cura-build-i386

This repository contains build scripts used to build Cura and all dependencies from scratch on a Linux i386 machine. Tested only on an Ubuntu Trusty (14.04) setup. Experimental : Some dependencies might require manual installing.

OS X

Use the official Cura build project : https://github.com/Ultimaker/cura-build

Windows

Use the official Cura build project : https://github.com/Ultimaker/cura-build

Ubuntu/Linux (Trusty, probably needs tweaking for younger releases).

cura-build can build Ubuntu/Debian packages of Cura.

Dependencies (Needs updating):

• git
• python3 (>= 3.4.0)
• python3-dev (>= 3.4.0)
• python3-pyqt5 (>= 5.4.0)
• python3-pyqt5.qtopengl (>= 5.4.0)
• python3-pyqt5.qtquick (>= 5.4.0)
• python3-pyqt5.qtsvg (>= 5.4.0)
• python3-numpy (>= 1.8.0)
• python3-serial (>= 2.6)
• python3-opengl (>= 3.0)
• python3-setuptools
• libqt5designer5
• libqt5gui5
• libqt5help5
• libqt5printsupport5
• libqt5widgets5
• libqt5opengl5
• libqt5quick5
• libqt5svg5
• libxcb1-dev
• libx11-dev
• build-essential
• pkg-config
• zlib1g
• software-properties-common
• cmake (>= 3.2)
• sip
• gcc (>= 4.9)
• gfortran (>= 4.9)
• python3-pip
• pytest-runner (for use by python 3)
• mesa-utils (only needed at runtime)
• qtbase5-dev (only needed at runtime)

To build, make sure these dependencies are installed, then clone this repository :

sudo -E add-apt-repository ppa:george-edison55/cmake-3.x
sudo -E add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install git python3 python3-dev python3-pyqt5 python3-pyqt5.qtopengl python3-pyqt5.qtquick python3-pyqt5.qtsvg python3-numpy python3-serial python3-opengl python3-setuptools libqt5designer5 libqt5gui5 libqt5help5 libqt5printsupport5 libqt5widgets5 libqt5opengl5 libqt5quick5 libqt5svg5 libxcb1-dev libx11-dev build-essential pkg-config zlib1g software-properties-common cmake sip-dev gcc-4.9 g++-4.9 gfortran-4.9 python3-pip mesa-utils qtbase5-dev
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 60 --slave /usr/bin/g++ g++ /usr/bin/g++-4.9
sudo update-alternatives --install /usr/bin/gfortran gfortran /usr/bin/gfortran-4.9 60
sudo -E pip3 install pytest-runner
git clone http://github.com/Logre/cura-build-i386.git

And then run the following commands from your clone :

cd cura-build-i386
mkdir build
cd build
cmake ..
make
make package

CentOS/Linux (untested, outdated instructions)

cura-build can build CentOS/RHEL packages of Cura.

Dependencies:

• gcc-gfortran
• python34.x86_64
• python34-devel.x86_64
• python34-numpy.x86_64
• pyserial.noarch
• PyOpenGL.noarch
• python34-setuptools.noarch
• wxPython.x86_64
• libstdc++-static.x86_64
• libstdc++-devel.x86_64
• openssl.x86_64
• openblas-devel.x86_64
• python34-numpy-f2py.x86_64

To build, make sure these dependencies are installed, then clone this repository and run the following commands from your clone:

sudo yum install gcc-gfortran python34.x86_64 python34-devel.x86_64 python34-numpy.x86_64 pyserial.noarch PyOpenGL.noarch python34-setuptools.noarch wxPython.x86_64 libstdc++-static.x86_64 libstdc++-devel.x86_64 openssl.x86_64 openblas-devel.x86_64 python34-numpy-f2py.x86_64

1. download and install scipy from https://github.com/scipy/scipy/releases be sure to use python 3.4, eg. using sudo python3 setup.py 2. install (version in repository is for python 2.7)
2. download and install CMake from https://cmake.org/download/ and configure CMake to use ssl
3. download and install Qt5 from https://www.qt.io/download/
4. download and install PyQt5 from https://www.riverbankcomputing.com/software/pyqt/download5
5. download and install sip from https://www.riverbankcomputing.com/software/sip/download make sure the verion is 4.18 or newer

Alternative method for installing python at: https://edwards.sdsu.edu/research/installing-python3-4-and-the-scipy-stack-on-centos/ . Make sure, that the PYTHONPATH can find dist-packages.

git clone http://github.com/Ultimaker/cura-build.git
cd cura-build

mkdir build
cd build
cmake ..
make
make package