tests/psoc6: Added board pin allocation and skip if module unavailable.

Signed-off-by: enriquezgarc <enriquezgarcia.external@infineon.com>

tests/psoc6/adc.py

@@ -2,10 +2,20 @@
 ADC test for the PSoC6 port.
 """
 
+import os
 from machine import ADC, Pin
 
-adc_pin = Pin("P10_0")
-adc_wrong_pin = Pin("P13_7")
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    adc_pin_name = "P10_0"
+    adc_wrong_pin_name = "P13_7"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+adc_pin = Pin(adc_pin_name)
+adc_wrong_pin = Pin(adc_wrong_pin_name)
 
 # Exceptions should be raised
 try:

tests/psoc6/adcblock.py

@@ -1,9 +1,18 @@
 """
 ADCBlock test for the PSoC6 port.
 """
+import os
 from machine import Pin, ADCBlock
 
-pin = Pin("P10_3")
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    pin_name = "P10_3"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+pin = Pin(pin_name)
 
 # Negative tests
 try:

tests/psoc6/i2c_hard.py

@@ -1,7 +1,17 @@
 ### I2C
+import os
 from machine import I2C
 
-i2c = I2C(id=0, scl="P6_0", sda="P6_1", freq=400000)
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    scl_pin = "P6_0"
+    sda_pin = "P6_1"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+i2c = I2C(id=0, scl=scl_pin, sda=sda_pin, freq=400000)
 print(i2c)
 
 print(i2c.scan())

tests/psoc6/i2c_soft.py

@@ -1,7 +1,17 @@
 #### SoftI2C
+import os
 from machine import SoftI2C
 
-si2c = SoftI2C(scl="P6_0", sda="P6_1", freq=400000)
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    scl_pin = "P6_0"
+    sda_pin = "P6_1"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+si2c = SoftI2C(scl=scl_pin, sda=sda_pin, freq=400000)
 print(si2c)
 
 print(si2c.scan())

tests/psoc6/multi/network.py

@@ -1,4 +1,10 @@
-import binascii, network, time
+import binascii, time
+
+try:
+    import network
+except ImportError:
+    print("SKIP")
+    raise SystemExit
 
 channel_default = 9
 channel_new = 5

tests/psoc6/multi/network_config.py

@@ -1,4 +1,10 @@
-import binascii, network, time
+import binascii, time
+
+try:
+    import network
+except ImportError:
+    print("SKIP")
+    raise SystemExit
 
 channel_new = 5
 ssid_new = "mpy-test-conf-wlan"

tests/psoc6/pin.py

@@ -1,11 +1,21 @@
+import os
 from machine import Pin
 import time
 import machine
 
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    pin1_name = "P13_7"
+    pin2_name = "P0_4"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
 # Tests for Output pin
 # Instantiate output pin for led operation
 # Constr
-p1 = Pin("P13_7")
+p1 = Pin(pin1_name)
 p1.init(Pin.OUT)
 print(p1)  # Pin:111 or P13_7, Mode=OUT, Pull=None, Value=1
 
@@ -20,7 +30,7 @@
 
 # Tests for Input pin
 # Instantiate input pin for button operation
-p2 = Pin("P0_4", Pin.IN)
+p2 = Pin(pin2_name, Pin.IN)
 print(p2)  # Pin:4 or P0_4, Mode=IN, Pull=None, Value=1
 p2.value()
 print(p2.value())  # 1 - button is released

tests/psoc6/pwm.py

@@ -1,7 +1,16 @@
 ### PWM
+import os
 from machine import PWM
 
-pwm = PWM("P12_0", freq=50, duty_u16=8192, invert=0)
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    pin_name = "P12_0"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+pwm = PWM(pin_name, freq=50, duty_u16=8192, invert=0)
 print(pwm)
 print(pwm.freq())
 print(pwm.duty_u16())

tests/psoc6/spi_soft.py

@@ -1,7 +1,18 @@
 #### SoftSPI
+import os
 from machine import SoftSPI
 
-spi = SoftSPI(baudrate=100000, polarity=1, phase=0, sck="P9_2", mosi="P9_0", miso="P9_1")
+# Allocate pin based on board
+machine = os.uname().machine
+if "CY8CPROTO-062-4343W" in machine:
+    sck_pin = "P9_2"
+    mosi_pin = "P9_0"
+    miso_pin = "P9_1"
+elif "CY8CPROTO-063-BLE" in machine:
+    print("SKIP")
+    raise SystemExit
+
+spi = SoftSPI(baudrate=100000, polarity=1, phase=0, sck=sck_pin, mosi=mosi_pin, miso=miso_pin)
 print(spi)
 spi.init(baudrate=200000)
 print(spi)