This is a tool which allows batch upload and download of mods for both Space Engineers and Medieval Engineers.
It is also known as SEWT (for Space Engineers Workshop Tool), or MEWT (Medieval Engineers Workshop Tool).
This tools allows you to script mod uploads to the workshop. It takes various command-line options, which can be displayed by running SEWorkshopTool.exe without arguments.
Please note, this is a command-line application only. A GUI may be considered in the future, however at this time it is not planned.
If you are not interested in building this from source, skip ahead to Installation.
- Build Tools for Visual Studio 2017 15.7 or higher at a minimum.
- Or the full Visual Studio Community 2017 15.7 or higher, if preferred instead
- JetBrains Rider is reported as working by the community as another alternative
- .NET Framework 4.8 Targeting Pack for Visual Studio, or the Developer Pack if using the Build Tools
- SE targets this version
- .NET Core SDK 2.1.300 or higher
- A copy of Space (or Medieval) Engineers on Steam
- If either Steam or the game aren't found, the binaries will be downloaded from the Dedicated Server depot.
- A purchased copy of the game is still required to run the workshop tool, but not to build it.
These steps refer to Space Engineers. If you are working with Medieval Engineers, just subsititute as appropriate.
- Clone repository.
- If using Visual Studio
- Open WorkshopTool.sln.
- If Steam and Space Engineers (or Medieval) are installed, they should be detected during the build and the project references to the game DLLs should automatically update. If not, you will need to manually create the junction. If there is a problem, the error message in the build output will explain how to create that manually.
- Select Release, Any CPU, and build the solution.
- If using the Build Tools, or don't want to open the IDE
- Execute build.bat (Double click, or run from a command prompt)
- Copy the following files into the Space Engineers Bin64 directory above: SEWorkshopTool.exe, SEWorkshopTool.exe.config, CommandLine.dll, and steam_appid.txt.
- Alternatively, just grab SEWorkshopTool-latest.zip in the output folder, and extract that to the Bin64 directory.
- Open a command prompt in the Space Engineers Bin64 directory as used above.
- Run the tool with the appropriate options.
- Either build from source, or download the most recent version over on the releases page.
- Extract the contents of SEWorkshopTool-*.zip or MEWorkshopTool-*.zip (depending on the game you have) into the respective game's installation folder (e.g. %ProgramFiles(x86)%\Steam\steamapps\common\SpaceEngineers\Bin64).
- The files can also be placed in the parent folder, outside of Bin64 (e.g. steamapps\common\SpaceEngineers)
- Advanced users can extract the zip anywhere and create a junction to the game's Bin64 folder at the same level where the executable is located. The steps for that are beyond the scope of this document. While this will work, it is not a currently supported installation method.
This may be automated in the future. - If there was a previous installation, and mod.io was used, save a copy of SEWorkshopTool.config before overwriting. This has your authentication token. If this is lost you will be required to re-authenticate to mod.io to upload there again.
You'll need to manually copy your authentication information from the old .config, and place it in the new one. See the section on mod.io for an example of what to look for.
- Move .wtignore to %AppData%\SpaceEngineers\Mods or %AppData%\MedievalEngineers\Mods, as appropriate, and edit to taste.
- This can be skipped if this step was completed previously.
- Open a Command Prompt or Powershell prompt in the above installation location (where the zip was extracted).
- Hold down Shift and Right-click in a blank area to open the context menu in the folder, then select Open command window here or Open PowerShell window here.
- Execute
SEWorkshopTool.exe(.\SEWorkshopTool.exein PowerShell) to get started. - See the examples below.
Want to skip ahead to the important bits?
- Uploading a mod
- Changing an item's preview image (thumbnail)
- Setting item visibility
- Adding workshop tags
- Adding dependencies or DLC
- Setting a change note
- Updating the workshop description
- Excluding files from publish/push
- Downloading a mod or collection
Starting with 0.7.14, the command-line argument format has changed. The examples below have been updated to reflect this change.
The previous command-line options will still be accepted at least until 0.8, and a warning will show if you attempt to use one, with the corrected format displayed.
In addition, some defaults changed:
- --compile is now default (when appropriate), use --no-compile to disable compilation testing.
- --extract is now default, use --no-extract to disable automatic extraction to %AppData%.
- --dev has been removed. The development tag is no longer supported on mods, and will be removed from any updated mods. Using the option will not report an error, but it will not work. This argument only exists in the legacy (pre-0.7.14) command-line format, for compatibility, and will eventually be removed entirely.
Commands are broken down into several distinct categories:
- get - Download workshop items
- push - Push (upload) changes to workshop items
- change - Push metadata changes to items
- compile - Compile test local mod
- cloud - Manage Steam Cloud storage
Each category corresponds to a command 'verb'. The various verbs are shown in more detail below.
Any command-line can be appended with --help to get a listing of the the arguments accepted by the program, or the specified verb.
For example:
- To show the list of verbs:
SEWorkshopTool --help - To show the accepted arguments for the push verb:
SEWorkshopTool push --help
- Previously --download
To download a set of mods, use the get verb. Then supply a list of workshop IDs with the --ids argument.
SEWorkshopTool get --ids 754173702 681276386
To download a collection or collections, use the exact same command as above. Then supply a list of collection IDs with the --ids argument.
SEWorkshopTool get --ids 814381863
Workshop items will be automatically extracted to their respective locations in %AppData%.
If this is not desired, you can prevent this by passing --no-extract:
SEWorkshopTool get --no-extract --mods 754173702 681276386
They will be extracted to their appropriate directory in the format: [_SEWT_] <Workshop Title> (<WorkshopId>)
- Previously --upload
To upload a mod, execute the following:
SEWorkshopTool push --mods %appdata%\SpaceEngineers\Mods\FTL
To upload multiple mods at the same time, just append more directories to the command:
SEWorkshopTool push --mods %appdata%\SpaceEngineers\Mods\FTL %appdata%\SpaceEngineers\Mods\Stargate
Relative paths are allowed and, if used, the default data path for that mod type will be prepended:
SEWorkshopTool push --mods FTL Stargate --script Off-Roading
By default, --compile is enabled, if you want to publish a script even if it has compilaiton errors, you can use the --no-compile argument to disable the compilation check:
SEWorkshopTool push --no-compile --mods FTL %appdata%\SpaceEngineers\Mods\Stargate
For compile testing, refer to the new compile verb.
If you prefer to test publishing, but not actually publish, you can use the --dry-run argument:
SEWorkshopTool push --dry-run --mods FTL %appdata%\SpaceEngineers\Mods\Stargate
If the mod directory or name contains spaces, surround the path with double-quotes:
SEWorkshopTool push --mods "%appdata%\SpaceEngineers\Mods\Mod Folder" "My Fabulous Mod"
- .wtignore added in 0.7.5
You can pass custom file extensions to ignore during the upload with the --exclude-ext argument (with or without a leading dot):
SEWorkshopTool push --mods FTL --exclude-ext .fbx .pdb xml
You can pass custom paths to ignore during the upload with the --exclude-path argument:
SEWorkshopTool push --mods FTL --exclude-path bin obj
Note: The --exclude-ext and --exclude-path are recommended for one-time use. For a regular list of extensions or paths to be ignored for all publish operations, use a .wtignore file.
See the change verb below for more options that apply to this verb.
- Added in 0.7.8
The workshop changelog can also be set with the content changes, using the --message argument.
Assuming you have your changelog stored inside changelog.txt, setting the changelog for this specific operation is similiar:
SEWorkshopTool change --mods FTL --message changelog.txt
If your changelog is short, you can specify the entire message as the argument, instead of a filename:
SEWorkshopTool change --mods FTL --message "Made a fix for the latest SE version."
If you specify the changelog as a filename, it's recommended to add your changelog filename to .wtignore to avoid uploading it as a file in your mod content.
Notes:
The changelog option first checks if the supplied argument is an existing file. If it is, it reads the contents. If not, it simply uses the argument as-is as the changelog note.
Be sure to check the output for the message that will be sent to Steam (the log will show a shortened version, but the entire content will be sent to steam).
It's important to surround the message with double-quotes.
The changelog requires a content update and as such, it's not a valid option for metadata changes.
- Previously the default if neither --upload nor --download were specified.
The change verb allows you change various metadata about a mod, without actually pushing a content change.
All arguments below also apply to the push verb. They are just listed once, and separately, for brevity.
- Added in 0.5.4
You can update the the preview image (thumb.jpg) separately, without reuploading the entire mod. This also works for updating tags, DLC and dependencies as well.
To update the thumbnail (any image steam supports, can be in any location):
SEWorkshopTool change --mods FTL --thumb "path\to\filename"
By default, any thumb.* file (thumb.jpg, .png, etc.) in the mod folder will be automatically detected and used during normal push operations.
To upload a with hidden visibility:
SEWorkshopTool change --mods "Mod Folder" --visibility Private
You can specify the mod categories/tags with the --tags argument:
SEWorkshopTool change --mods FTL --tags block script
Note with Tags:
If you do not specify any tags, then the existing tags on the workshop will be preserved (for updating mods). However if you specify any tags using --tags, then all tags will be replaced with what was entered.
For example: If a workshop mod contains the Block and Script categories, and you pass only --tags block, then Script will be removed.
This does not apply to --add-tags or --remove-tags.
Starting with 0.7.14, tags can be added or removed selectively, with the --add-tags or --remove-tags options, respectively:
SEWorkshopTool change --mods FTL --add-tags script --remove-tags block
The above command will add the script tag, if it wasn't already present on the workshop item; it will also remove the 'block' tag if it was present. All other tags will remain untouched.
- Added in 0.6.1
You can add DLC as a requirement for workshop items.
This is highly recommended if you intend to upload mods using DLC assets.
To see the list of the available DLC:
SEWorkshopTool.exe --listdlc
To set a mod as requiring the Style Pack DLC:
SEWorkshopTool change --mods FTL --dlc StylePack
or
SEWorkshopTool change --mods FTL --dlc 1084680
Notice that either the string name, or the AppID of the DLC can be specified.
To easily remove all DLC from an item, pass either 0 or none as the argument:
SEWorkshopTool change --mods FTL --dlc none
As with tags, starting with 0.7.14, you can add or remove individual DLC items with --add-dlc and --remove-dlc, respectively, without affecting existing DLC listed on the item.
- Added in 0.7.1
You can add other workshop items as a requirement for your items. This operates similar to the DLC requirement feature.
To set a mod as requiring another mod:
SEWorkshopTool change --mods FTL --dependencies 1992410560
To easily remove all dependencies from an item, pass either 0 or none as the argument:
SEWorkshopTool change --mods FTL --dependencies none
As with tags, starting with 0.7.14, you can add or remove individual item dependencies with --add-dependencies or --remove-dependencies, respectively, without affecting existing dependencies listed on the item.
For convenience, local mods can be specified, as long as they have already been published. The Workshop ID will be determined from the local mod or mods, if possible.
Notes:
Dependencies must be workshop items under the Mod category. Blueprints, IngameScripts, and other items cannot be specified as dependencies, and will cause errors in the game if used. This tool will enforce that restriction, and cannot be overridden.
- Added in 0.7.8
The entire workshop description can be set from the contents of a file using --description.
If you have a file in your mod directory named description.txt, you can set your workshop page to the contents of that file using the following:
SEWorkshopTool change --mods FTL --description description.txt
It is recommended to add your description file to .wtignore, so it isn't uploaded with the mod file contents (unless you want to do that).
Unlike the changelog option, this requires a filename. Passing the content directly on the command-line is not allowed.
Notes:
Steam limits the workshop description to 8k bytes. For unicode, that means 4k characters.
- Previously just --compile or --upload --compile --dry-run
This command is useful for only compile testing mods, without uploading.
This accepts a subset of the arguments of push, but only applies to Progammable Block (ingame) scripts, and mods.
Example: SEWorkshopTool compile --mods FTL %appdata%\SpaceEngineers\Mods\Stargate
- Previously --clearsteamcloud
- Added in 0.6.0
To see a listing of all the files associated on your Steam cloud account:
SEWorkshopTool cloud --list
The result will display a tabular list of all the steam cloud files, their size, and status.
Example output:
Quota: total = 390,625 kiB, available = 389,692 kiB
Listing 13 cloud files
Filename |Size (kiB)|In Cloud|Forgotten
------------------------------------------|----------|--------|---------
Blueprints/cloud/Large Grid 836/bp.sbc | 2 | True | N/A
Blueprints/cloud/Large Grid 836/thumb.png | 457 | True | N/A
previewfile_1668739492.gif | 1,018 | False | N/A
previewfile_754173702.jpg | 21 | False | N/A
previewfile_637504549.png | 219 | True | N/A
previewfile_1992410560.png | 219 | False | N/A
previewfile_714651334.png | 364 | False | N/A
previewfile_1701891397.jpg | 312 | False | N/A
previewfile_1473969256.png | 536 | False | N/A
previewfile_2200904480.jpg | 182 | False | N/A
previewfile_2217821984.jpg | 267 | False | N/A
previewfile_633376731.png | 364 | False | N/A
previewfile_2362147824.jpg | 254 | True | N/A
- Filename - The filename of the item. Use this name when referencing it for other operations.
- Size - This is the size of the file, in kiB (base 2 kilobytes)
- In Cloud - True or false if this file is actually stored on the cloud (consuming cloud storage)
- True - File is stored on the cloud, and consuming cloud storage space
- False - File is only stored locally, and is not consuming cloud storage space (deleting it won't free space)
- Forgotten/Deleted - True or false if the file was successfully deleted or forgotten.
- True - File was succesfully forgotten (deleted on cloud, but still stored locally), or deleted (deleted on cloud and locally).
- False - File was not succesfully forgotten or deleted. Check steam logs.
- N/A - This column is not applicable to the current operation. Ignore.
This naming scheme comes from the Steamworks API for FileForget and FileDelete.
- Forget means the file has been deleted from the cloud storage, but is still present in the local cache. This file will remain accessible in the API for the local machine only.
- Delete means the file has been deleted from both cloud and local storage. The file is really gone.
To see a listing of all the files associated on your Steam cloud account:
SEWorkshopTool cloud --list
To delete a file from the cloud, but keep it locally (forget):
SEWorkshopTool cloud --delete "Blueprints/cloud/Large Grid 836/bp.sbc"
To permanently delete a file both locally and on the cloud (delete):
SEWorkshopTool cloud --delete --force "Blueprints/cloud/Large Grid 836/bp.sbc"
Either of the above operations (forget or delete) will print the file list again, and populate the rightmost column in the list with True if the forget or delete operation was successful.
Support for .gitignore style ignore list (but simpler). This file is .wtignore, and can be placed either in your mod directory, or in the parent Mods\ directory, ie. %appdata%\SpaceEngineers\Mods. An example file is included with the release zip, just copy it to one of the directories above and edit to taste. Further documentation is in the file itself.
Mod.io support, for uploading or downloading mods used by the XBox version.
THIS IS EXPERIMENTAL AND BUGGY
It can only upload and download mods. It cannot update tags. Thumbnail editing is untested.
Authentication is required, this is done via email. SEWT does not ask for your account password!
If you do not want to use SEWT for authentication, you might be able to manually create an OAuth2 token from the mod.io website, however this is untested.
If so, add the following to SEWorkshopTool.exe.config, just below:
<appSettings>
<add key="auth-login" value="your mod.io email address" />
<add key="auth-token" value="your mod.io token here" />
<add key="auth-expires" value="unix timestamp expiration" />
</appSettings>To switch to mod.io, use the --modio option, in combination with all the other commands.
For example, to upload a large ship blueprint named "My First Ship":
SEWorkshopTool.exe push --modio --blueprints "My First Ship" --tags ship,large_grid
