Skip to content

JockeTF/fimfarchive

Repository files navigation

Fimfarchive

Fimfarchive aims to release all stories on Fimfiction as a single ZIP-file. The archive contains not only stories, but also metadata such as tags, ratings, and descriptions. It is organized by author and could be used for backup, offline reading, or data mining.

Releases can be found on Fimfarchive's user profile at Fimfiction. Note that this is not an official Fimfiction project, so do not send questions to Fimfiction staff. Instead, send a private message or post a comment to the Fimfarchive user profile.

A new version will be released each season via BitTorrent, approximately once every three months. When suitable, an xdelta3 patch will also be provided for users who do not wish to redownload unchanged stories.

Note that the archive contains a large number of files. Unzipping it to your file system may not be necessary if the archive is to be used together with some application. If you are a developer, reading directly from the ZIP-file may be preferable.

This repository contains code for updating and building the archive. While the API is not guaranteed to be stable, it can also be used as a library for easy access to stories and metadata within the archive. A Fimfiction API key is however needed to stories directly from Fimfiction.

Installation

There are primarily two ways to install this tool. The first is installation as a library for use within other projects, and the second is installation for development of Fimfarchive. Using a virtual environment is recommended for both cases in order to avoid contaminating the rest of the Python installation.

Installation as a Library

Make sure a virtual environment has been created and activated. When done, simply install the library directly from the master branch on GitHub.

python3 -m pip install git+https://github.com/JockeTF/fimfarchive.git

Optionally also install lz4 to lower the memory footprint of open archives.

python3 -m pip install lz4

That's it! Import a class to make sure things work as expected.

from fimfarchive.fetchers import FimfarchiveFetcher

Installation for Development

Start by creating a clone of the Fimfarchive repository.

git clone https://github.com/JockeTF/fimfarchive.git

Enter the cloned repository and install the development dependencies.

uv sync

Optionally also install lz4 to lower the memory footprint of open archives.

uv sync --extra lz4

All done! Run the test suite to make sure everything works as expected.

uv run pytest

Running

Fimfarchive has a command line interface which is invoked as a Python module. It can't do much except prepare new Fimfarchive releases. For archive browsing you will need to use third-party tools, or make your own.

$ uv run python -m fimfarchive
Usage: COMMAND [PARAMETERS]

Fimfarchive, ensuring that history is preseved.

Commands:
  build   Builds a new Fimfarchive release.
  update  Updates stories for Fimfarchive.

The command line interface features multiple subcommands, each with its own brief help text. The subcommand is specified as the second program argument.

$ uv run python -m fimfarchive update --help
usage: [-h] [--alpha] --archive PATH [--refetch]

Updates stories for Fimfarchive.

optional arguments:
  -h, --help      show this help message and exit
  --alpha         fetch from Fimfiction APIv1
  --archive PATH  previous version of the archive
  --refetch       refetch all available stories

Some commands (such as update) require a Fimfiction API key. The program reads this key from the environment variable FIMFICTION_ACCESS_TOKEN. Any data downloaded from Fimfiction is stored in the current working directory, typically in the worktree subdirectory. The same thing goes for rendered stories, built archives, or anything else related to the release process.

Process

The process for building a new Fimfarchive release consists of a few simple steps. Before starting, make sure you have the previous version of Fimfarchive nearby, as well as a Fimfiction APIv2 key. Also, remove any previous worktree directory from the current working directory. Some of the commands mentioned below are currently only available in feature branches.

  • Update: Invoke the update subcommand to refresh all stories. This takes about one month since all story metadata has to be traversed. Story data isn't downloaded unless changes have been made since the last release. Use the --refetch flag if all data should be updated regardless of if there have been any changes. Write down the Started and Done dates for later.

  • Render: Use the render subcommand to generate EPUB-files for all stories with updated content. The subcommand requires ebook-convert from Calibre to be installed and accessible from the command line. Fimfarchive will usually keep the CPU maxed out for a few hours during this step.

  • Count: The count subcommand compares the upcoming release with the previous one. The output mainly consists of statistics for the changelog.

  • Document: Update the documentation in docs/readme.tex for the upcoming release. Change the document title, add a row to the changelog table, and a new changelog subsection. Render the document a few times with lualatex and place the results in worktree/extras as readme.pdf.

  • About: Create an about.json file in worktree/extras. The file has three keys named version, start, and end. Each key has a simple date string like 20201201 as its value. Preferably use the file included with the previous release as a template to keep things consistent.

  • Build: Create a build directory in worktree, and then run the build subcommand. Expect this to take up to 15 minutes depending on the machine. The resulting archive will be written to the build directory.

  • Verify: Go through the archive to check that everything looks good. One tip is to test the CRC checksums of both the outer ZIP-archive and internal EPUB-files. Sample some old and new stories to check that they look right. Successfully opening the archive with Fimfareader can help prove that the metadata has all of the required fields with the correct data types.

  • Patch: Create an xdelta3 patch if applicable. It's important to allow xdelta3 to use a lot of memory since it otherwise has trouble seeing the similarities between the archives. For example, xdelta3 -B 2147483648 -e -s <old> <new> <patch> uses the maximum allowed value of 2 GiB.

  • Torrent: Create a torrent file if applicable. Using a private tracker with a whitelist is preferable since public ones could be flaky or have poor response times. However, it's usually a good idea to include a few public trackers as well to improve availability. Set the chunk size so that the torrent is split into somewhere between 1000 and 2000 pieces. Values outside that range could cause performance issues or prevent the torrent from being easily distributed via magnet links.

  • Release: Upload, announce, and distribute the release!

Releases

No releases published

Packages

No packages published

Languages