Supermicro-Nuvoton-WPCM450-IPMI

Supermicro Nuvoton®, formerly known as Winbond® WPCM450 IPMI source code

Supermicros's / American Megatrends IPMI source tree taken from https://www.supermicro.com/wftp/GPL/AMI/SMC_winbond_opensrc_10090602.tar.gz This code covers the IPMI/BMC part of Supermicro motherboards, using the WPCM450 BMC as well as ARM926EJS ARM CPU. Providing support for HERMON board, using

#--------------- OEM VERSION OF BUILDPROJECT ----------------------

This is a strip down version of BuildProject to run as standalone

All access to Source control is removed and functions which wipe

entire source trees are removed.

#------------------------------------------------------------------

Uncomment for Script debugging

#set -e

########################################################################

Build script Version:

Whenever th script changes, Major.Minor is incremented

by .1 and subminor is reset to 0

Subminor is incremented when any of the configuration values

changes and the script is not modified.

BuildImage script's VERSION numbering is as follows:

x.y.z:

x - Major change

y - Script change

z - Devkit change

#########################################################################

SCRIPT_DATE="10/25/2007" # Build Script Modification Date SCRIPT_VERS="2.4.0" # Build Script Version

-Due to lack of information we tried the following things out.

[2.4.0] - 2020-10-25

Tested

Debian 4 i386 build required. -Build basic default image, using ./BuildProject.oem winbond BUILD ./ -Add new uboot version, using git clone and replace "Makefile, mkconfig" by the old ones, maybe use "make olddefconfig" in order to write new .config -Build image using ./genimage -Crom.ima -I/root/winbond/Build/Output -O/root/winbond/Build/Output

In order to provide further support, we'll try to port this version to be able to compile on a newer system. Currently it's only possible to get a successful build on Debian 4 (i386).

Outputs might be quite confusing, so in case of a successfull build, you will get a similar output like this one.

Creating "/root/winbond.successful//Build/Output/rom.ima" ... FlashSize = 0x1000000 BlockSize = 0x10000 boot: Alternate location @ 0xff80 FileSize = 0x1000000 Image checksum is 0xBA92402F Flash Image created Successfully!

---

         Flash Memory Map

---

0x0000000 - 0x0050000 : boot : Ver 1.0 0x0050000 - 0x0150000 : params : Ver 1.0 0x0150000 - 0x0160000 : FREE 0x0160000 - 0x0750000 : root : Ver 1.0 0x0750000 - 0x0D00000 : FREE 0x0D00000 - 0x0E50000 : osimage : Ver 1.0 0x0E50000 - 0x0E70000 : www : Ver 1.0 0x0E70000 - 0x0FF0000 : FREE 0x0FF0000 - 0x1000000 : hermon : Ver 1.1

---

/root/winbond.successful//Build/Output/rom.ima created

---