender-3V3/1.2.3.21/factory_printer.cfg
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,351 @@ | ||
# K1-MAX | ||
# Printer_size: 300x300x300 | ||
# Version: v1.0.1 | ||
# CreateDate: 2023/03/21 | ||
# Nozzle_mcu: chip: GD32F303CBT6 | ||
# version: K1-NOZZLE-M_V12 | ||
# Leveling_mcu: chip: GD32E230F8P6 | ||
# version: K1-MAX-L-V11 | ||
# mcu: chip: GD32F303RET6 | ||
# version: CR4CU220812S12 | ||
|
||
[include sensorless.cfg] | ||
[include gcode_macro.cfg] | ||
[include printer_params.cfg] | ||
|
||
[mcu] | ||
serial: /dev/ttyS7 | ||
baud: 230400 | ||
restart_method: command | ||
|
||
[mcu nozzle_mcu] | ||
serial: /dev/ttyS1 | ||
baud: 230400 | ||
restart_method: command | ||
|
||
[mcu leveling_mcu] | ||
serial: /dev/ttyS9 | ||
baud: 230400 | ||
restart_method: command | ||
|
||
[verify_heater extruder] | ||
[verify_heater heater_bed] | ||
|
||
[mcu rpi] | ||
serial: /tmp/klipper_host_mcu | ||
|
||
[bl24c16f] | ||
i2c_mcu: rpi | ||
i2c_bus: i2c.2 | ||
i2c_speed: 400000 | ||
|
||
[idle_timeout] | ||
timeout: 99999999 | ||
|
||
[virtual_sdcard] | ||
path: /usr/data/printer_data/gcodes | ||
|
||
[gcode_arcs] | ||
resolution: 1.0 | ||
|
||
[temperature_sensor mcu_temp] | ||
sensor_type: temperature_mcu | ||
min_temp: 0 | ||
max_temp: 100 | ||
|
||
[temperature_sensor chamber_temp] | ||
sensor_type: EPCOS 100K B57560G104F | ||
sensor_pin: PC5 | ||
min_temp: -273 | ||
max_temp: 999 | ||
|
||
[stepper_x] | ||
step_pin: PC2 | ||
dir_pin: !PB9 | ||
enable_pin: !PC3 | ||
microsteps: 32 | ||
rotation_distance: 72 | ||
endstop_pin: tmc2209_stepper_x:virtual_endstop | ||
position_endstop: 306.5 | ||
position_min: -2 | ||
position_max: 306.5 | ||
homing_speed: 36 | ||
homing_retract_dist:0 | ||
|
||
[tmc2209 stepper_x] | ||
uart_pin:PA9 | ||
interpolate: True | ||
run_current:1.5 | ||
hold_current:1.0 | ||
sense_resistor: 0.100 | ||
stealthchop_threshold: 0 | ||
uart_address:3 | ||
diag_pin: ^PB12 | ||
# driver_IHOLDDELAY: 8 | ||
# driver_TPOWERDOWN: 20 | ||
# driver_TBL: 1 | ||
# driver_TOFF: 1 | ||
# driver_HEND: 0 | ||
# driver_HSTRT: 7 | ||
driver_SGTHRS: 65 | ||
|
||
[stepper_y] | ||
step_pin: PB8 | ||
dir_pin: !PB7 | ||
enable_pin: !PC3 | ||
microsteps: 32 | ||
rotation_distance: 72 | ||
endstop_pin: tmc2209_stepper_y:virtual_endstop | ||
position_endstop: -2 | ||
position_min: -2 | ||
position_max: 306 | ||
homing_speed: 36 | ||
homing_retract_dist:0 | ||
|
||
[tmc2209 stepper_y] | ||
uart_pin:PA10 | ||
interpolate: True | ||
run_current:1.5 | ||
hold_current:1.0 | ||
sense_resistor: 0.100 | ||
stealthchop_threshold: 0 | ||
uart_address:3 | ||
diag_pin: ^PB13 | ||
# driver_IHOLDDELAY: 8 | ||
# driver_TPOWERDOWN: 20 | ||
# driver_TBL: 1 | ||
# driver_TOFF: 1 | ||
# driver_HEND: 0 | ||
# driver_HSTRT: 7 | ||
driver_SGTHRS: 65 | ||
|
||
[stepper_z] | ||
step_pin: PB6 | ||
dir_pin: !PB5 | ||
enable_pin: !PC3 | ||
microsteps: 16 | ||
rotation_distance:8 | ||
gear_ratio: 64:20 | ||
endstop_pin: tmc2209_stepper_z:virtual_endstop# PA15 #probe:z_virtual_endstop | ||
position_endstop: 0 | ||
position_max: 305 | ||
position_min: -10 | ||
homing_speed: 10 | ||
second_homing_speed: 1 | ||
homing_retract_dist: 2.0 | ||
|
||
[tmc2209 stepper_z] | ||
uart_pin: PA11 | ||
uart_address: 3 | ||
run_current: 0.8 | ||
diag_pin: ^PB14 | ||
stealthchop_threshold: 0 | ||
sense_resistor: 0.100 | ||
# driver_IHOLDDELAY: 8 | ||
# driver_TPOWERDOWN: 20 | ||
# driver_TBL: 1 | ||
# driver_TOFF: 1 | ||
# driver_HEND: 2 | ||
# driver_HSTRT: 2 | ||
driver_SGTHRS: 0 | ||
|
||
[extruder] | ||
max_extrude_only_distance: 1000.0 | ||
max_extrude_cross_section: 80 | ||
step_pin: nozzle_mcu:PB1 | ||
dir_pin: nozzle_mcu:PB0 | ||
enable_pin: !nozzle_mcu:PB2 | ||
microsteps: 16 | ||
rotation_distance: 6.9 | ||
nozzle_diameter: 0.400 | ||
filament_diameter: 1.750 | ||
heater_pin: nozzle_mcu:PB7 | ||
sensor_type: EPCOS 100K B57560G104F | ||
sensor_pin: nozzle_mcu:PA0 | ||
pressure_advance: 0.04 | ||
pressure_advance_smooth_time: 0.040 | ||
control: pid | ||
pid_Kp: 25.013 | ||
pid_Ki: 2.566 | ||
pid_Kd: 60.966 | ||
min_temp: 0 | ||
max_temp: 320 | ||
|
||
[tmc2209 extruder] | ||
uart_pin: nozzle_mcu: PB11 | ||
tx_pin: nozzle_mcu: PB10 | ||
uart_address: 3 | ||
run_current: 0.5 | ||
sense_resistor: 0.150 | ||
stealthchop_threshold: 0 | ||
# driver_IHOLDDELAY: 8 | ||
# driver_TPOWERDOWN: 20 | ||
# driver_TBL: 2 | ||
# driver_TOFF: 3 | ||
# driver_HEND: 0 | ||
# driver_HSTRT: 5 | ||
|
||
[heater_bed] | ||
heater_pin: PC12 | ||
sensor_type: EPCOS 100K B57560G104F | ||
sensor_pin: PC4 | ||
control: pid | ||
pid_Kp: 54.901 | ||
pid_Ki: 1.142 | ||
pid_Kd: 375.483 | ||
min_temp: 0 | ||
max_temp: 140 | ||
|
||
[filament_switch_sensor filament_sensor] | ||
pause_on_runout: true | ||
switch_pin: ^!PC15 | ||
|
||
[multi_pin heater_fans] | ||
pins:nozzle_mcu:PB5 | ||
|
||
[heater_fan hotend_fan] | ||
pin: multi_pin:heater_fans | ||
heater: extruder | ||
heater_temp: 40 | ||
|
||
[static_digital_output my_fan_output_pins] | ||
pins: nozzle_mcu: PB6 | ||
|
||
[output_pin fan0] | ||
pin: nozzle_mcu: PB8 | ||
pwm: True | ||
cycle_time: 0.0100 | ||
hardware_pwm: false | ||
value: 0.00 | ||
scale: 255 | ||
shutdown_value: 0.0 | ||
|
||
[output_pin fan1] | ||
pin: PC0 | ||
pwm: True | ||
cycle_time: 0.0100 | ||
hardware_pwm: false | ||
value: 0.00 | ||
scale: 255 | ||
shutdown_value: 0.0 | ||
|
||
[output_pin fan2] | ||
pin: PB1 | ||
pwm: True | ||
cycle_time: 0.0100 | ||
hardware_pwm: false | ||
value: 0.00 | ||
scale: 255 | ||
shutdown_value: 0.0 | ||
|
||
[output_pin LED] | ||
pin:PB0 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[output_pin PA0] | ||
pin:PA0 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[output_pin PB2] | ||
pin:PB2 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[output_pin PB10] | ||
pin:PB10 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[output_pin PC8] | ||
pin:PC8 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[output_pin PC9] | ||
pin:PC9 | ||
pwm: True | ||
cycle_time: 0.010 | ||
|
||
[adxl345] | ||
cs_pin: nozzle_mcu:PA4 | ||
spi_speed: 5000000 | ||
axes_map: x,-z,y | ||
spi_software_sclk_pin: nozzle_mcu:PA5 | ||
spi_software_mosi_pin: nozzle_mcu:PA7 | ||
spi_software_miso_pin: nozzle_mcu:PA6 | ||
|
||
[resonance_tester] | ||
accel_chip: adxl345 | ||
accel_per_hz: 50 | ||
probe_points: | ||
150,150,10 | ||
|
||
[prtouch_v2] | ||
z_offset: 0 | ||
step_base:2 | ||
pres_cnt: 4 | ||
#show_msg: True | ||
noz_ex_com: 0.1 | ||
tilt_corr_dis: 0.00 | ||
#pres0_clk_pins: leveling_mcu:PA5 | ||
#pres0_sdo_pins: leveling_mcu:PA1 | ||
#pres1_clk_pins: leveling_mcu:PA2 | ||
#pres1_sdo_pins: leveling_mcu:PA0 | ||
#pres2_clk_pins: leveling_mcu:PA6 | ||
#pres2_sdo_pins: leveling_mcu:PA3 | ||
#pres3_clk_pins: leveling_mcu:PA7 | ||
#pres3_sdo_pins: leveling_mcu:PA4 | ||
#step_swap_pin: mcu:PC10 | ||
#pres_swap_pin: leveling_mcu:PB1 | ||
pres0_clk_pins: leveling_mcu:PB13 | ||
pres0_sdo_pins: leveling_mcu:PB12 | ||
pres1_clk_pins: leveling_mcu:PB15 | ||
pres1_sdo_pins: leveling_mcu:PB14 | ||
pres2_clk_pins: leveling_mcu:PA9 | ||
pres2_sdo_pins: leveling_mcu:PA8 | ||
pres3_clk_pins: leveling_mcu:PA11 | ||
pres3_sdo_pins: leveling_mcu:PA10 | ||
step_swap_pin: mcu:PC10 | ||
pres_swap_pin: leveling_mcu:PA12 | ||
best_above_z: 2 | ||
low_spd_nul:2 | ||
rdy_xy_spd:400 | ||
clr_noz_start_x: 85 | ||
clr_noz_start_y: 219 | ||
clr_noz_len_x: 50 | ||
clr_noz_len_y: 2 | ||
tri_min_hold:2000 | ||
tri_hftr_cut:1 | ||
|
||
# correct_tri_hold: 6000 | ||
# correct_step_mm: 0.02 | ||
z_high_default: -264.0 | ||
min_z_pos: -250 | ||
retract_z_dist: 230 | ||
retract_z_speed: 3600 | ||
|
||
|
||
[bed_mesh] | ||
speed: 150 | ||
mesh_min: 5,5 | ||
mesh_max: 295,295 | ||
probe_count: 5,5 | ||
fade_start: 3.0 | ||
fade_end: 10.0 | ||
|
||
[display_status] | ||
|
||
[printer] | ||
kinematics: corexy | ||
max_velocity: 1000 | ||
max_accel: 20000 | ||
max_accel_to_decel: 10000 | ||
max_z_velocity: 20 | ||
square_corner_velocity: 5.0 | ||
max_z_accel: 300 | ||
|
||
|
||
|
||
[pause_resume] |
Oops, something went wrong.