BulkBurnDVD

This is a simple application written in Go which helps you to burn a lot of DVDs.
It's written in Go and only works on Linux.

How to use

1. Create a ISO with the content of the DVDs.
2. Install Go, growisofs and gcc
3. Customize your settings in the drive.go file
4. Run the program with go run ./..

Now as the program runs, you just put a DVDs in one of the configured drives and the program will burn the ISO on the DVD. When it's finished it'll eject the drive and you can put a new DVD into it.

But if the drive should eject the DVD after 30s, it's very likely that a error occurred. Report it via the GitHubs issue.

That's it. It's so simple!

Question: I want to use multiple drives

Simple, just duplicate the following code (in writer.go) and customize the settings.

go writeLoop(&DvdDrive{
    // You can find out the id of your drive via 'ls /dev/disk/by-id/'.
    // If you've got no idea how your drive could be called
    // use a burn program with a GUI and check the available drives.
    id:    "ata-Optiarc_DVD_RW_AD-7740H",
    // You can find out the write speed of your drive via the device documentation.
    // Just google the you've got from 'ls /dev/disk/by-id/'
    // DIRTY HACK: Use a burn program with a GUI like XfBurn
    // and look for the maximum speed you can select
    speed: 8,
})