Skip to content

Tool to generate a PDF file showing the changes between two KiCad PCB/SCH files. Also a git plug-in.

License

Notifications You must be signed in to change notification settings

INTI-CMNB/KiDiff

Repository files navigation

KiDiff (kicad-diff or kicad_pcb-diff)

This program generates a PDF file showing the changes between two KiCad PCB or SCH files.

PCBs are plotted into PDF files, one for each layer. Then ImageMagick is used to compare the layers and PNG files are generated. The PNGs are finally assembled into one PDF file and the default PDF reader is invoked.

All the intermediate files are generated in the system temporal directory and removed as soon as the job is finished. You can cache the layers PDFs specifying a cache directory and keep the resulting diff images specifying an output directory.

For SCHs the process is similar, but using KiAuto. Note that one schematic is compared at a time. The --all_pages option allows comparing multiple pages. In this case adding or removing pages is only supported when the rsvg-convert tool is available. Also note that this can't be done by the git plug-in because git extracts only the file you want to compare. Consult the advanced use explanation.

The default resolution for the images is 150 DPI. It can be increased for better images, at the cost of (exponentially) longer execution times. You can provide a smaller resolution for faster processing. For high resolution you could need to configure the ImageMagick limits. Consult the 'identify -list resource' command.

Installation

Dependencies

In order to run the scripts you need:

  • Python 3.5 or newer
  • KiCad 5.1 or newer
  • Python3 wxWidgets (i.e. python3-wxgtk4.0). This is usually installed with KiCad.
  • ImageMagick tools (i.e. imagemagick Debian package). Used to manipulate images and create PDF files.
  • pdftoppm tool (i.e. poppler-utils Debian package). Used to decode PDF files.
    • Alternative: Ghostscript (slower and worst results)
  • rsvg-convert tool (i.e. librsvg2-bin Debian package). Needed to compare schematics with multiple pages. Converts SVG files to PNGs.
  • xdg-open tool (i.e. xdg-utils Debian package). Used to open the PDF viewer.
  • KiAuto. Used to print the schematic in PDF format.

In a Debian/Ubuntu system you'll first need to add this repo and then use:

$ sudo apt-get install kidiff`

Arch Linux can install kicad-pcb-diff using the AUR repository:

$ yay -S kidiff

Note: if you are using Debian, or some derived distro like Ubuntu, you can find a Debian package in the releases section. But using the repo is simpler.

Standalone use

  1. As root run:
# make install

The scripts will be copied to /usr/local/bin. If you want to install the scripts in /usr/bin run

# make prefix=/usr install

Note: if you are using Debian, or some derived distro like Ubuntu, you can find a Debian package in the releases section.

Docker image

You can find a docker image containing KiDiff and other KiCad tools here.

Git plug-in

  1. Install the scripts
  2. To initialize a repo just run the kicad_pcb-diff-init.py script from the root of the repo.
    This will configure the repo to read extra configuration from the .gitconfig file.
    It will also associate the kicad_pcb file extension with the kicad-git-diff.py script.
  3. The initialization script will create a list of layers to be excluded in the .kicad-git-diff file.
    Review this file and adjust it to your needs. Lines starting with # will be ignored.

Once configured the tool will be used every time you do a diff using git.

Temporarily disabling the git plug-in

Sometimes the graphics diff is not what you want. To disable it just invoke git diff using the --no-ext-diff option. It will force the text mode original diff behavior.

Disabling the pager

Git will use a pager to allow scrolling back and forth. This could be annoying because you must exit it, the git option --no-pager disables it. Example:

$ git --no-pager diff XXXXXX.kicad_pcb

PDF conversion policy

On some systems (i.e. Debian) ImageMagick disables PDF manipulation in its policy.xml configuration file. Comment or remove lines like this:

<policy domain="coder" rights="none" pattern="PDF" />

On Debian 11/12 this applies to the /etc/ImageMagick-6/policy.xml and/or /etc/ImageMagick-7/policy.xml file.

Usage

The kicad-git-diff.py is a plug-in for git so you just need to configure git and then it becomes transparent. If you need to create a diff between two files outside git you can use the kicad-diff.py script.

You have to provide the name of the two PCB/SCHs to be compared. The first is the old one, the reference, and the second is the new, the one you want to compare. The additional command line options are:

--help

Shows a detailed list of the available options.

--all_pages

Compare all pages for a schematic. Note that the tool doesn't currently support adding or removing sheets, both documents must have the same amount of pages.

--cache_dir

The PCB/SCH files are plotted to PDF files. One PDF file for layer. To avoid plotting them over and over you can specify a cache directory to store the PDFs.

--diff_mode

Selects the mechanism used to represent the differences:

  • red_green this is the default mode. Here we try to mimic the colored text mode diff tools. Things added to the old file are represented in green and things removed in red.
  • stats in this mode all difference are represented in red. We compute the amount of pixels that are different, you can use this value to determine if the changes are significant. See the --fuzz and --threshold options.

--exclude

Specifies the name of a file containing a list of layers to be excluded. Each line of the file is interpreted as a layer name. An example for this file could be:

B.Adhes
F.Adhes
Cmts.User
Eco1.User
Eco2.User
Edge.Cuts
Margin

You can also use the KiCad internal layer ID number. This will avoid warnings about undefined layer names.

Note that when using the git plug-in the script looks for a file named .kicad-git-diff at the root of the repo.

Using this you can reduce the time wasted computing diffs for empty or useless layers.

Note that lines starting with # are skipped.

See also --layers

--force_gs

KiDiff uses poppler utils if they are available. When they aren't KiDiff can use Ghostscript. The results using poppler are better and the process is faster, but you can choose to use Ghostscript using this option.

--fuzz

When comparing using the stats mode (see --diff_mode) this option controls how strict is the color comparison. The default is to tolerate 5 % of error in the colors. Enlarge it if you want to ignore bigger differences in the colors.

--keep_pngs

Don't remove the individual PNGs. Complements --output_dir. They are usually removed as soon as we get the output PDF.

--layers

Specifies the name of a file containing a list of layers to be included. This option works similar to --exclude but we process only the layers indicated here.

Important: when this list is only composed by layer numbers KiDiff skips any check and uses this list of layers, even if they aren't defined in any of the specified PCBs. Otherwise you can get warnings about names not defined.

--layers and --exclude are mutually exclusive.

--new_file_hash

This is the equivalent of the --old_file_hash option used for the new PCB/SCH file.

--no_reader

Use it to avoid invoking the default PDF viewer. Note that you should also provide an output directory using --output_dir.

The default PDF reader is invoked using xdg-open

--old_file_hash

The plotted PDF files for each layer are stored in the cache directory using a SHA1 of the PCB/SCH file as name for the directory. You can specify another hash here to identify the old PCB/SCH file.

The git plug-in uses the hash provided by git instead of the SHA1 for the file.

--output_dir

Five seconds after invoking the PDF viewer the output files are removed. If you want to keep them for later review, or five seconds isn't enough for your system, you can specify a directory to store the generated files.

Note: individual PNGs are always removed, consult --keep_pngs

--output_name

Used to complement --output_dir. The default name is diff.pdf

--resolution

The PDF files are converted to bitmaps to be compared. The default resolution for these bitmaps is 150 DPIs. This is a compromise between speed and legibility. For faster compares you can use a smaller resolution. For detailed comparison you can use a higher resolution. Be careful because the time is increased exponentially. You can also run out of resources. In particular ImageMagick defines some limits to the disk used for operations. These limits can be very low for default installations. You can consult the limits using the following command:

identify -list resource

Consult ImageMagick documentation in order to increase them.

--threshold

In the stats mode this option can make KiDiff to return an error value if the difference is bigger than the specified threshold. Indicating 0 means that we don't look for errors, KiDiff always returns 0.

-v/--verbose

Increases the level of verbosity. The default is a quite mode, specifying one level (-v) you'll get information messages about what's going on. If you increase the level to two (-vv) you'll get very detailed information, most probably useful only to debug problems.

--version

Print the script version, copyright and license.

Advanced use

kicad-diff.py can be run using the --only_cache option. In this mode the new_file argument can be the same as the old_file argument. This operation is used to store the images, but skip the comparison. In order to work you must specify a valid cache_dir. You should also take note of the hash used by kicad-diff.py, or just provide one using the --old_file_hash.

You can then compare two files using the cached images, you just need to provide the hashes you want to compare. The old_file and new_file won't be used.

Similar tools

KiCad-Diff

KiCad-Diff is a diff tool for PCBs, is more oriented to GUI use. It has support not only for git but also for fossil and svn. You can navigate the diffs and get information about added or removed items, all using a browser. And is fast (all is handled using SVGs).

It doesn't support schematics, can't be directly used as a git plug-in (perhaps using some wrapper), can't measure the ammout of difference and doesn't generate a file to see the differences (only browsable).

Credits and notes

  • This script is strongly based on Jesse Vincent work.
  • I borrowed the command to compare two images from Brecht Machiels. In particular from his diffpdf.sh tool.
  • I'm not a Python programmer, stackoverflow helps me ...

About

Tool to generate a PDF file showing the changes between two KiCad PCB/SCH files. Also a git plug-in.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published