Probe Offset Wizard improvements (#20239)

MarlinFirmware · Nov 26, 2020 · 649965a · 649965a
1 parent afe5027
commit 649965a
Show file tree

Hide file tree

Showing 8 changed files with 109 additions and 60 deletions.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1084,8 +1084,14 @@
   #if HAS_BED_PROBE
     //#define PROBE_OFFSET_WIZARD
     #if ENABLED(PROBE_OFFSET_WIZARD)
-      #define PROBE_OFFSET_START -4.0   // Estimated nozzle-to-probe Z offset, plus a little extra
-      //#define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER // Set a convenient position to do the measurement
+      //
+      // Enable to init the Probe Z-Offset when starting the Wizard.
+      // Use the estimated nozzle-to-probe Z offset, plus a little more.
+      //
+      //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+
+      // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
+      //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
     #endif
   #endif
 

diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
@@ -324,7 +324,7 @@ void GcodeSuite::G28() {
         ? 0
         : (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT);
 
-    if (z_homing_height && (doX || doY || (ENABLED(Z_SAFE_HOMING) && doZ))) {
+    if (z_homing_height && (doX || doY || TERN0(Z_SAFE_HOMING, doZ))) {
       // Raise Z before homing any other axes and z is not already high enough (never lower z)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
       do_z_clearance(z_homing_height, true, DISABLED(UNKNOWN_Z_NO_RAISE));
@@ -337,7 +337,7 @@ void GcodeSuite::G28() {
     #endif
 
     // Home Y (before X)
-    if (ENABLED(HOME_Y_BEFORE_X) && (doY || (ENABLED(CODEPENDENT_XY_HOMING) && doX)))
+    if (ENABLED(HOME_Y_BEFORE_X) && (doY || TERN0(CODEPENDENT_XY_HOMING, doX)))
       homeaxis(Y_AXIS);
 
     // Home X

diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
@@ -525,6 +525,8 @@
   #error "EVENT_GCODE_SD_STOP is now EVENT_GCODE_SD_ABORT."
 #elif defined(GRAPHICAL_TFT_ROTATE_180)
   #error "GRAPHICAL_TFT_ROTATE_180 is now TFT_ROTATION set to TFT_ROTATE_180."
+#elif defined(PROBE_OFFSET_START)
+  #error "PROBE_OFFSET_START is now PROBE_OFFSET_WIZARD_START_Z."
 #elif defined(POWER_LOSS_PULL)
   #error "POWER_LOSS_PULL is now specifically POWER_LOSS_PULL(UP|DOWN)."
 #elif defined(FIL_RUNOUT_INVERTING)
@@ -1345,25 +1347,32 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "Z_MIN_PROBE_PIN must be defined if Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN is not enabled."
   #endif
 
+  /**
+   * Check for improper NOZZLE_TO_PROBE_OFFSET
+   */
+  constexpr xyz_pos_t sanity_nozzle_to_probe_offset = NOZZLE_TO_PROBE_OFFSET;
   #if ENABLED(NOZZLE_AS_PROBE)
-    constexpr float sanity_nozzle_to_probe_offset[] = NOZZLE_TO_PROBE_OFFSET;
-    static_assert(sanity_nozzle_to_probe_offset[0] == 0.0 && sanity_nozzle_to_probe_offset[1] == 0.0,
-                  "NOZZLE_AS_PROBE requires the X,Y offsets in NOZZLE_TO_PROBE_OFFSET to be 0,0.");
-  #endif
-
-  #if DISABLED(NOZZLE_AS_PROBE)
-    static_assert(PROBING_MARGIN >= 0, "PROBING_MARGIN must be >= 0.");
-    static_assert(PROBING_MARGIN_BACK >= 0, "PROBING_MARGIN_BACK must be >= 0.");
+    static_assert(sanity_nozzle_to_probe_offset.x == 0 && sanity_nozzle_to_probe_offset.y == 0,
+                  "NOZZLE_AS_PROBE requires the XY offsets in NOZZLE_TO_PROBE_OFFSET to both be 0.");
+  #else
+    static_assert(sanity_nozzle_to_probe_offset.z <= 0.25,
+                  "Are you sure your Probe triggers above the nozzle? Set a negative Z value in the NOZZLE_TO_PROBE_OFFSET.");
+    #ifdef PROBE_OFFSET_WIZARD_START_Z
+      static_assert(PROBE_OFFSET_WIZARD_START_Z <= 0.25,
+                    "Are you sure your Probe triggers above the nozzle? Set a negative value for PROBE_OFFSET_WIZARD_START_Z.");
+    #endif
+    static_assert(PROBING_MARGIN       >= 0, "PROBING_MARGIN must be >= 0.");
+    static_assert(PROBING_MARGIN_BACK  >= 0, "PROBING_MARGIN_BACK must be >= 0.");
     static_assert(PROBING_MARGIN_FRONT >= 0, "PROBING_MARGIN_FRONT must be >= 0.");
-    static_assert(PROBING_MARGIN_LEFT >= 0, "PROBING_MARGIN_LEFT must be >= 0.");
+    static_assert(PROBING_MARGIN_LEFT  >= 0, "PROBING_MARGIN_LEFT must be >= 0.");
     static_assert(PROBING_MARGIN_RIGHT >= 0, "PROBING_MARGIN_RIGHT must be >= 0.");
   #endif
 
   #define _MARGIN(A) TERN(IS_SCARA, SCARA_PRINTABLE_RADIUS, TERN(DELTA, DELTA_PRINTABLE_RADIUS, ((A##_BED_SIZE) / 2)))
-  static_assert(PROBING_MARGIN < _MARGIN(X), "PROBING_MARGIN is too large.");
-  static_assert(PROBING_MARGIN_BACK < _MARGIN(Y), "PROBING_MARGIN_BACK is too large.");
+  static_assert(PROBING_MARGIN       < _MARGIN(X), "PROBING_MARGIN is too large.");
+  static_assert(PROBING_MARGIN_BACK  < _MARGIN(Y), "PROBING_MARGIN_BACK is too large.");
   static_assert(PROBING_MARGIN_FRONT < _MARGIN(Y), "PROBING_MARGIN_FRONT is too large.");
-  static_assert(PROBING_MARGIN_LEFT < _MARGIN(X), "PROBING_MARGIN_LEFT is too large.");
+  static_assert(PROBING_MARGIN_LEFT  < _MARGIN(X), "PROBING_MARGIN_LEFT is too large.");
   static_assert(PROBING_MARGIN_RIGHT < _MARGIN(X), "PROBING_MARGIN_RIGHT is too large.");
   #undef _MARGIN
 

diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
@@ -673,6 +673,8 @@ namespace Language_en {
   PROGMEM Language_Str MSG_REHEATING                       = _UxGT("Reheating...");
 
   PROGMEM Language_Str MSG_PROBE_WIZARD                    = _UxGT("Z Probe Wizard");
+  PROGMEM Language_Str MSG_PROBE_WIZARD_PROBING            = _UxGT("Probing Z Reference");
+  PROGMEM Language_Str MSG_PROBE_WIZARD_MOVING             = _UxGT("Moving to Probing Pos");
 
   PROGMEM Language_Str MSG_SOUND                           = _UxGT("Sound");
 

diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
@@ -624,7 +624,7 @@ class MarlinUI {
   //
   // Special handling if a move is underway
   //
-  #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)) || (ENABLED(PROBE_OFFSET_WIZARD) && defined(PROBE_OFFSET_WIZARD_XY_POS))
+  #if ANY(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION, PROBE_OFFSET_WIZARD) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
     #define LCD_HAS_WAIT_FOR_MOVE 1
     static bool wait_for_move;
   #else

diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h
@@ -220,7 +220,7 @@ void _lcd_draw_homing();
 #endif
 
 #if ENABLED(PROBE_OFFSET_WIZARD)
-  void home_and_goto_probe_offset_wizard();
+  void goto_probe_offset_wizard();
 #endif
 
 #if ENABLED(LCD_BED_LEVELING) || (HAS_LEVELING && DISABLED(SLIM_LCD_MENUS))

diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp
@@ -488,7 +488,7 @@ void menu_backlash();
       EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
 
       #if ENABLED(PROBE_OFFSET_WIZARD)
-        SUBMENU(MSG_PROBE_WIZARD, home_and_goto_probe_offset_wizard);
+        SUBMENU(MSG_PROBE_WIZARD, goto_probe_offset_wizard);
       #endif
 
       END_MENU();

diff --git a/Marlin/src/lcd/menu/menu_probe_offset.cpp b/Marlin/src/lcd/menu/menu_probe_offset.cpp
@@ -28,12 +28,6 @@
 
 #if ENABLED(PROBE_OFFSET_WIZARD)
 
-#ifndef PROBE_OFFSET_START
-  #error "PROBE_OFFSET_WIZARD requires a PROBE_OFFSET_START with a negative value."
-#else
-  static_assert(PROBE_OFFSET_START < 0, "PROBE_OFFSET_START must be < 0. Please update your configuration.");
-#endif
-
 #include "menu_item.h"
 #include "menu_addon.h"
 #include "../../gcode/queue.h"
@@ -46,21 +40,20 @@
 #endif
 
 // Global storage
-float z_offset_backup, calculated_z_offset;
+float z_offset_backup, calculated_z_offset, z_offset_ref;
 
 TERN_(HAS_LEVELING, bool leveling_was_active);
 
-void prepare_for_calibration() {
-  z_offset_backup = probe.offset.z;
-
-  // Disable soft endstops for free Z movement
-  SET_SOFT_ENDSTOP_LOOSE(true);
-
-  // Disable leveling for raw planner motion
-  #if HAS_LEVELING
-    leveling_was_active = planner.leveling_active;
-    set_bed_leveling_enabled(false);
-  #endif
+inline void z_clearance_move() {
+  do_z_clearance(
+    #ifdef Z_AFTER_HOMING
+      Z_AFTER_HOMING
+    #elif defined(Z_HOMING_HEIGHT)
+      Z_HOMING_HEIGHT
+    #else
+      10
+    #endif
+  );
 }
 
 void set_offset_and_go_back(const float &z) {
@@ -77,7 +70,7 @@ void _goto_manual_move_z(const float scale) {
 
 void probe_offset_wizard_menu() {
   START_MENU();
-  calculated_z_offset = probe.offset.z + current_position.z;
+  calculated_z_offset = probe.offset.z + current_position.z - z_offset_ref;
 
   if (LCD_HEIGHT >= 4)
     STATIC_ITEM(MSG_MOVE_NOZZLE_TO_BED, SS_CENTER|SS_INVERT);
@@ -92,7 +85,7 @@ void probe_offset_wizard_menu() {
     char tmp[20], numstr[10];
     // Determine digits needed right of decimal
     const uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
-                          !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) *  100 - int((SHORT_MANUAL_Z_MOVE) *  100)) ? 3 : 2;
+                         !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) *  100 - int((SHORT_MANUAL_Z_MOVE) *  100)) ? 3 : 2;
     sprintf_P(tmp, GET_TEXT(MSG_MOVE_Z_DIST), dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr));
     #if DISABLED(HAS_GRAPHICAL_TFT)
       extern const char NUL_STR[];
@@ -107,47 +100,86 @@ void probe_offset_wizard_menu() {
 
   ACTION_ITEM(MSG_BUTTON_DONE, []{
     set_offset_and_go_back(calculated_z_offset);
-    do_z_clearance(20.0
-      #ifdef Z_AFTER_HOMING
-        - 20.0 + Z_AFTER_HOMING
-      #endif
-    );
+    current_position.z = z_offset_ref;  // Set Z to z_offset_ref, as we can expect it is at probe height
+    sync_plan_position();
+    z_clearance_move();                 // Raise Z as if it was homed
   });
 
   ACTION_ITEM(MSG_BUTTON_CANCEL, []{
     set_offset_and_go_back(z_offset_backup);
+    // If wizard-homing was done by probe with with PROBE_OFFSET_WIZARD_START_Z
+    #if EITHER(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, USE_PROBE_FOR_Z_HOMING) && defined(PROBE_OFFSET_WIZARD_START_Z)
+      set_axis_never_homed(Z_AXIS); // On cancel the Z position needs correction
+      queue.inject_P(PSTR("G28Z"));
+    #else // Otherwise do a Z clearance move like after Homing
+      z_clearance_move();
+    #endif
   });
 
   END_MENU();
 }
 
-#ifdef PROBE_OFFSET_WIZARD_XY_POS
+void prepare_for_probe_offset_wizard() {
+  if (ui.wait_for_move) return;
 
-  #define HAS_PROBE_OFFSET_WIZARD_XY_POS 1
+  #if defined(PROBE_OFFSET_WIZARD_XY_POS) || NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, USE_PROBE_FOR_Z_HOMING)
+    if (ui.should_draw()) MenuItem_static::draw(1, GET_TEXT(MSG_PROBE_WIZARD_PROBING));
 
-  inline void goto_probe_offset_wizard() {
-    if (ui.wait_for_move) return;
+    #ifndef PROBE_OFFSET_WIZARD_XY_POS
+      #define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER
+    #endif
+    // Get X and Y from configuration, or use center
     constexpr xy_pos_t wizard_pos = PROBE_OFFSET_WIZARD_XY_POS;
-    current_position = wizard_pos;
+
+    // Probe for Z reference
     ui.wait_for_move = true;
-    line_to_current_position(MMM_TO_MMS(HOMING_FEEDRATE_XY)); // Could invoke idle()
+    z_offset_ref = probe.probe_at_point(wizard_pos, PROBE_PT_STOW, 0, true);
     ui.wait_for_move = false;
-    ui.synchronize();
-    prepare_for_calibration();
-    probe.offset.z = PROBE_OFFSET_START;
-    ui.goto_screen(probe_offset_wizard_menu);
-    ui.defer_status_screen();
-  }
 
-#endif
+  #endif
+
+  // Move Nozzle to Probing/Homing Position
+  ui.wait_for_move = true;
+  current_position += probe.offset_xy;
+  line_to_current_position(MMM_TO_MMS(HOMING_FEEDRATE_XY));
+  ui.synchronize(GET_TEXT(MSG_PROBE_WIZARD_MOVING));
+  ui.wait_for_move = false;
+
+  // Go to Calibration Menu
+  ui.goto_screen(probe_offset_wizard_menu);
+  ui.defer_status_screen();
+}
+
+void goto_probe_offset_wizard() {
+  ui.defer_status_screen();
+  set_all_unhomed();
+
+  // Store probe.offset.z for Case: Cancel
+  z_offset_backup = probe.offset.z;
+
+  #ifdef PROBE_OFFSET_WIZARD_START_Z
+    probe.offset.z = PROBE_OFFSET_WIZARD_START_Z;
+  #endif
+
+  // Store Bed-Leveling-State and disable
+  #if HAS_LEVELING
+    leveling_was_active = planner.leveling_active;
+    set_bed_leveling_enabled(false);
+  #endif
 
-void home_and_goto_probe_offset_wizard() {
+  // Home all axes
   queue.inject_P(G28_STR);
+
   ui.goto_screen([]{
     _lcd_draw_homing();
-    if (all_axes_homed())
-      ui.goto_screen(TERN(HAS_PROBE_OFFSET_WIZARD_XY_POS, goto_probe_offset_wizard, probe_offset_wizard_menu));
+    if (all_axes_homed()) {
+      SET_SOFT_ENDSTOP_LOOSE(true); // Disable soft endstops for free Z movement
+      z_offset_ref = 0;             // Set Z Value for Wizard Position to 0
+      ui.goto_screen(prepare_for_probe_offset_wizard);
+      ui.defer_status_screen();
+    }
   });
+
 }
 
 #endif // PROBE_OFFSET_WIZARD