Skip to content

Deep Reinforcement Learning (DQN) based Self Driving Car Control with Vehicle Simulator

Notifications You must be signed in to change notification settings

MLJejuCamp2017/DRL_based_SelfDrivingCarControl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

Β 

History

66 Commits
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 

Repository files navigation

DRL Based Self Driving Car Control

Version 1.8

Version information of this project

Unity Project is provided! Please refer to the simulator section.


Introduction

[2018. 10. 22] Paper of this Project is accepted to Intelligent Vehicle Symposium 2018!! πŸ˜„

[2019. 05. 28] Paper of this Project is accepted to IEEE Transactions on Intelligent Vehicles!! πŸ˜„

IV2018 PPT

Link of IV2018 Paper

Link of IEEE Transactions on Intelligent Vehicles Paper

IV2018

IV2018


This repository is for Deep Reinforcement Learning Based Self Driving Car Control project in ML Jeju Camp 2017

There are 2 main goals for this project.

  • Making vehicle simulator with Unity ML-Agents.

  • Control self driving car in the simulator with some safety systems.

    As a self driving car engineer, I used lots of vehicle sensors(e.g. RADAR, LIDAR, ...) to perceive environments around host vehicle. Also, There are a lot of Advanced Driver Assistant Systems (ADAS) which are already commercialized. I wanted to combine these things with my deep reinforcement learning algorithms to control self driving car.

Simple overview of my project is as follows.

Snesor data plotting

I will use sensor data and camera image as inputs of DRL algorithm. DRL algorithm decides action according to the inputs. If the action may cause dangerous situation, ADAS controls the vehicle to avoid collision.


Software and Hardware configuration of this project

Software

  • Windows10 (64bit)
  • Python 3.6.5
  • Anaconda 5.2.0
  • Tensorflow 1.8.0

Hardware

  • CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHZ

  • GPU: GeForce GTX 1080 Ti

  • Memory: 8GB


How to Run this Project

  1. download the github repo
  2. open the ipynb file in the RL_algorithm folder
  3. Set the environment path and run it!

Environment Path Setting

Env path

You should select os between Windows, Mac and Linux.

Also, for using this environment in Linux, you should chmod to change the access mode of a .x86_64 file. Example code of chmod is as follows.

chmod -R 775 *.x86_64


Description of files

  • ***_Image.ipynb: Network using only image of vehicle.
  • ***_sensor.ipynb: Network using only sensor data of vehicle.
  • ***_image_sensor.ipynb: Network using both image and sensor of vehicle

I also upload the other DQN based algorithms which I tested with the games that I made. Check out my DRL github repo

This is my PPT file of final presentation(Jeju Camp)


Specific explanation of my simulator and model is as follows.


Simulator

Snesor data plotting

I made this simulator to test my DRL algorithms. Also, to test my algorithms, I need sensor data and Camera images as inputs, but there was no driving simulators which provides both sensor data and camera images. Therefore, I tried to make one by myself.

The simulator is made by Unity ML-agents


Unity Project of the Simulator is Provided without paid assets!!. Please open the Unity_SDK folder with Unity. Therefore, you should buy and import the following assets in the project to use it.

SimpleSky

SimpleTown

SimpleRacer


Inputs

As, I mentioned simulator provides 2 inputs to DRL algorithm. Forward camera, Sensor data. The example of those inputs are as follows.

Front Camera Image Sensor data Plotting
Snesor data plotting Snesor data plotting

Also, vehicles of this simulator have some safety functions. This functions are applied to the other vehicles and host vehicle of ADAS version. The sensor overview is as follows.

Snesor data plotting

The safety functions are as follows.

  • Forward warning
    • Control the velocity of host vehicle equal to velocity of the vehicle at the front.
    • If distance between two vehicles is too close, rapidly drop the velocity to the lowest velocity
  • Side warning: No lane change
  • Lane keeping: If vehicle is not in the center of the lane, move vehicle to the center of the lane.

Vector Observation information

In this simulator, size of vector observation is 373.

0 ~ 359: LIDAR Data (1 particle for 1 degree)

360 ~ 362: Left warning, Right Warning, Forward Warning (0: False, 1: True)

363: Normalized forward distance

364: Forward vehicle Speed

365: Host Vehicle Speed

0 ~ 365 are used as input data for sensor

366 ~ 372 are used for sending information

366: Number of Overtake in a episode

367: Number of lane change in a episode

368 ~ 372: Longitudinal reward, Lateral reward, Overtake reward, Violation reward, collision reward

(Specific information of rewards are as follows)


Actions

The action of the vehicle is as follows.

  • Do nothing
  • Acceleration
  • Deceleration
  • Lane change to left lane
  • Lane change to right lane

Rewards

In this simulator, 5 different kinds of rewards are used.

Longitudinal reward: ((vehicle_speed - vehicle_speed_min) / (vehicle_speed_max - vehicle_speed_min));

  • 0: Minimum speed, 1: Maximum speed

Lateral reward: - 0.5

  • During the lane change it continuously get lateral reward

Overtake reward: 0.5* (num_overtake - num_overtake_old)

  • 0.5 / overtake

Violation reward: -0.1

  • example: If vehicle do left lane change at left warning, it gets violation reward (Front and right warning also)

Collision reward: -10

  • If collision happens, it gets collision reward

Sum of these 5 rewards is final reward of this simulator


Sliders

Slider

You can change some parameters with the Slider on the left side of simulator

  • Number of Vehicles (0 ~ 32) : Change the number of other vehicles
  • Random Action (0 ~ 6): Change the random action level of other vehicles (Higher value, more random action)

Additional Options

Foggy Weather

If you change the Foggy Weather dropdown menu to on, there will be fog to disturb camera image as follows.

Foggy Option

The Driver View images of the foggy weather are as follows.

Foggy Examples

Sensor Noise

sensor Noise

Sensor noise can be applied!!

If you set the Sensor Noise dropdown to On, you can control the Noise Weight using Slider. The equation of the adding noise to parameter a is as follows.

a = a + (noise_weight * Random.Range(-a, a))


DRL Model

For this project, I read papers as follows.

  1. Human-level Control Through Deep Reinforcement Learning

  2. Deep Reinforcement Learning with Double Q-Learning

  3. Prioritized Experience Replay

  4. Dueling Network Architecture for Deep Reinforcement Learning

You can find the code of those algorithms at my DRL github.

I applied algorithms 1 ~ 4 to my DRL model. The network model is as follows.

Snesor data plotting


Result

Graphs

Average Speed Average # of Lane Change Average # of Overtake
Graph(Lane Change) Graph(Lane Change) Graph(Lane Change)
Input Configuration Speed (km/h) Number of Lane Change Number of Overtaking
Camera Only 71.0776 15 35.2667
LIDAR Only 71.3758 14.2667 38.0667
Multi-Input 75.0212 19.4 44.8

Before Training

Result(Before Training)

After Training

Result(After Training)

After Training (with fog)

Result(After Training_fog)

After training, host vehicle drives mush faster (almost at the maximum speed!!!) with little lane change!! Yeah! :happy:

Citation

@inproceedings{min2018deep,
  title={Deep Q Learning Based High Level Driving Policy Determination},
  author={Min, Kyushik and Kim, Hayoung},
  booktitle={2018 IEEE Intelligent Vehicles Symposium (IV)},
  pages={226--231},
  year={2018},
  organization={IEEE}
}
@article{min2019deep,
  title={Deep Distributional Reinforcement Learning Based High Level Driving Policy Determination},
  author={Min, Kyushik and Kim, Hayoung and Huh, Kunsoo},
  journal={IEEE Transactions on Intelligent Vehicles},
  year={2019},
  publisher={IEEE}
}

About

Deep Reinforcement Learning (DQN) based Self Driving Car Control with Vehicle Simulator

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published