- ESP32-S2 and ESP32-C3 Support
- Development Status
- Installation Instructions
- Decoding Exceptions
- Issue/Bug report template
- ESP32Dev Board PINMAP
If you want to test ESP32-S2 and/or ESP32-C3 through the board manager, please use the development release link: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json
and install the latest 2.0.0 version.
- Using Arduino IDE Boards Manager (preferred)
- Using Arduino IDE with the development repository
- Using PlatformIO
- Building with make
- Using as ESP-IDF component
- Using OTAWebUpdater
You can use EspExceptionDecoder to get meaningful call trace.
Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.
Finally, if you are sure no one else had the issue, follow the ISSUE_TEMPLATE while reporting any issue.
Sometimes to program ESP32 via serial you must keep GPIO0 LOW during the programming process