Thermocouple conditionals

Marlin/Configuration_adv.h

@@ -113,6 +113,12 @@
   #define CHAMBER_BETA                 3950    // Beta value
 #endif
 
+#if TEMP_SENSOR_PROBE == 1000
+  #define PROBE_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
+  #define PROBE_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
+  #define PROBE_BETA                   3950    // Beta value
+#endif
+
 //
 // Hephestos 2 24V heated bed upgrade kit.
 // https://store.bq.com/en/heated-bed-kit-hephestos2
@@ -331,7 +337,7 @@
  * High Temperature Thermistor Support
  *
  * Thermistors able to support high temperature tend to have a hard time getting
- * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
+ * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP
  * will probably be caught when the heating element first turns on during the
  * preheating process, which will trigger a min_temp_error as a safety measure
  * and force stop everything.

Marlin/src/MarlinCore.cpp

@@ -938,10 +938,10 @@ void setup() {
   SETUP_RUN(HAL_init());
 
   // Init and disable SPI thermocouples
-  #if HEATER_0_USES_MAX6675
+  #if TEMP_SENSOR_0_IS_MAX6675
     OUT_WRITE(MAX6675_SS_PIN, HIGH);  // Disable
   #endif
-  #if HEATER_1_USES_MAX6675
+  #if TEMP_SENSOR_1_IS_MAX6675
     OUT_WRITE(MAX6675_SS2_PIN, HIGH); // Disable
   #endif