Add HAL platform stub for simulator

.gitignore

@@ -143,7 +143,11 @@ vc-fileutils.settings
 .vscode/launch.json
 .vscode/*.db
 
-# cmake
+#Simulation
+imgui.ini
+eeprom.dat
+
+#cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt

Marlin/src/HAL/NATIVE_SIM/HAL.h

@@ -0,0 +1,217 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define CPU_32_BIT
+#define HAL_IDLETASK
+void HAL_idletask();
+
+#define F_CPU 100000000
+#define SystemCoreClock F_CPU
+#include <stdint.h>
+#include <stdarg.h>
+
+#undef min
+#undef max
+
+#include <algorithm>
+#include "pinmapping.h"
+
+void _printf (const  char *format, ...);
+void _putc(uint8_t c);
+uint8_t _getc();
+
+//extern "C" volatile uint32_t _millis;
+
+//arduino: Print.h
+#define DEC 10
+#define HEX 16
+#define OCT  8
+#define BIN  2
+//arduino: binary.h (weird defines)
+#define B01 1
+#define B10 2
+
+#include "../shared/Marduino.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
+#include "fastio.h"
+#include "watchdog.h"
+#include "serial.h"
+
+#define SHARED_SERVOS HAS_SERVOS
+
+extern MSerialT serial_stream_0;
+extern MSerialT serial_stream_1;
+extern MSerialT serial_stream_2;
+extern MSerialT serial_stream_3;
+
+#define _MSERIAL(X) serial_stream_##X
+#define MSERIAL(X) _MSERIAL(X)
+
+#if WITHIN(SERIAL_PORT, 0, 3)
+  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
+#else
+  #error "SERIAL_PORT must be from 0 to 3. Please update your configuration."
+#endif
+
+#ifdef SERIAL_PORT_2
+  #if WITHIN(SERIAL_PORT_2, 0, 3)
+    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
+  #else
+    #error "SERIAL_PORT_2 must be from 0 to 3. Please update your configuration."
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #else
+    #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration."
+  #endif
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #else
+    #error "LCD_SERIAL_PORT must be from 0 to 3. Please update your configuration."
+  #endif
+#endif
+
+
+#define ST7920_DELAY_1 DELAY_NS(600)
+#define ST7920_DELAY_2 DELAY_NS(750)
+#define ST7920_DELAY_3 DELAY_NS(750)
+
+//
+// Interrupts
+//
+#define CRITICAL_SECTION_START()
+#define CRITICAL_SECTION_END()
+#define ISRS_ENABLED()
+#define ENABLE_ISRS()
+#define DISABLE_ISRS()
+
+inline void HAL_init() {}
+
+// Utility functions
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+int freeMemory();
+#pragma GCC diagnostic pop
+
+// ADC
+#define HAL_ADC_VREF           5.0
+#define HAL_ADC_RESOLUTION    10
+#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch)
+#define HAL_START_ADC(ch)     HAL_adc_start_conversion(ch)
+#define HAL_READ_ADC()        HAL_adc_get_result()
+#define HAL_ADC_READY()       true
+
+void HAL_adc_init();
+void HAL_adc_enable_channel(const uint8_t ch);
+void HAL_adc_start_conversion(const uint8_t ch);
+uint16_t HAL_adc_get_result();
+
+// Reset source
+inline void HAL_clear_reset_source(void) {}
+inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
+
+/* ---------------- Delay in cycles */
+
+#define DELAY_CYCLES(x) Kernel::delayCycles(x)
+#define SYSTEM_YIELD() Kernel::yield()
+
+// Maple Compatibility
+typedef void (*systickCallback_t)(void);
+void systick_attach_callback(systickCallback_t cb);
+extern volatile uint32_t systick_uptime_millis;
+
+// Marlin uses strstr in constexpr context, this is not supported, workaround by defining constexpr versions of the required functions.
+#define strstr(a, b) strstr_constexpr((a), (b))
+
+constexpr inline std::size_t strlen_constexpr(const char* str) {
+  // https://github.com/gcc-mirror/gcc/blob/5c7634a0e5f202935aa6c11b6ea953b8bf80a00a/libstdc%2B%2B-v3/include/bits/char_traits.h#L329
+  if (str != nullptr) {
+    std::size_t i = 0;
+    while (str[i] != '\0') {
+      ++i;
+    }
+
+    return i;
+  }
+
+  return 0;
+}
+
+constexpr inline int strncmp_constexpr(const char* lhs, const char* rhs, std::size_t count) {
+  // https://github.com/gcc-mirror/gcc/blob/13b9cbfc32fe3ac4c81c4dd9c42d141c8fb95db4/libstdc%2B%2B-v3/include/bits/char_traits.h#L655
+  if (lhs == nullptr || rhs == nullptr) {
+    return rhs != nullptr ? -1 : 1;
+  }
+
+  for (std::size_t i = 0; i < count; ++i) {
+    if (lhs[i] != rhs[i]) {
+      return lhs[i] < rhs[i] ? -1 : 1;
+    } else if (lhs[i] == '\0') {
+      return 0;
+    }
+  }
+
+  return 0;
+}
+
+constexpr inline const char* strstr_constexpr(const char* str, const char* target) {
+  // https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c
+  if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) {
+    std::size_t len = strlen_constexpr(target);
+    do {
+      char sc = {};
+      do {
+        if ((sc = *str++) == '\0') {
+          return nullptr;
+        }
+      } while (sc != c);
+    } while (strncmp_constexpr(str, target, len) != 0);
+    --str;
+  }
+
+  return str;
+}
+
+constexpr inline char* strstr_constexpr(char* str, const char* target) {
+  // https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c
+  if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) {
+    std::size_t len = strlen_constexpr(target);
+    do {
+      char sc = {};
+      do {
+        if ((sc = *str++) == '\0') {
+          return nullptr;
+        }
+      } while (sc != c);
+    } while (strncmp_constexpr(str, target, len) != 0);
+    --str;
+  }
+  return str;
+}

Marlin/src/HAL/NATIVE_SIM/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/NATIVE_SIM/fastio.h

@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Fast I/O Routines for X86_64
+ */
+
+#include "../shared/Marduino.h"
+#include <pinmapping.h>
+
+#define SET_DIR_INPUT(IO)     Gpio::setDir(IO, 1)
+#define SET_DIR_OUTPUT(IO)    Gpio::setDir(IO, 0)
+
+#define SET_MODE(IO, mode)    Gpio::setMode(IO, mode)
+
+#define WRITE_PIN_SET(IO)     Gpio::set(IO)
+#define WRITE_PIN_CLR(IO)     Gpio::clear(IO)
+
+#define READ_PIN(IO)          Gpio::get(IO)
+#define WRITE_PIN(IO,V)       Gpio::set(IO, V)
+
+/**
+ * Magic I/O routines
+ *
+ * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
+ *
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ */
+
+/// Read a pin
+#define _READ(IO)             READ_PIN(IO)
+
+/// Write to a pin
+#define _WRITE(IO,V)          WRITE_PIN(IO,V)
+
+/// toggle a pin
+#define _TOGGLE(IO)          _WRITE(IO, !READ(IO))
+
+/// set pin as input
+#define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
+
+/// set pin as output
+#define _SET_OUTPUT(IO)       SET_DIR_OUTPUT(IO)
+
+/// set pin as input with pullup mode
+#define _PULLUP(IO,V)         pinMode(IO, (V) ? INPUT_PULLUP : INPUT)
+
+/// set pin as input with pulldown mode
+#define _PULLDOWN(IO,V)       pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
+
+// hg42: all pins can be input or output (I hope)
+// hg42: undefined pins create compile error (IO, is no pin)
+// hg42: currently not used, but was used by pinsDebug
+
+/// check if pin is an input
+#define _IS_INPUT(IO)         (IO >= 0)
+
+/// check if pin is an output
+#define _IS_OUTPUT(IO)        (IO >= 0)
+
+/// Read a pin wrapper
+#define READ(IO)             _READ(IO)
+
+/// Write to a pin wrapper
+#define WRITE(IO,V)          _WRITE(IO,V)
+
+/// toggle a pin wrapper
+#define TOGGLE(IO)           _TOGGLE(IO)
+
+/// set pin as input wrapper
+#define SET_INPUT(IO)        _SET_INPUT(IO)
+/// set pin as input with pullup wrapper
+#define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
+/// set pin as input with pulldown wrapper
+#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0)
+/// set pin as output wrapper  -  reads the pin and sets the output to that value
+#define SET_OUTPUT(IO)        do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0)
+// set pin as PWM
+#define SET_PWM(IO)           SET_OUTPUT(IO)
+
+/// check if pin is an input wrapper
+#define IS_INPUT(IO)         _IS_INPUT(IO)
+/// check if pin is an output wrapper
+#define IS_OUTPUT(IO)        _IS_OUTPUT(IO)
+
+// Shorthand
+#define OUT_WRITE(IO,V)       do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+
+// digitalRead/Write wrappers
+#define extDigitalRead(IO)    digitalRead(IO)
+#define extDigitalWrite(IO,V) digitalWrite(IO,V)

Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once