-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
"error: z2m: Failed to configure TypeError: func is not a function" with new devices added. Version: 1.37.1-1 #22573
Comments
I have the same issue |
Could you provide the debug log of this? See this on how to enable debug logging. |
[2024-05-11 00:42:06] debug: zh:ember:ezsp: ===> [FRAME: ID=52:"SEND_UNICAST" Seq=139 Len=26] |
I don't know if it's good in this way, I noticed also that it's not possible to update devices...I tried to update a device from 3 hours... |
[2024-05-11 00:47:32] debug: zh:ember:uart:ash: <--- [FRAME type=DATA] |
There is also this error: |
This is my log with errors continuously that repeat from devices added after last update of Zigbee2Mqtt and the update of device that arrived at 99 % and restarted over and over again Info 2024-05-11 01:14:10Configuring 'Sensore Sala ContrattiR' |
What device is |
@Koenkk FYI, I saw the same error while working on the BTH-RA. That's why I had to revert some changes between commits, otherwise the device would fail to configure, and z2m would throw that error at me... 🤔 I was developing against 6b886f6 at the time. |
They are movement Sensor from Sonoff SNZB-06P |
I received today my first Sonoff SNZB-06P and got the same error messages in the log. |
AFAICT, all these devices have in common, that they're using Edit: In my particular case, it might have been because I forgot to remove a non-existent cluster from bindings. |
I received the same sensor today and have the same error. Sensor firmware is 1.0.6 which leads to an error on the OTA screen: Firmware on '0x0cae5ffffec13371' (SNZB-06P) is newer than latest firmware online. |
Alos same Error in Z2M In ZHA second SNZB-06P sometimes it will not change the status.. Looks like a firmware bug. |
Fixed! Changes will be available in the dev branch in a few hours from now. |
Same error for me, just received my first SNZB-06P today and got this error during pairing.
https://www.zigbee2mqtt.io/devices/SNZB-06P.html My setup
with coordinator SMLIGHT SLZB-06(M) I understand that a fix is already in motion and it is available on dev branch, I look forward on having this on production branch |
Is there anything to do apart of using the latest-dev branch? I still see this error:
|
@linuxmaniac Nope. Also, that error is something different. |
Also having this issue with the Sonoff presence sensor mentioned above on the latest z2mqtt, and it was fine before. Is there an easy way to downgrade z2mqtt without relying on restoring HA backup (as that means I'll lose many changes done in the last 2-4 weeks) ? |
What happened?
error: z2m: Failed to configure TypeError: func is not a function
What did you expect to happen?
Nothing
How to reproduce it (minimal and precise)
With this new firmware 1.37.1-1 and previous if you add new devices you will have always this error...I also tried to remove and add them again without success
Zigbee2MQTT version
1.37.1-1
Adapter firmware version
7.4.2 [GA]
Adapter
EmberZNet usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20231220144601-if00
Setup
Raspberry 5 with Hassio
Debug log
No response
The text was updated successfully, but these errors were encountered: