Boot issue with latest 5.10.0 and 5.4.83 kernels #251
Comments
|
According to this comment raspberrypi/firmware/issues it is a problem with GPU firmware. It can be solved so far by using previous start*.elf, fixup*.dat, bootcode.bin. |
popcornmix
added a commit
to raspberrypi/firmware
that referenced
this issue
Dec 15, 2020
popcornmix
added a commit
that referenced
this issue
Dec 15, 2020
|
This is fixed in the new new firmware. |
|
LGTM (pi3b). thank you for your quick correspondence. |
popcornmix
added a commit
to raspberrypi/firmware
that referenced
this issue
Dec 15, 2020
popcornmix
added a commit
that referenced
this issue
Dec 15, 2020
|
Probem with my various Pi now fixed, Thank you MrEngman |
mkreisl
added a commit
to xbianonpi/xbian-package-firmware
that referenced
this issue
Jan 12, 2021
- firmware: Unicam: Request frequency of 250MHz when running camera use cases - firmware: arm_loader: Fix UART unmapping - firmware: uart1: Revert to the old core-frequency-locking method See: #1267 - firmware: arm_loader: Provide a sensible device_tree_end default See: #1259 - firmware: mmal_ril: Fix size reported on ENOSPC error See: #1269 - firmware: hvs: Trigger the EOLn timer at the field rate when interlaced See: #1227 - firmware: bootloader_state: Add support for a custom TFTP prefix parameter - firmware: arm_loader: GIC stub => 2711 stu - See: #1255 - firmware: arm_loader: Add os_prefix option See: raspberrypi/linux#3237 - firmware: Add support for arbitrary memory specification - firmware: arm_loader: Fix explicit kernel name handling See: #1277 - firmware: Added a new display power mailbox call - firmware: Update display_power gencmd with optional display id See: raspberrypi/linux#3050 - firmware: Remove legacy pkgconfig to avoid Mesa conflicts See: raspberrypi/userland#585 - firmware: Update display_power gencmd with optional display id - firmware: sysman: Fix unsafe check for h264 being enabled See: popcornmix/omxplayer#749 - firmware: platform: Reduce absolute microvolts threshold to 500000 - firmware: tv_server: Also initialise ts queue on composite See: https://forum.kodi.tv/showthread.php?tid=348205 - firmware: Loop to init hotplug - firmware: hdmi: Change HDMI state machine and BVB clocks as turbo clocks - firmware: hdmi: Add EOF timeout to unjam failed mode changes - firmware: platform: Differentiate between boostable and turbo clocks - firmware: arm_dt: Set WL_ON and BT_ON from .dtb - firmware: Fixup chosing of bit depth in legacy graphics See: raspberrypi/linux#3331 - firmware: vec: Setup WideScreen Signalling outside of copy protection See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=256489 - firmware: Add global reset mailbox - firmware: 2711: De-couple start.elf clock setup from the bootloader - firmware: scaler: Correct defines for SCALER_POS0_START_Y_[MASK|SHIFT] (HVS4) - firmware: platform: Fix missing HDMI PHY power down bit - firmware: Reduce voltage as part of DVFS - firmware: arm-loader: Inherit 2711 mac-address from the bootloader See: http://git/vc4/vc4/merge_requests/687 - firmware: arm_loader: Respect all required frequencies when throttling - firmware: Fixup vcgencmd display_power return values - firmware: platform: Allow fixed voltage with avs_disable=1 - firmware: EMMC: Use PLLD for EMMC for 250MHz host-clock See: #1289 - firmware: platform: Round down effective frequencies when they exceed max See: #1290 - firmware: arm_loader: Pass video mode via kernel command for composite See: #1285 - firmware: Fix lens shading table generation buglet See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=190586&start=75#p1534672 - firmware: hdmi: Use RB2 timing for 2560x1440@60 if pixel clock is 241.5 MHz - firmware: arm_dt: Look for ethernet0 before ethernet - firmware: arm_dt: Set PCIe dma-ranges from memory size - firmware: hdmi: HDMI SM clock must not run slower than audio MAI clock See: #1295 - firmware: arm_loader: Pass video mode via kernel command for composite (master) See: #1285 - firmware: power: Use Pi4 PMIC values on Pi3+ - firmware: Fix filtered handling of array variables See: #1296 - firmware: Update libfdt to v1.5.1+ See: raspberrypi/userland#582 - firmware: dtoverlay: Extend DT parameter syntax - firmware: memorymap: Include FW revision in start.elf - firmware: Fixup for vcgencmd display_power See: #1224 - firmware: Add hdmi_wifi_pixel_freq_adj config option - firmware: Revert mmal: Support 64 bit clients See: raspberrypi/userland#586 - firmware: arm_dt/dtoverlay fixes for ARM side camera driver power control - firmware: arm_ldconfig: Support multiple initramfs files See: #1318 - firmware: Add support for backlight enable - firmware: master: arm_ldconfig: Support multiple initramfs files See: #1318 - firmware: power: Make pmicrd/pmicwr available to all - firmware: platform: Only throttle down from arm_freq - firmware: platform: Bump desired ring osc to 3.7 on Pi3/CM3 - firmware: arm_loader: Add 2ms delay before resetting SD_IO - firmware: isp/tuner: Resetting to a lamp mode cancels manual_gains_used_ - firmware: board_info: Fix uninitialised phy_addr handling in network boot - firmware: IL video_decode: Default to H264 as MPEG4 isn't supported - firmware: IL egl_render: Fail the create on Pi4 - firmware: arm_dispmanx: Column pitch for YUV10COL is in lines not bytes - firmware: platform: 2711: Also add chicken bits to dvfs voltage - firmware: MMAL / video_render: Allow column stride to be set on column formats - firmware: vc_image/video_decode: Move +16 lines for di_adv from vc_image to decoder - firmware: platform: 2711: Support overclocking gpu frequencies See: #1290 - firmware: gencmd: Fix measure_clock name for CLOCK_OUTPUT_108 - firmware: mmal isp: Remote alignment requirements for RGB24 formats - firmware: Add missing flags for VC_IMAGE_PROP_YUVUV_4K_CHROMA_ALIGN - firmware: platform: Compromise on gpu overclock settings See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=262649&start=100#p1610362 - firmware: Add the ability to export labels from overlays - firmware: loader: 4-byte align initramfs blocks See: #1318 - firmware: vd3/video_decode: Do not add 16 lines of context when video is 1920 tall See: #1334 - firmware: Allow use of 24 bit framebuffers See: #1338 - firmware: arm_loader: Add non-os_prefix cmdline.txt fallback - firmware: board_info: Set board-info memory size according to SDRAM mode registers - firmware: arm_loader: Treat min frequencies as optional See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=264786 - firmware: arm_loader: Add overvoltage_delta for manufacture tests - firmware: Support Isp stats and params - firmware: arm_loader: Make EMMC2 dma-ranges patch more tolerant - firmware: bootromfs: Delete unwanted assert - firmware: usb_eth: Increase timeouts for TFTP requests and retransmit ACK - firmware: isp component: rtos_common_mem: Fix handle acquire usage with wrap handles - firmware: il: video_render: Require 4k chroma alignment on YUVUV transpose See: #1334 - firmware: vc_image: Don't align the YUVUV pitch to SDRAM pages if not aligning to 4k See: raspberrypi/linux#3492 - firmware: isp component: rtos_common_mem: Fix smallalloc test in mem_handle_acquire_if_valid - firmware: platform: 2711: Make chicken-bit pip size vary with pmic quantum - firmware: USB device boot for CM4 - firmware: arm_loader: Add SET_LAUNCH_VPU1 mailbox message - firmware: il: camera: Add config.txt param awb_auto_is_greyworld for NoIR camera See: #1167 - firmware: arm_loader: Provisional support for high peris - firmware: arm_loader: Only add margins to cmdline if non-zero - firmware: clock: Support clock_measure_pll on pi0-3 - firmware: platform: Back to CLOCK_PLL_CHAN_CPER for emmc on pi0-3 - firmware: gpu_server: Fixup after LAUNCH_VPU1 commit - firmware: power: Add a notch to compensate for trim on 2835 - firmware: isp/tuner: Resetting to a lamp mode cancels manual_gains_used_ (master) - firmware: armstubs: Rebuild with latest source - firmware: arm_loader: Avoid resetting the GPIO expander - firmware: vcos_genversion: Fix up legacy variant names - firmware: dtoverlay: Add overlay_map functionality See: raspberrypi/linux#3520 - firmware: isp_tuner: Add in the slave AWB tuner handling - firmware: arm_dt: Apply os_prefix to device_tree= files - firmware: clock_2711: Fix PLL analog setup - firmware: board_info: Also include CM3+ for pmic trait See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=267576&start=25#p1643032 - firmware: Switch to building from common firmware branch - firmware: isp: make AGC metering respect the (digital zoom) crop region - firmware: Avoid linking in khronos on Pi4 - firmware: clock: Reset PLLC after switching VPU to OSC - firmware: arm_loader: Make 4GB available if arm_peri_high - firmware: arm_loader: Complete arm_peri_high support See: #1374 - firmware: board_info: Split Model B into rev1 and rev2 See: raspberrypi/linux#3537 - firmware: power: Clamp voltage to platform limits for all power supplies - firmware: isp: Ensure lens shading (LS) is enabled when a valid LS table is received - firmware: otp: Fix advanced boot row definition - firmware: bootcode: Fix issue booting with webcams - firmware: isp: fix ISP component to return non-zero focus FoMs - firmware: Fix for IMX477 focal length, f_number and aperture - firmware: Update firmware for USB MSD boot - firmware: platform: Fix overflow on high arm overclocks - firmware: video_encode: Add option to include header bytes with frame - firmware: DSI display: Close I2C handle if the display doesn't probe - firmware: mmal/vc: Add mapping for OMX_IndexConfigBufferStall / MMAL_PARAMETER_VIDEO_STALL_THRESHOLD See: https://www.raspberrypi.org/forums/viewtopic.php?f=70&t=273123&p=1655481 - firmware: hdmi: Request an I2C interrupt for EDID reading - firmware: i2c: Move using_interrupt flag into periph_setup - firmware: camera: Latency reduction for captures - firmware: IL camera fixes for reduced startup time - firmware: mmal_ril: Correct a use of portdef.video to portdef.image - firmware: vc_image: SDRAM page alignment is optional for YUV10_COL See: https://forum.libreelec.tv/thread/21985-noise-artefacts-when-playing-back-4k-hevc-video-on-rpi4-le-9-2-1-no-problems-on/ - firmware: imx477: Correct the logic for extending hblank on long exposures - firmware: il: isp: Ensure HR output is active and ISP is open before starting a frame - firmware: isp_ctrl: Fail in start_[raw|yuv]_frame if ISP is not idle See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=275489 - firmware: vcfw: Fix PMIC max voltage See: https://forum.libreelec.tv/thread/22097-libreelec-leia-9-2-3 - firmware: ISP raw14 and mono input, 16bpc YUV output. Camera subsystem not messing with GPIO0 - firmware: isp: fix assert from initial setting of ISP denoise parameters - firmware: arm_ldconfig: Don't pad initramfs files See: #1395 - firmware: board_info: Add and use BT_FLOWCONTROL trait - firmware: logging: Add missing checks for uart_output_enabled - firmware: host_applications: Install debug_sym.h - firmware: logging: Inherit uart_2ndstage config from the bootloader - firmware: Fix Pi4 regression in previous build - firmware: platform: Resolve BT flow control contention See: Hexxeh/rpi-firmware#227 - firmware: hdmi: Limit the valid CEA modes to those defined in the table See: https://forum.libreelec.tv/thread/22135-regression-raspberry-pi-3-hdmi-output-broken-after-upgrade-to-9-2-x - firmware: imx477: Add switch to allow switching of on-sensor DPC - firmware: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET See: https://forum.kodi.tv/showthread.php?tid=354589 - firmware: arm_ldconfig: Honour the kernel8 text offset See: #1415 - firmware: jpeghw: Skip repeated 0xFF padding bytes between markers See: RPi-Distro/vlc#8 - firmware: arm_loader: Allow interlaced HDMI modes from FKMS See: raspberrypi/linux#3698 - firmware: arm_loader: Limit rather than reject boosts with disable_auto_turbo - firmware: i2c: Clearing the TA bit may time out See: #1422 - firmware: arm_loader: Add an accelerated memmove - firmware: arm_loader: memmove kernel to preferred text_offset See: #1421 - firmware: filesystem: Fix GPT regression on USB after SD fix See: #1420 - firmware: arm_loader: Don't enable the ARM USB IRQ See: raspberrypi/linux#3703 - firmware: hdmi: Remove M2MC/BVB min turbo clock request - firmware: IL: camera: Fix stereoscopic pool allocations - firmware: arm_loader: Add support for double clock/pixel_rep for FKMS See: raspberrypi/linux#3725 - firmware: scalerlib: Set the default chroma location for YUV10 to match 8bit - firmware: scalerlib: Set chroma_vrep correctly for YUV10COL - firmware: isp: check the hi-res resize filter mode when the input crop changes - firmware: arm_loader: Knock 1.7 seconds off boot time See: #1375 - firmware: Imx477 external sync signals - firmware: bootloader: Some tweaks for LED, UART, USB timeouts - firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3 See: #1431 - firmware: arm_loader: Don't try to load to 0 a.k.a. NULL See: #1445 - firmware: armstub7: Configure the top 32 STB interrupts - firmware: dispmanx: Remove elements cleanly that are totally offscreen negatively See: raspberrypi/linux#3735 - firmware: hdmi: Set the altered mode, not the caller's mode See: #1446 - firmware: dt-blob: Declare CM4 GPIO expander pins - firmware: clocks: Make frequency_t 64-bit - firmware: Revert frequency_t: Make 64-bit - firmware: ISP/tuner: Increase max exposure time for fixed ISO modes on IMX219 and 477 See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=281603 - firmware: sdhost_arasan: Ignore DCRC after CMD12 See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=282928 - firmware: firmware: frequency_t: Make 64-bit - firmware: pi4: allow pllb changes while running See: #1431 - firmware: board_info: Give the CUSTOM boards the PMIC_NCP6343 trait - firmware: dispmanx/displays: Allow both DPI and DSI displays simultaneously - firmware: imx477: Release the I2C semaphore once finished, not before - firmware: clock: Allow overclocking pllb See: raspberrypi/linux#3823 - firmware: hdmi/edid: Reduce the bias to all but the first detailed timing - firmware: hdmi/edid: Add option to ignore any odd horizontal timings on Pi4 - firmware: sdcard: Hybrid MBR - only select GPT if it is the first primary partition See: #1465 - firmware: audioplus: Avoid broken audio when requesting hdmi audio device when using composite display See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=283639 - firmware: platform: Add support for SCB clock and set to 250MHz - firmware: Revert arm_loader: Move first call to set_turbo after arm->start - firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support - firmware: arm_ldconfig: Restore the fallback load address See: #1467 - firmware: ilcamera: Disable timeouts on trigger sink devices - firmware: genet: Flush RBUF/TBUF and clear mac-address on stop See: raspberrypi/linux#3850 - firmware: dmalib: Add support for 40-bit 2d memcpy - firmware: sdcard: Reduce SD read overhead - firmware: sdhost_arasan: Increase time threshold before suspend - firmware: video_decode: Only shutdown codec on both ports being disabled - firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer - firmware: arm_loader: Make arm clock accesses only see their own boosts See: #1469 - firmware: arm_loader: enable simple_fb iff there is a display See: raspberrypi/linux#3878 - firmware: arm_loader: Mark V3D early boost as for the ARM See: #1469 - firmware: arm_loader: Update armstubs with those from PR 117 See: raspberrypi/tools#117 - firmware: Revert sdcard: Reduce SD read overhead - firmware: arm_loader: Add GET/SET_VPU_VECTOR mailbox calls - firmware: arm_ldconfig: Don't invalidate the dcache for most of memory See: #1445 - firmware: arm_loader: Allow arm to see force_turbo and uart boosts - firmware: hdmi: Timeout HDMI EDID reads - firmware: pwm_sdm: move modulator to VPU0 See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=195178&p=1723639 - firmware: Add tryboot mechanism to provide a fallback if an OS upgrade fails - firmware: camplus: stills_denoise: Release the VRF between iterations - firmware: vc_image: Further fixup of fix_alignment See: #1334 - firmware: arm_loader: Support large PCIe window with <8GB RAM See: https://www.raspberrypi.org/forums/viewtopic.php?p=1759627#p1759627 - firmware: filesys: Close the brfs from filesys_power(..., 0) - firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3 See: #1431 - firmware: video_encode: Allow level 5.0 and 5.1 See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291447 - firmware: xhci: Don't reset BCM2711 XHCI from filesys in start.elf - firmware: bootcode.bin: Add support for tryboot - firmware: Switch DA9121 PMIC to PWM mode when ARM > 600 MHz - firmware: arm_dt: Handle parent interrupt controllers when masking - firmware: config: Add cm4 and pi400 config section filters - firmware: MMAL/IL/ISP component: Set the ISP boost frequency once on open - firmware: sdcard: Remove legacy NOOBS support to support booting from primary partition 4 - firmware: arm_loader: Move 2711 RAM to PCIe address 16GB - firmware: video_decode: Add parameter to disable timestamp validation - firmware: Imx477 camera tuning fixes See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291032#p1770287 See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291032&start=25#p1771066 - firmware: Use DMA40 for PWM audio - firmware: imx477: Replace existing 720p120 mode with a new 1332x990 120fps mode - firmware: arm_loader: Allow max_framebuffers=0 to disable framebuffers See: #1507 - firmware: dmalib: Allow sdcard to borrow channel 6 See: #1511 See: Hexxeh/rpi-firmware#251 See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=294932 - firmware: DSI interrupt fixes, and HDMI SM clock for deep colour - firmware: dmalib: Keep 40-bit DMA clear of L2 alias - firmware: audioplus: Fix hang when switching destination See: #1516 - firmware: HAT/I2C updates - firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats - firmware: Revert firmware: HAT/I2C updates - firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats - Firmware: undo previous reverts
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Running rpi-update and BRANCH=next rpi-update and only the Pi4 keep working, Pi4 4GB, Pi4 8GB and Pi400.
All other Pi, Pi0, Pi0W, Pi1B, Pi2B, Pi3A fail to boot.
Pi4 4GB and Pi400 with kernel 5.4.83 and Pi4 8GB with kernel 5.10.0 appear to be running OK.
Pi3A with kernel 5.10.0 and other Pi with kernel 5.4.83 all fail to boot.
Master commit 453e49b, BRANCH=next commit 6ac95f9
MrEngman
The text was updated successfully, but these errors were encountered: