🧑‍💻 Status Message cleanup

Infobitas · May 17, 2023 · d2e84e8 · d2e84e8
1 parent 3340491
commit d2e84e8
Show file tree

Hide file tree

Showing 9 changed files with 43 additions and 40 deletions.
diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp
@@ -979,10 +979,10 @@ bool MMU2::eject_filament(const uint8_t index, const bool recover) {
   manage_response(false, false);
 
   if (recover)  {
-    LCD_MESSAGE(MSG_MMU2_EJECT_RECOVER);
+    LCD_MESSAGE(MSG_MMU2_REMOVE_AND_CLICK);
     mmu2_attn_buzz();
-    TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, F("MMU2 Eject Recover"), FPSTR(CONTINUE_STR)));
-    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(F("MMU2 Eject Recover")));
+    TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, GET_TEXT_F(MSG_MMU2_EJECT_RECOVER), FPSTR(CONTINUE_STR)));
+    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_MMU2_EJECT_RECOVER)));
     TERN_(HAS_RESUME_CONTINUE, wait_for_user_response());
     mmu2_attn_buzz(true);
 

diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
@@ -201,7 +201,7 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
     KEEPALIVE_STATE(PAUSED_FOR_USER);
     wait_for_user = true;    // LCD click or M108 will clear this
 
-    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(F("Load Filament")));
+    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENTLOAD)));
 
     #if ENABLED(HOST_PROMPT_SUPPORT)
       const char tool = '0' + TERN0(MULTI_FILAMENT_SENSOR, active_extruder);
@@ -460,7 +460,7 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
 
   // If axes don't need to home then the nozzle can park
   if (do_park) nozzle.park(0, park_point); // Park the nozzle by doing a Minimum Z Raise followed by an XY Move
-  TERN_(DWIN_LCD_PROUI, if (!do_park) ui.set_status(GET_TEXT_F(MSG_PARK_FAILED)));
+  if (!do_park) LCD_MESSAGE(MSG_PARK_FAILED);
 
   #if ENABLED(DUAL_X_CARRIAGE)
     const int8_t saved_ext        = active_extruder;
@@ -549,9 +549,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
 
       TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_INFO, GET_TEXT_F(MSG_REHEATING)));
 
-      TERN_(EXTENSIBLE_UI, ExtUI::onStatusChanged(GET_TEXT_F(MSG_REHEATING)));
-
-      TERN_(DWIN_LCD_PROUI, LCD_MESSAGE(MSG_REHEATING));
+      LCD_MESSAGE(MSG_REHEATING);
 
       // Re-enable the heaters if they timed out
       HOTEND_LOOP() thermalManager.reset_hotend_idle_timer(e);
@@ -568,8 +566,11 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
       HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
 
       TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, GET_TEXT_F(MSG_REHEATDONE), FPSTR(CONTINUE_STR)));
-      TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_REHEATDONE)));
-      TERN_(DWIN_LCD_PROUI, LCD_MESSAGE(MSG_REHEATDONE));
+      #if ENABLED(EXTENSIBLE_UI)
+        ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_REHEATDONE));
+      #else
+        LCD_MESSAGE(MSG_REHEATDONE);
+      #endif
 
       IF_DISABLED(PAUSE_REHEAT_FAST_RESUME, wait_for_user = true);
 

diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp
@@ -162,8 +162,8 @@ float g26_random_deviation = 0.0;
    */
   bool user_canceled() {
     if (!ui.button_pressed()) return false; // Return if the button isn't pressed
-    ui.set_status(GET_TEXT_F(MSG_G26_CANCELED), 99);
-    TERN_(HAS_MARLINUI_MENU, ui.quick_feedback());
+    LCD_MESSAGE_MAX(MSG_G26_CANCELED);
+    ui.quick_feedback();
     ui.wait_for_release();
     return true;
   }
@@ -321,11 +321,9 @@ typedef struct {
     #if HAS_HEATED_BED
 
       if (bed_temp > 25) {
-        #if HAS_WIRED_LCD
-          ui.set_status(GET_TEXT_F(MSG_G26_HEATING_BED), 99);
-          ui.quick_feedback();
-          TERN_(HAS_MARLINUI_MENU, ui.capture());
-        #endif
+        LCD_MESSAGE_MAX(MSG_G26_HEATING_BED);
+        ui.quick_feedback();
+        TERN_(HAS_MARLINUI_MENU, ui.capture());
         thermalManager.setTargetBed(bed_temp);
 
         // Wait for the temperature to stabilize
@@ -340,20 +338,16 @@ typedef struct {
     #endif // HAS_HEATED_BED
 
     // Start heating the active nozzle
-    #if HAS_WIRED_LCD
-      ui.set_status(GET_TEXT_F(MSG_G26_HEATING_NOZZLE), 99);
-      ui.quick_feedback();
-    #endif
+    LCD_MESSAGE_MAX(MSG_G26_HEATING_NOZZLE);
+    ui.quick_feedback();
     thermalManager.setTargetHotend(hotend_temp, active_extruder);
 
     // Wait for the temperature to stabilize
     if (!thermalManager.wait_for_hotend(active_extruder, true OPTARG(G26_CLICK_CAN_CANCEL, true)))
       return G26_ERR;
 
-    #if HAS_WIRED_LCD
-      ui.reset_status();
-      ui.quick_feedback();
-    #endif
+    ui.reset_status();
+    ui.completion_feedback();
 
     return G26_OK;
   }
@@ -371,7 +365,7 @@ typedef struct {
 
       if (prime_flag == -1) {  // The user wants to control how much filament gets purged
         ui.capture();
-        ui.set_status(GET_TEXT_F(MSG_G26_MANUAL_PRIME), 99);
+        LCD_MESSAGE_MAX(MSG_G26_MANUAL_PRIME);
         ui.chirp();
 
         destination = current_position;
@@ -398,17 +392,15 @@ typedef struct {
 
         ui.wait_for_release();
 
-        ui.set_status(GET_TEXT_F(MSG_G26_PRIME_DONE), 99);
+        LCD_MESSAGE_MAX(MSG_G26_PRIME_DONE);
         ui.quick_feedback();
         ui.release();
       }
       else
     #endif
     {
-      #if HAS_WIRED_LCD
-        ui.set_status(GET_TEXT_F(MSG_G26_FIXED_LENGTH), 99);
-        ui.quick_feedback();
-      #endif
+      LCD_MESSAGE_MAX(MSG_G26_FIXED_LENGTH);
+      ui.quick_feedback();
       destination = current_position;
       destination.e += prime_length;
       prepare_internal_move_to_destination(fr_slow_e);
@@ -853,7 +845,7 @@ void GcodeSuite::G26() {
   } while (--g26_repeats && location.valid());
 
   LEAVE:
-  ui.set_status(GET_TEXT_F(MSG_G26_LEAVING), -1);
+  LCD_MESSAGE_MIN(MSG_G26_LEAVING);
   TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(location, ExtUI::G26_FINISH));
 
   g26.retract_filament(destination);

diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp
@@ -84,7 +84,7 @@ void GcodeSuite::M48() {
   };
 
   if (!probe.can_reach(test_position)) {
-    ui.set_status(GET_TEXT_F(MSG_M48_OUT_OF_BOUNDS), 99);
+    LCD_MESSAGE_MAX(MSG_M48_OUT_OF_BOUNDS);
     SERIAL_ECHOLNPGM("? (X,Y) out of bounds.");
     return;
   }

diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
@@ -629,6 +629,7 @@ namespace Language_en {
   LSTR MSG_CHAMBER_COOLING                = _UxGT("Chamber Cooling...");
   LSTR MSG_LASER_COOLING                  = _UxGT("Laser Cooling...");
   LSTR MSG_DELTA_CALIBRATE                = _UxGT("Delta Calibration");
+  LSTR MSG_DELTA_CALIBRATION_IN_PROGRESS  = _UxGT("Delta Calibration in progress");
   LSTR MSG_DELTA_CALIBRATE_X              = _UxGT("Calibrate X");
   LSTR MSG_DELTA_CALIBRATE_Y              = _UxGT("Calibrate Y");
   LSTR MSG_DELTA_CALIBRATE_Z              = _UxGT("Calibrate Z");
@@ -739,7 +740,8 @@ namespace Language_en {
   LSTR MSG_MMU2_FILAMENT_N                = _UxGT("Filament ~");
   LSTR MSG_MMU2_RESET                     = _UxGT("Reset MMU");
   LSTR MSG_MMU2_RESETTING                 = _UxGT("MMU Resetting...");
-  LSTR MSG_MMU2_EJECT_RECOVER             = _UxGT("Remove, click");
+  LSTR MSG_MMU2_EJECT_RECOVER             = _UxGT("MMU2 Eject Recover");
+  LSTR MSG_MMU2_REMOVE_AND_CLICK          = _UxGT("Remove and click...");
 
   LSTR MSG_MIX                            = _UxGT("Mix");
   LSTR MSG_MIX_COMPONENT_N                = _UxGT("Component =");

diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp
@@ -666,7 +666,7 @@ void MarlinUI::init() {
     #if HAS_MARLINUI_MENU
       if (use_click()) {
         #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
-          next_filament_display = millis() + 5000UL;  // Show status message for 5s
+          pause_filament_display();
         #endif
         goto_screen(menu_main);
         reinit_lcd(); // Revive a noisy shared SPI LCD
@@ -1581,7 +1581,7 @@ void MarlinUI::init() {
       #endif
 
       #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
-        next_filament_display = ms + 5000UL; // Show status message for 5s
+        pause_filament_display(ms); // Show status message for 5s
       #endif
 
     #endif

diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
@@ -467,6 +467,7 @@ class MarlinUI {
 
       #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
         static millis_t next_filament_display;
+        static void pause_filament_display(const millis_t ms=millis()) { next_filament_display = ms + 5000UL; }
       #endif
 
       #if HAS_TOUCH_SLEEP
@@ -491,6 +492,11 @@ class MarlinUI {
 
       static void status_screen();
 
+    #else
+
+      static void quick_feedback(const bool=true) {}
+      static void completion_feedback(const bool=true) {}
+
     #endif
 
     #if HAS_MARLINUI_U8GLIB
@@ -801,5 +807,7 @@ class MarlinUI {
 
 #define LCD_MESSAGE_F(S)       ui.set_status(F(S))
 #define LCD_MESSAGE(M)         ui.set_status(GET_TEXT_F(M))
+#define LCD_MESSAGE_MIN(M)     ui.set_status(GET_TEXT_F(M), -1)
+#define LCD_MESSAGE_MAX(M)     ui.set_status(GET_TEXT_F(M), 99)
 #define LCD_ALERTMESSAGE_F(S)  ui.set_alert_status(F(S))
 #define LCD_ALERTMESSAGE(M)    ui.set_alert_status(GET_TEXT_F(M))
diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@@ -68,8 +68,8 @@ void _man_probe_pt(const xy_pos_t &xy) {
   float lcd_probe_pt(const xy_pos_t &xy) {
     _man_probe_pt(xy);
     ui.defer_status_screen();
-    TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, F("Delta Calibration in progress"), FPSTR(CONTINUE_STR)));
-    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(F("Delta Calibration in progress")));
+    TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_do(PROMPT_USER_CONTINUE, GET_TEXT_F(MSG_DELTA_CALIBRATION_IN_PROGRESS), FPSTR(CONTINUE_STR)));
+    TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_DELTA_CALIBRATION_IN_PROGRESS)));
     TERN_(HAS_RESUME_CONTINUE, wait_for_user_response());
     ui.goto_previous_screen_no_defer();
     return current_position.z;

diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
@@ -1685,7 +1685,7 @@ void MarlinSettings::postprocess() {
         stored_ver[1] = '\0';
       }
       DEBUG_ECHO_MSG("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
-      TERN_(DWIN_LCD_PROUI, LCD_MESSAGE(MSG_ERR_EEPROM_VERSION));
+      LCD_MESSAGE(MSG_ERR_EEPROM_VERSION);
       TERN_(HOST_PROMPT_SUPPORT, hostui.notify(GET_TEXT_F(MSG_ERR_EEPROM_VERSION)));
 
       IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_version());
@@ -2631,7 +2631,7 @@ void MarlinSettings::postprocess() {
       else if (working_crc != stored_crc) {
         eeprom_error = true;
         DEBUG_ERROR_MSG("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
-        TERN_(DWIN_LCD_PROUI, LCD_MESSAGE(MSG_ERR_EEPROM_CRC));
+        LCD_MESSAGE(MSG_ERR_EEPROM_CRC);
         TERN_(HOST_EEPROM_CHITCHAT, hostui.notify(GET_TEXT_F(MSG_ERR_EEPROM_CRC)));
         IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_crc());
       }