-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
IKEA TRADFRI remote control, color temperature not working #1232
Comments
No, not yet, I don't want do use the remote in zigbee2mqtt so I thought that wouldn't be necessary |
@Koenkk I am having a similar issue. I have followed the cc sniffer guidance and bound the switch to a light fitting with three bulbs. The on/off switch and brightness work flawlessly but the change colour buttons do not change colour temperature like they used to when using the tradfri hub. |
I noticed that the normal IKEA panel supports only 3 different color temperatures... With zigbee2mqtt I can set more than that! Maybe the firmware of the panel gets in an unknown state or something?! |
I've just checked and indeed setting colour temperature is not possible using this method. Perhaps some extra setup is done, need to do some more sniffing.. |
I have just paired a second remote to a full colour tradfri bulb. Set up went well and it integrates well with home assistant but the arrow buttons do not change colour with this bulb too |
In my environment the IKEA remote control works very well with the IKEA bulbs, inclusive setting of the color temperature. What I've done
zigbee2mqtt version 1.2.1 (commit #e5ca977) Great Job! |
@didiht |
@ripperle I made following test:
With the 'bind' feature I had no success to set the color_temperature with the IKEA remote previously, but I didin't test this with the current version. |
@didiht Can I help doing some sniffing? When I press the arrow buttons on the IKEA remote control I receive the following message in Wireshark:
zigbee2mqtt version 1.2.1 (commit #e5ca977) |
@bjobo I also sniffed an arrow-left-click and identified two frames:
Maybe that helps. If I can do any further investigation just tell me. |
@ripperle @bjobo But following procedure leads in my environment to the expected functionality:
It seems there is a (small?) difference of the initial states (reset with powercycle, reset by pairing and removing from IKEA bridge) that leads to the variance of functionality. @Koenkk |
So it seems the tradfri hub does some special setup, could you sniff the zigbee traffic when pairing it to the hub? http://www.zigbee2mqtt.io/how_tos/how_to_sniff_zigbee_traffic.html |
@didiht |
@Koenkk |
@didiht
|
@didiht could you upload it here? |
Hi, Is there an Solution without Tradfri Bridge? Devices are LED1624G9 and LED1546G12. coordinator_firmware 20190223 Zigbee2MQTT version1.3.1 After reset the bulbs and tradfri remote After adding the bulbs to Tradfri remotes group, even no luck. Same sniffer output like #1232 (comment) On/Off and brightness on Tradfri remotes working good. |
I've did some further investigation but didn't manage to decrypt the network. I think the only hope to ever solve this issue is that IKEA shares the required Zigbee commands. I've asked them here: https://www.reddit.com/r/tradfri/comments/bpx9qf/what_magic_setup_does_the_e1524_ikea_tradfri/, fingers crossed.. |
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions. |
Does the coordinator know which bulbs the remote is paired to? |
i have the two problems.
|
@vogler I think the whole idea of this is that it works when zigbee2mqtt is down, note that your solution can already be achieved via e.g. a home assistant automation. @BafHS for 2 you can use the reporting feature: http://www.zigbee2mqtt.io/information/report.html |
Hmm, some new developments on the color temperature of IKEA bulbs using binding with E1524/E1810 remote.. After upgrading the firware to 2.3.080, the binding of the remote does not work for groups anymore, but should be done to devices directly; this is in line with documentation on E1524/E1810 - binding. The color changing option however now only works for the first device bound to the remote. Any subsequent bulbs/spots that you bind, won't change its color temperature anymore according to the predefined scenes.. Tried several things like adding/removing the 'magic' 65289 group, adding/removing the scenes, bind/unbind, etc. but nothing worked so far... After some time I noticed only the first(!) device that was bound to the remote responds to the 'left/right click' color changing feature. |
Ive had my RPi4+HA for about a month now. I have an Ikea bulb and a Styrbar E2001/E2002 4 button remote in my bedroom which worked fine up until yesterday I think. Now only the on/off and dimming functionality is working, the color temp/scenes is not working. Im using Zigbee2mqtt Edge (as that solved the problem according to another thread, though didnt work for me), and I have Zigbee2MqttAssistant as well. Can I ask for help about that here? |
Apparently, in my case, this issue does not apply. |
Gave it another try since it does seem to work for others and it turns out that binding the 'Scenes' feature specifically (next to 'LevelCtrl' and 'OnOff') makes it work for multiple devices at the same time.. Makes sense in the end.. lol |
Was there a reason this was closed? Nothing I do can get those left/right buttons to do anything. Lamp is https://www.zigbee2mqtt.io/devices/LED2035G10.html#ikea-led2035g10 The button presses are being recognised in z2m |
Did you bind the scenes function as well? (And set those scenes up) |
When my remote was running fw 2.3.014 i got this working by:
Everything was working including temperature - no scenes. Did this for 2 remotes on two different lights. Then one remote was upgraded to 2.3.080. No i can't get temperature to work after rebinding directly to the light - no groups supported. Any way to downgrade the fw again? |
And i think issue should be opened until fixed :) |
@endreigesund Did you bind the function/cluster 'Scenes' as well between remote and bulb?
Then you should be able to switch through the scenes via the 'left/right click' on the remote. |
@martin-g-it thanks - so this works for the latest fw on the remote? if i have several remotes controlling different lights - can i make several 65289-groups or add all lights to the same group? And binding the remote should be directly to the bulb and not the group - right? |
IKEA have blocking firmware downgrading in all (known) controller firmware so its not possible doing it with OTA. My and some users have doing it by flashing the last good with group support but its need SWD flashing and opening the remote for doing it. |
@MattWestb Likely won't work but Xiaomi devices also try to prevent downgrading, but the OTA image version in the header file can be bumped up (the actual OTA image isn't modified). |
Yes |
@TheJulianJES I think it shall work only that we need fixing the broken signing of the OTA file but perhaps our @puddly is knowing if its possible patching the OTA header without braking the signing. I think you is having some IKEA controller can you trying patching and see if its possible getting the device flashing it after have downloading it ? |
The main problem with the Tradfri remote is that, to get the scenes working, there are quite a few details that you need to get right. I, too, have it working with the most recent firmware now. One key element (for my setup) was to not bind the remote to any group. |
Hi! Currently i am running the latest firmware on both devices. Before I found this guide. So this is what I have done so far. Step 3. This is where I get stuck: What i have tried so far: If I add scenes to the magic group, the scenes do not even activate and nothing happens. Any Idea what I might be doing wrong? |
Figured it out. Seems like when if I manipulate the sliders via the the GUI the color change does not stick. If I add the same scenes to the same group via JSON with the same values, it works. Is this possibly a bug? |
Added second light to the magic group. My Styrbar however still does magical things. ( connected to one of the lights in the m.group) |
|
@endreigesund |
I also don't see a "Scenes" cluster at the binding tab (device: E1524). But I see a "groups" cluster. When I try to bind it with the groups option to my osram lamp it doesn't work. Already created a group with the id 65289 and added a lamp to it and created some scenes with different light temps. I could not figure it out how to link the remote control to this group. |
@martin-g-it (or anyone else with current firmware) My remote ist still on firmware 2.3.014 and I#m unsure if I should go for the latest firmware or stick to 2.3.014. |
I don't believe the firmware of the remote is key in this matter. I believe it is related to the Z2M version... |
My result: Scene switching works. With the 24.4.5 firmware I additionally had to bind the Scenes cluster, with the 2.3.014 firmware just LevelCtrl and the OnOff cluser. I did not have to create and bin a "magic" group 65289. |
Appart from switching scenes with the left / rigth button, is it possible to directly bind any button from any device to a scene? Or must the device be able to do that? For example, bind the power button to a specific scene. |
Hi , it happened to me after updating the E1821 button that I don't see the button in homekit. I had it paired before, for example, with a Shelly light or bulb, is there any way to solve this problem? I see it in homebridge, but it doesn't show up in homekit |
This answer should be added to Styrbar remotes as well, as it just worked for me FINALLY !!! 1- Create a group called ikea_lights (or any name) with ID 65289 Topic: zigbee2mqtt/ikea_lights/set {"scene_add":{"ID":1,"name":"Cold temp","transition":1,"color_temp":250}} Then you should be able to switch through the scenes via the 'left/right click' on the remote. Enjoy ! |
Wow, finally. On step 4 I used a little bit of time before I realized it was in the developer toos --> services --> MQTT-publish. Wonder if its possible to set up more steps, or change the preset temperatures, but now it finally works, and I don't want to touch it again .... yet. |
The easier way is thru Devices > MQTT > Configure button, so I edited my post to reflect that, but call service works just fine as well indeed. I'm in the same boat as you, haven't risked tinkering with adding more scenes, but it should in theory work just the same... Altho this remote has a life of its own. One thing is you can completely delete those scenes and republish, I did it multiple times to make sure it was working fine, so don't be scared to tinker a bit. |
Hello,
after updating to the latest coordinator firmware (stable, January 2019) I was able to connect my IKEA TRADFRI floalt panel und the Ikea 5 button remote control...
Over zigbee2mqtt I have full control to the IKEA light panel (on/off, brightness, color temperature)
With the remote control I lost the ability to change the color temperature... So I can only switch it on and off and change brightness...
Very weird behavior... 😁
Somebody any idea how that can be happen and how to solve it.?
The text was updated successfully, but these errors were encountered: