🔧 Base NUM_AXES on defined DRIVER_TYPEs

MarlinFirmware/Marlin#24106
MarlinFirmware · Apr 29, 2022 · 422f0c1 · 422f0c1
1 parent b9522cf
commit 422f0c1
Show file tree

Hide file tree

Showing 309 changed files with 13,018 additions and 17,962 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -152,20 +152,45 @@
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 /**
- * Define the number of coordinated axes.
- * See https://github.com/DerAndere1/Marlin/wiki
- * Each axis gets its own stepper control and endstop:
+ * Stepper Drivers
+ *
+ * These settings allow Marlin to tune stepper driver timing and enable advanced options for
+ * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
+ *
+ * A4988 is assumed for unspecified drivers.
  *
- *   Steppers: *_STEP_PIN, *_ENABLE_PIN, *_DIR_PIN, *_ENABLE_ON
- *   Endstops: *_STOP_PIN, USE_*MIN_PLUG, USE_*MAX_PLUG
- *       Axes: *_MIN_POS, *_MAX_POS, INVERT_*_DIR
- *    Planner: DEFAULT_AXIS_STEPS_PER_UNIT, DEFAULT_MAX_FEEDRATE
- *             DEFAULT_MAX_ACCELERATION, AXIS_RELATIVE_MODES,
- *             MICROSTEP_MODES, MANUAL_FEEDRATE
+ * Use TMC2208/TMC2208_STANDALONE for TMC2225 drivers and TMC2209/TMC2209_STANDALONE for TMC2226 drivers.
  *
- * :[3, 4, 5, 6, 7, 8, 9]
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
+ *          TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
+ *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-//#define NUM_AXES 3
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define Z3_DRIVER_TYPE A4988
+//#define Z4_DRIVER_TYPE A4988
+//#define I_DRIVER_TYPE  A4988
+//#define J_DRIVER_TYPE  A4988
+//#define K_DRIVER_TYPE  A4988
+//#define U_DRIVER_TYPE  A4988
+//#define V_DRIVER_TYPE  A4988
+//#define W_DRIVER_TYPE  A4988
+#define E0_DRIVER_TYPE A4988
+//#define E1_DRIVER_TYPE A4988
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+//#define E5_DRIVER_TYPE A4988
+//#define E6_DRIVER_TYPE A4988
+//#define E7_DRIVER_TYPE A4988
 
 /**
  * Additional Axis Settings
@@ -184,27 +209,27 @@
  *
  * Regardless of these settings the axes are internally named I, J, K, U, V, W.
  */
-#if NUM_AXES >= 4
+#ifdef I_DRIVER_TYPE
   #define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
   #define AXIS4_ROTATES
 #endif
-#if NUM_AXES >= 5
+#ifdef J_DRIVER_TYPE
   #define AXIS5_NAME 'B' // :['B', 'C', 'U', 'V', 'W']
   #define AXIS5_ROTATES
 #endif
-#if NUM_AXES >= 6
+#ifdef K_DRIVER_TYPE
   #define AXIS6_NAME 'C' // :['C', 'U', 'V', 'W']
   #define AXIS6_ROTATES
 #endif
-#if NUM_AXES >= 7
+#ifdef U_DRIVER_TYPE
   #define AXIS7_NAME 'U' // :['U', 'V', 'W']
   //#define AXIS7_ROTATES
 #endif
-#if NUM_AXES >= 8
+#ifdef V_DRIVER_TYPE
   #define AXIS8_NAME 'V' // :['V', 'W']
   //#define AXIS8_ROTATES
 #endif
-#if NUM_AXES >= 9
+#ifdef W_DRIVER_TYPE
   #define AXIS9_NAME 'W' // :['W']
   //#define AXIS9_ROTATES
 #endif
@@ -943,47 +968,6 @@
 #define W_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
 
-/**
- * Stepper Drivers
- *
- * These settings allow Marlin to tune stepper driver timing and enable advanced options for
- * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
- *
- * A4988 is assumed for unspecified drivers.
- *
- * Use TMC2208/TMC2208_STANDALONE for TMC2225 drivers and TMC2209/TMC2209_STANDALONE for TMC2226 drivers.
- *
- * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
- *          TB6560, TB6600, TMC2100,
- *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
- *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
- *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
- *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
- * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
- */
-#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  A4988
-//#define X2_DRIVER_TYPE A4988
-//#define Y2_DRIVER_TYPE A4988
-//#define Z2_DRIVER_TYPE A4988
-//#define Z3_DRIVER_TYPE A4988
-//#define Z4_DRIVER_TYPE A4988
-//#define I_DRIVER_TYPE  A4988
-//#define J_DRIVER_TYPE  A4988
-//#define K_DRIVER_TYPE  A4988
-//#define U_DRIVER_TYPE  A4988
-//#define V_DRIVER_TYPE  A4988
-//#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
-//#define E1_DRIVER_TYPE A4988
-//#define E2_DRIVER_TYPE A4988
-//#define E3_DRIVER_TYPE A4988
-//#define E4_DRIVER_TYPE A4988
-//#define E5_DRIVER_TYPE A4988
-//#define E6_DRIVER_TYPE A4988
-//#define E7_DRIVER_TYPE A4988
-
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -153,20 +153,45 @@
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 /**
- * Define the number of coordinated axes.
- * See https://github.com/DerAndere1/Marlin/wiki
- * Each axis gets its own stepper control and endstop:
+ * Stepper Drivers
+ *
+ * These settings allow Marlin to tune stepper driver timing and enable advanced options for
+ * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
+ *
+ * A4988 is assumed for unspecified drivers.
  *
- *   Steppers: *_STEP_PIN, *_ENABLE_PIN, *_DIR_PIN, *_ENABLE_ON
- *   Endstops: *_STOP_PIN, USE_*MIN_PLUG, USE_*MAX_PLUG
- *       Axes: *_MIN_POS, *_MAX_POS, INVERT_*_DIR
- *    Planner: DEFAULT_AXIS_STEPS_PER_UNIT, DEFAULT_MAX_FEEDRATE
- *             DEFAULT_MAX_ACCELERATION, AXIS_RELATIVE_MODES,
- *             MICROSTEP_MODES, MANUAL_FEEDRATE
+ * Use TMC2208/TMC2208_STANDALONE for TMC2225 drivers and TMC2209/TMC2209_STANDALONE for TMC2226 drivers.
  *
- * :[3, 4, 5, 6, 7, 8, 9]
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
+ *          TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
+ *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-//#define NUM_AXES 3
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define Z3_DRIVER_TYPE A4988
+//#define Z4_DRIVER_TYPE A4988
+//#define I_DRIVER_TYPE  A4988
+//#define J_DRIVER_TYPE  A4988
+//#define K_DRIVER_TYPE  A4988
+//#define U_DRIVER_TYPE  A4988
+//#define V_DRIVER_TYPE  A4988
+//#define W_DRIVER_TYPE  A4988
+#define E0_DRIVER_TYPE A4988
+//#define E1_DRIVER_TYPE A4988
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+//#define E5_DRIVER_TYPE A4988
+//#define E6_DRIVER_TYPE A4988
+//#define E7_DRIVER_TYPE A4988
 
 /**
  * Additional Axis Settings
@@ -185,27 +210,27 @@
  *
  * Regardless of these settings the axes are internally named I, J, K, U, V, W.
  */
-#if NUM_AXES >= 4
+#ifdef I_DRIVER_TYPE
   #define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
   #define AXIS4_ROTATES
 #endif
-#if NUM_AXES >= 5
+#ifdef J_DRIVER_TYPE
   #define AXIS5_NAME 'B' // :['B', 'C', 'U', 'V', 'W']
   #define AXIS5_ROTATES
 #endif
-#if NUM_AXES >= 6
+#ifdef K_DRIVER_TYPE
   #define AXIS6_NAME 'C' // :['C', 'U', 'V', 'W']
   #define AXIS6_ROTATES
 #endif
-#if NUM_AXES >= 7
+#ifdef U_DRIVER_TYPE
   #define AXIS7_NAME 'U' // :['U', 'V', 'W']
   //#define AXIS7_ROTATES
 #endif
-#if NUM_AXES >= 8
+#ifdef V_DRIVER_TYPE
   #define AXIS8_NAME 'V' // :['V', 'W']
   //#define AXIS8_ROTATES
 #endif
-#if NUM_AXES >= 9
+#ifdef W_DRIVER_TYPE
   #define AXIS9_NAME 'W' // :['W']
   //#define AXIS9_ROTATES
 #endif
@@ -945,47 +970,6 @@
 #define W_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // Set to true to invert the logic of the probe.
 
-/**
- * Stepper Drivers
- *
- * These settings allow Marlin to tune stepper driver timing and enable advanced options for
- * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
- *
- * A4988 is assumed for unspecified drivers.
- *
- * Use TMC2208/TMC2208_STANDALONE for TMC2225 drivers and TMC2209/TMC2209_STANDALONE for TMC2226 drivers.
- *
- * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
- *          TB6560, TB6600, TMC2100,
- *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
- *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
- *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
- *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
- * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
- */
-#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  A4988
-//#define X2_DRIVER_TYPE A4988
-//#define Y2_DRIVER_TYPE A4988
-//#define Z2_DRIVER_TYPE A4988
-//#define Z3_DRIVER_TYPE A4988
-//#define Z4_DRIVER_TYPE A4988
-//#define I_DRIVER_TYPE  A4988
-//#define J_DRIVER_TYPE  A4988
-//#define K_DRIVER_TYPE  A4988
-//#define U_DRIVER_TYPE  A4988
-//#define V_DRIVER_TYPE  A4988
-//#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
-//#define E1_DRIVER_TYPE A4988
-//#define E2_DRIVER_TYPE A4988
-//#define E3_DRIVER_TYPE A4988
-//#define E4_DRIVER_TYPE A4988
-//#define E5_DRIVER_TYPE A4988
-//#define E6_DRIVER_TYPE A4988
-//#define E7_DRIVER_TYPE A4988
-
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE