Skip to content

The STM32 Connectivity Expansion Pack is an extension of the CMSIS-Pack standard established by Arm to support Wi-Fi and Bluetooth LE application on STM32 MCUs with Infineon Wireless Combo devices.Infineon STM32 Connectivity Expansion Pack

Notifications You must be signed in to change notification settings

Infineon/AIROC-Wi-Fi-Bluetooth-STM32

Repository files navigation

Infineon AIROC-Wi-Fi-Bluetooth-STM32 Expansion Pack 1.6.1

Overview

The Infineon AIROC-Wi-Fi-Bluetooth-STM32 Expansion Pack is an extension of the CMSIS-Pack standard established by Arm to support Wi-Fi and BLE application on STM32 MCUs with Infineon Wireless Combo devices.

This pack is MCU and flow-independent, meaning the user can choose the compiler toolchain and IDE, and adapt the source code to any STM microcontroller offering sufficient resources (serial interfaces and memory) and performance to run the application.

This pack uses libraries from the ModusToolbox environment. For more details, refer to https://www.cypress.com/products/modustoolbox.

You can select and configure the pack in the STM32CubeMX tool, make choices appropriate for your design, such as which CYW43xxx device to use, and then generate a project from your selection.

Infineon AIROC Wi-Fi/Bluetooth Combo chip support

AIROC Wi-Fi/BT Combo Wi-Fi 4/5/6/6E STM32H7xx STM32H5xx STM32U5xx STM32L5xx
CYW43012 Wi-Fi 5 check_ifx check_ifx check_ifx check_ifx
CYW43022 Wi-Fi 5 check_ifx check_ifx check_ifx check_ifx
CYW43439 Wi-Fi 4 check_ifx check_ifx check_ifx check_ifx
CYW4373/CYW4373E Wi-Fi 5 check_ifx check_ifx check_ifx check_ifx
CYW55513 Wi-Fi 6/6E check_ifx check_ifx check_ifx PENDING
CYW55572 Wi-Fi 6 check_ifx check_ifx PENDING PENDING

Dependencies

Wi-Fi application requires all the assets mentioned in the wifi group of expansion pack to be selected along with proper CYW43xxx selected in the Device dropbox in STM32CubeMX.

Expansion Pack Contents

The Infineon AIROC-Wi-Fi-Bluetooth-STM32 Expansion Pack uses below assets:

Asset Version
LwIP 2.1.2
abstraction-rtos 1.8.0
bluetooth-freertos 4.3.1
btstack 3.7.1
command-console 6.0.0
connectivity-utilities 4.4.0
core-lib 1.3.1
wcm 3.5.0
whd-bsp-integration 2.3.0
lwip-freertos-integration 1.0.0
lwip-network-interface-integration 1.3.1
netxduo-network-interface-integration 1.3.0
wifi-host-driver 4.1.0
wifi-mfg-test 3.3.0
secure-sockets 3.0.0
stm32_mw_freertos 10.4.6
wpa3-external-supplicant 1.1.0
aws-iot-device-sdk-port 2.3.0
aws-iot-device-sdk-embedded-C 202103
mqtt 4.3.0
PAL 1.6.1
Device 1.6.1

Additional details

The pack is compliant with the full CMSIS-Pack standard, with additional requirements/restrictions on the final pack to meet the STM standard.

Known issues

Refer to section 'Known issues/limitations' of Infineon AIROC-Wi-Fi-Bluetooth-STM32 expansion pack user guide.

More information


All other trademarks or registered trademarks referenced herein are the property of their respective owners.

Banner


© Cypress Semiconductor Corporation, 2021-2024.

About

The STM32 Connectivity Expansion Pack is an extension of the CMSIS-Pack standard established by Arm to support Wi-Fi and Bluetooth LE application on STM32 MCUs with Infineon Wireless Combo devices.Infineon STM32 Connectivity Expansion Pack

Topics

Resources

Stars

Watchers

Forks