📝 Update Ender # labels

Infobitas · May 17, 2023 · 2be9f98 · 2be9f98
1 parent c2c1ff8
commit 2be9f98
Show file tree

Hide file tree

Showing 19 changed files with 30 additions and 30 deletions.
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
@@ -3149,7 +3149,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
 #endif
 
 /**
- * Ender 3 V2 controller has some limitations
+ * Ender-3 V2 controller has some limitations
  */
 #if ENABLED(DWIN_CREALITY_LCD)
   #if DISABLED(SDSUPPORT)

diff --git a/Marlin/src/lcd/e3v2/README.md b/Marlin/src/lcd/e3v2/README.md
@@ -1,6 +1,6 @@
-# DWIN for Creality Ender 3 v2
+# DWIN for Creality Ender-3 v2
 
-Marlin's Ender 3 v2 support requires the `DWIN_SET` included with the Ender 3 V2 [example configuration](https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x/config/examples/Creality/Ender-3%20V2).
+Marlin's Ender-3 v2 support requires the `DWIN_SET` included with the Ender-3 V2 [example configuration](https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x/config/examples/Creality/Ender-3%20V2).
 
 ## Easy Install
 

diff --git a/Marlin/src/lcd/e3v2/creality/dwin.cpp b/Marlin/src/lcd/e3v2/creality/dwin.cpp
@@ -2243,7 +2243,7 @@ void HMI_SelectFile() {
       card.openAndPrintFile(card.filename);
 
       #if HAS_FAN
-        // All fans on for Ender 3 v2 ?
+        // All fans on for Ender-3 v2 ?
         // The slicer should manage this for us.
         //for (uint8_t i = 0; i < FAN_COUNT; i++)
         //  thermalManager.fan_speed[i] = 255;

diff --git a/Marlin/src/lcd/e3v2/jyersui/README.md b/Marlin/src/lcd/e3v2/jyersui/README.md
@@ -1,6 +1,6 @@
-# DWIN for Creality Ender 3 v2
+# DWIN for Creality Ender-3 v2
 
-Marlin's Ender 3 v2 support requires the `DWIN_SET` included with the Ender 3 V2 [example configuration](https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x/config/examples/Creality/Ender-3%20V2).
+Marlin's Ender-3 v2 support requires the `DWIN_SET` included with the Ender-3 V2 [example configuration](https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x/config/examples/Creality/Ender-3%20V2).
 
 ## Easy Install
 

diff --git a/Marlin/src/lcd/e3v2/marlinui/ui_status_480x272.cpp b/Marlin/src/lcd/e3v2/marlinui/ui_status_480x272.cpp
@@ -262,7 +262,7 @@ FORCE_INLINE void _draw_feedrate_status(const char *value, uint16_t x, uint16_t
 }
 
 /**
- * Draw the MarlinUI Status Screen for Ender 3 V2
+ * Draw the MarlinUI Status Screen for Ender-3 V2
  */
 void MarlinUI::draw_status_screen() {
   const bool blink = get_blink();

diff --git a/Marlin/src/lcd/e3v2/proui/base64.hpp b/Marlin/src/lcd/e3v2/proui/base64.hpp
@@ -5,7 +5,7 @@
  * Author: Densaugeo
  * Maintainer: Densaugeo
  * Version: 1.2.1.1
- * Changed unsigned int to uint16_t for use in the professional Ender 3V2/S1 firmware
+ * Changed unsigned int to uint16_t for use in the professional Ender-3V2/S1 firmware
  * Url: https://www.arduino.cc/reference/en/libraries/base64/
  */
 

diff --git a/Marlin/src/libs/BL24CXX.h b/Marlin/src/libs/BL24CXX.h
@@ -23,7 +23,7 @@
 
 /********************************************************************************
  * @file     BL24CXX.h
- * @brief    i2c EEPROM for Ender 3 v2 board (4.2.2)
+ * @brief    i2c EEPROM for Ender-3 v2 board (4.2.2)
  ********************************************************************************/
 
 /******************** IIC ********************/

diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
@@ -211,7 +211,7 @@
   #endif
 
  /**
-  *          Ender 3 V2 display                       SKR E3 Turbo (EXP1)                Ender 3 V2 display --> SKR E3 Turbo
+  *          Ender-3 V2 display                       SKR E3 Turbo (EXP1)                Ender-3 V2 display --> SKR E3 Turbo
   *                ------                                     ------                                  RX  3 -->  5  P0_15
   *           --  | 1  2 | --                (BEEPER)  P2_08 |10  9 | P0_16 (BTN_ENC)                 TX  4 -->  9  P0_16
   * (SKR_TX1) RX  | 3  4 | TX (SKR_RX1)      (BTN_EN1) P0_19 | 8  7 | RESET                       BEEPER  6 --> 10  P2_08

diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
@@ -203,10 +203,10 @@
  * This section starts with the pins_RAMPS_144.h as example, after if you need any new
  * display, you could use normal duponts and connect it with with the scheme showed before.
  * Tested:
- *   - Ender 3 Old display (Character LCD)
- *   - Ender 3 New Serial DWING Display
+ *   - Ender-3 Old display (Character LCD)
+ *   - Ender-3 New Serial DWING Display
  *   - Reprap Display
- *   - Ender 5 New Serial Display
+ *   - Ender-5 New Serial Display
  *   - Any Reprap character display like
  */
 

diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
@@ -255,10 +255,10 @@
  * This sections starts with the pins_RAMPS_144.h as example, after if you need any new
  * display, you could use normal duponts and connect it with with the scheme showed before.
  * Tested:
- *   - Ender 3 Old display (Character LCD)
- *   - Ender 3 New Serial DWING Display
+ *   - Ender-3 Old display (Character LCD)
+ *   - Ender-3 New Serial DWING Display
  *   - Reprap Display
- *   - Ender 5 New Serial Display
+ *   - Ender-5 New Serial Display
  *   - Any Reprap character display like
  */
 

diff --git a/Marlin/src/pins/samd/pins_MINITRONICS20.h b/Marlin/src/pins/samd/pins_MINITRONICS20.h
@@ -174,10 +174,10 @@
  * This sections starts with the pins_RAMPS_144.h as example, after if you need any new
  * display, you could use normal duponts and connect it with with the scheme showed before.
  * Tested:
- *   - Ender 3 Old display (Character LCD)
- *   - Ender 3 New Serial DWING Display
+ *   - Ender-3 Old display (Character LCD)
+ *   - Ender-3 New Serial DWING Display
  *   - Reprap Display
- *   - Ender 5 New Serial Display
+ *   - Ender-5 New Serial Display
  *   - Any Reprap character display like
  */
 

diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1.h
@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * Creality v2.4.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender 7
+ * Creality v2.4.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender-7
  */
 
 #define BOARD_INFO_NAME      "Creality v2.4.S1 V101"

diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h
@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * Creality V24S1_301 (STM32F103RE / STM32F103RC) board pin assignments as found on Ender 3 S1.
+ * Creality V24S1_301 (STM32F103RE / STM32F103RC) board pin assignments as found on Ender-3 S1.
  * Also supports the STM32F4 version of the board with identical pin mapping.
  */
 
@@ -40,7 +40,7 @@
   #define BOARD_INFO_NAME      "Creality V24S1-301"
 #endif
 #ifndef DEFAULT_MACHINE_NAME
-  #define DEFAULT_MACHINE_NAME "Ender 3 S1"
+  #define DEFAULT_MACHINE_NAME "Ender-3 S1"
 #endif
 
 //

diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
@@ -35,7 +35,7 @@
   #define BOARD_INFO_NAME      "Creality V4"
 #endif
 #ifndef DEFAULT_MACHINE_NAME
-  #define DEFAULT_MACHINE_NAME "Ender 3 V2"
+  #define DEFAULT_MACHINE_NAME "Ender-3 V2"
 #endif
 
 #define BOARD_NO_NATIVE_USB

diff --git a/Marlin/src/pins/stm32f4/pins_CREALITY_V24S1_301F4.h b/Marlin/src/pins/stm32f4/pins_CREALITY_V24S1_301F4.h
@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * Creality V24S1_301F4 (STM32F401RC) board pin assignments as found on Ender 3 S1.
+ * Creality V24S1_301F4 (STM32F401RC) board pin assignments as found on Ender-3 S1.
  */
 
 #ifndef BOARD_INFO_NAME

diff --git a/buildroot/share/dwin/bin/README.md b/buildroot/share/dwin/bin/README.md
@@ -4,7 +4,7 @@ Tools for processing `.ICO` files used by DWIN displays.
 
 ## Introduction
 
-The DWIN LCDs that come with the Creality Ender 3 v2 and other 3D printers contain image and container files stored on them which are used to draw various the UI elements.
+The DWIN LCDs that come with the Creality Ender-3 v2 and other 3D printers contain image and container files stored on them which are used to draw various the UI elements.
 
 Standard `.JPG` files can be installed for things like the boot screen, and `.ICO` files can contain several images within a structured file format.
 

diff --git a/buildroot/tests/STM32F103RE_creality b/buildroot/tests/STM32F103RE_creality
@@ -11,12 +11,12 @@ set -e
 #
 use_example_configs "Creality/Ender-3 V2/CrealityV422/CrealityUI"
 opt_enable MARLIN_DEV_MODE BUFFER_MONITORING BLTOUCH AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
-exec_test $1 $2 "Ender 3 v2 with CrealityUI" "$3"
+exec_test $1 $2 "Ender-3 v2 with CrealityUI" "$3"
 
 use_example_configs "Creality/Ender-3 V2/CrealityV422/CrealityUI"
 opt_disable DWIN_CREALITY_LCD
 opt_enable DWIN_CREALITY_LCD_JYERSUI AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
-exec_test $1 $2 "Ender 3 v2 with JyersUI" "$3"
+exec_test $1 $2 "Ender-3 v2 with JyersUI" "$3"
 
 use_example_configs "Creality/Ender-3 S1/STM32F1"
 opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT

diff --git a/buildroot/tests/STM32F401RC_creality b/buildroot/tests/STM32F401RC_creality
@@ -9,7 +9,7 @@ set -e
 use_example_configs "Creality/Ender-3 V2/CrealityV422/MarlinUI"
 opt_add SDCARD_EEPROM_EMULATION AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
 opt_set MOTHERBOARD BOARD_CREALITY_V24S1_301F4
-exec_test $1 $2 "Ender 3 v2 with MarlinUI" "$3"
+exec_test $1 $2 "Ender-3 v2 with MarlinUI" "$3"
 
 # clean up
 restore_configs
diff --git a/buildroot/tests/melzi_optiboot b/buildroot/tests/melzi_optiboot
@@ -7,10 +7,10 @@
 set -e
 
 #
-# Ender 2
+# Ender-2
 #
 use_example_configs Creality/Ender-2
-exec_test $1 $2 "Ender 2" "$3"
+exec_test $1 $2 "Ender-2" "$3"
 
 # clean up
 restore_configs