Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Updates to Formbot T-Rex 2+ configuration files #12422

Merged
merged 2 commits into from
Nov 13, 2018
Merged

Updates to Formbot T-Rex 2+ configuration files #12422

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
0af333f
Updates to Formbot T-Rex 2+ configuration files
Roxy-3D Nov 13, 2018
935a915
Make default for generic T-Rex 2+
Roxy-3D Nov 13, 2018
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
56 changes: 30 additions & 26 deletions Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -157,6 +157,17 @@

// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif

/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
Expand Down Expand Up @@ -242,6 +253,9 @@
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle

#ifdef ROXYs_TRex
#define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis
Expand Down Expand Up @@ -665,15 +679,13 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 }

/**
* Default Max Feed Rate (mm/s)
* Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/
//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 }
#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 }

/**
Expand All @@ -692,11 +704,6 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/

//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves

#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
Expand All @@ -709,11 +716,6 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
//#define DEFAULT_XJERK 20.0
//#define DEFAULT_YJERK 10.0
//#define DEFAULT_ZJERK 0.4
//#define DEFAULT_EJERK 5.0

#define DEFAULT_XJERK 12.0 // More conservitive numbers.
#define DEFAULT_YJERK 8.0
#define DEFAULT_ZJERK 0.4
Expand Down Expand Up @@ -801,6 +803,7 @@
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
#endif


// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE

Expand Down Expand Up @@ -846,7 +849,7 @@
#define MIN_PROBE_EDGE 0

// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 7000
#define XY_PROBE_SPEED 5000

// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
Expand Down Expand Up @@ -876,7 +879,7 @@
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 7 // Z position after probing is done
#define Z_AFTER_PROBING 10 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping

Expand Down Expand Up @@ -970,11 +973,11 @@
#define Z_MIN_POS 0
#define X_MAX_POS 450
#define Y_MAX_POS Y_BED_SIZE
#if ENABLED(tallVersion)
#define Z_MAX_POS 700
#else
#define Z_MAX_POS 500
#endif
#define Z_MAX_POS 700


// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)

/**
* Software Endstops
Expand Down Expand Up @@ -1110,7 +1113,7 @@
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 208.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif

Expand Down Expand Up @@ -1206,9 +1209,9 @@
//#define LCD_BED_LEVELING

#if ENABLED(LCD_BED_LEVELING)
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
#define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
//#define MESH_EDIT_MENU // Add a menu to edit mesh points
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
#define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
//#define MESH_EDIT_MENU // Add a menu to edit mesh points
#endif

// Add a menu item to move between bed corners for manual bed adjustment
Expand Down Expand Up @@ -1249,8 +1252,8 @@
#define Z_SAFE_HOMING

#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_X_POINT (((X_BED_SIZE) / 2) - 15) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT (((Y_BED_SIZE) / 2) - 15) // Y point for Z homing when homing all axes (G28).
#endif

// Homing speeds (mm/m)
Expand All @@ -1260,6 +1263,7 @@
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS


// @section calibrate

/**
Expand Down Expand Up @@ -1484,7 +1488,7 @@
*
* View the current statistics with M78.
*/
#define PRINTCOUNTER
//#define PRINTCOUNTER

//=============================================================================
//============================= LCD and SD support ============================
Expand Down
74 changes: 18 additions & 56 deletions Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -219,7 +219,7 @@
*
* Define one or both of these to override the default 0-255 range.
*/
#define FAN_MIN_PWM 64
#define FAN_MIN_PWM 45
//#define FAN_MAX_PWM 128

// @section extruder
Expand Down Expand Up @@ -365,12 +365,12 @@
*/
#define DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
Expand Down Expand Up @@ -433,6 +433,7 @@
#define Z_STEPPER_ALIGN_ACC 0.02
#endif


// @section machine

#define AXIS_RELATIVE_MODES {false, false, false, false}
Expand Down Expand Up @@ -513,6 +514,7 @@
//#define MICROSTEP16 LOW,LOW,HIGH
//#define MICROSTEP32 HIGH,LOW,HIGH


// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]

Expand Down Expand Up @@ -590,7 +592,7 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY

#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#if HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
Expand Down Expand Up @@ -1061,7 +1063,7 @@
* 'M106 P<fan> T2' : Use the set secondary speed
* 'M106 P<fan> T1' : Restore the previous fan speed
*/
#define EXTRA_FAN_SPEED
//#define EXTRA_FAN_SPEED

/**
* Firmware-based and LCD-controlled retract
Expand Down Expand Up @@ -1097,34 +1099,6 @@
//#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
#endif
#endif

/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)

// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif

/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif

/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.
Expand Down Expand Up @@ -1162,19 +1136,19 @@
// until extrusion is consistent, and to purge old filament.

// Filament Unload does a Retract, Delay, and Purge first:
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_RETRACT_LENGTH 0 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 500 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.

#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 1 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.

#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change

//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif

// @section tmc
Expand Down Expand Up @@ -1694,18 +1668,6 @@
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif

/**
* G-code Macros
*
* Add G-codes M810-M819 to define and run G-code macros.
* Macros are not saved to EEPROM.
*/
//#define GCODE_MACROS
#if ENABLED(GCODE_MACROS)
#define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
#define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
#endif

/**
* User-defined menu items that execute custom GCode
*/
Expand Down Expand Up @@ -1851,7 +1813,7 @@

#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
#define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
#define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain.
#define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
// connector at: right=0 bottom=-90 top=90 left=180
#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
Expand Down
1 change: 1 addition & 0 deletions Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -33,6 +33,7 @@

#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64

const unsigned char custom_start_bmp[] PROGMEM = {
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,
Expand Down