Fix SPI TFT for STM32F1/F4

Marlin/src/HAL/STM32/tft/tft_spi.cpp

@@ -31,6 +31,10 @@
 #include "tft_spi.h"
 #include "pinconfig.h"
 
+//#define DEBUG_TFT_IO
+#define DEBUG_OUT ENABLED(DEBUG_TFT_IO)
+#include "../../../core/debug_out.h"
+
 SPI_HandleTypeDef TFT_SPI::SPIx;
 DMA_HandleTypeDef TFT_SPI::DMAtx;
 
@@ -43,8 +47,8 @@ void TFT_SPI::init() {
   if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN),  PinMap_SPI_SCLK)) == NP) return;
   if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return;
 
-  #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
-    if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return;
+  #if PIN_EXISTS(TFT_MISO)
+    if ((TFT_MISO_PIN != TFT_MOSI_PIN) && (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO))) return;
   #endif
 
   SPIx.Instance                = spiInstance;
@@ -76,10 +80,12 @@ void TFT_SPI::init() {
 
   pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK);
   pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI);
-  #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
-    pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO);
+  #if PIN_EXISTS(TFT_MISO)
+    if (TFT_MISO_PIN != TFT_MOSI_PIN) pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO);
   #endif
 
+  //pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN);
+
   #ifdef SPI1_BASE
     if (SPIx.Instance == SPI1) {
       __HAL_RCC_SPI1_CLK_ENABLE();
@@ -151,29 +157,47 @@ void TFT_SPI::dataTransferBegin(uint16_t dataSize) {
   WRITE(TFT_CS_PIN, LOW);
 }
 
-#ifdef TFT_DEFAULT_DRIVER
-  #include "../../../lcd/tft_io/tft_ids.h"
-#endif
+#include "../../../lcd/tft_io/tft_ids.h"
 
 uint32_t TFT_SPI::getID() {
-  uint32_t id;
-  id = readID(LCD_READ_ID);
+  DEBUG_ECHOLNPGM("TFT_SPI::getID()");
+
+  uint32_t id = readID(LCD_READ_ID);
+  #if ENABLED(DEBUG_TFT_IO)
+    char debug_register[3], debug_value[5];
+    sprintf_P(debug_register, PSTR("%02X"), LCD_READ_ID);
+    sprintf_P(debug_value, PSTR("%04X"), uint16_t(id));
+    DEBUG_ECHOLNPGM("  readID(0x", debug_register, ") : 0x", debug_value);
+  #endif
+
   if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) {
     id = readID(LCD_READ_ID4);
-    #ifdef TFT_DEFAULT_DRIVER
-      if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
-        id = TFT_DEFAULT_DRIVER;
+    #if ENABLED(DEBUG_TFT_IO)
+      sprintf_P(debug_register, PSTR("%02X"), LCD_READ_ID4);
+      sprintf_P(debug_value, PSTR("%04X"), uint16_t(id));
+      DEBUG_ECHOLNPGM("  readID(0x", debug_register, ") : 0x", debug_value);
     #endif
-   }
+  }
+
+  #ifdef TFT_DEFAULT_DRIVER
+    if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) {
+      id = TFT_DEFAULT_DRIVER;
+      #if ENABLED(DEBUG_TFT_IO)
+        sprintf_P(debug_value, PSTR("%04X"), uint16_t(id));
+        DEBUG_ECHOLNPGM("  Fallback to TFT_DEFAULT_DRIVER : 0x", debug_value);
+      #endif
+    }
+  #endif
+
   return id;
 }
 
 uint32_t TFT_SPI::readID(const uint16_t inReg) {
   uint32_t data = 0;
   #if PIN_EXISTS(TFT_MISO)
-    const uint32_t oldPrescaler = SPIx.Init.BaudRatePrescaler;
-
+    uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler;
     SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
+
     dataTransferBegin(DATASIZE_8BIT);
     writeReg(inReg);
 
@@ -185,10 +209,8 @@ uint32_t TFT_SPI::readID(const uint16_t inReg) {
         __HAL_SPI_ENABLE(&SPIx);
         SET_BIT(SPIx.Instance->CR1, SPI_CR1_CSTART);
 
-        #if TFT_MISO_PIN != TFT_MOSI_PIN
-          SPIx.Instance->TXDR = 0;
-        #endif
-        while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT)) {}
+        if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) SPIx.Instance->TXDR = 0;
+        while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT));
         data = (data << 8) | SPIx.Instance->RXDR;
         __HAL_SPI_DISABLE(&SPIx);
         __HAL_SPI_CLEAR_EOTFLAG(&SPIx);
@@ -197,19 +219,22 @@ uint32_t TFT_SPI::readID(const uint16_t inReg) {
     #else
       __HAL_SPI_ENABLE(&SPIx);
       for (uint32_t i = 0; i < 4; i++) {
-        #if TFT_MISO_PIN != TFT_MOSI_PIN
-          while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {}
+        if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) {
+          while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE));
           SPIx.Instance->DR = 0;
-        #endif
-        while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_RXNE)) {}
+        }
+        while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_RXNE));
         data = (data << 8) | SPIx.Instance->DR;
       }
     #endif
 
     dataTransferEnd();
-    SPIx.Init.BaudRatePrescaler = oldPrescaler;
+    #if DISABLED(DEBUG_TFT_IO)
+      SPIx.Init.BaudRatePrescaler = BaudRatePrescaler;
+    #endif
   #endif
 
+  DEBUG_ECHOLNPGM("  raw data : ", data);
   return data >> 7;
 }
 
@@ -238,13 +263,13 @@ bool TFT_SPI::isBusy() {
       // Check if SPI data transfer is completed
       if (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_EOT)) return true;
     #else
-      // Check if SPI is idle
-      if (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) return true;
+      // Check if SPI transmit butter is empty and SPI is idle
+      if ((!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) || (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY))) return true;
     #endif
   }
 
   abort();
-  return false;
+  return true;
 }
 
 void TFT_SPI::abort() {
@@ -263,9 +288,7 @@ void TFT_SPI::abort() {
 }
 
 void TFT_SPI::transmit(uint16_t data) {
-  #if TFT_MISO_PIN == TFT_MOSI_PIN
-    SPI_1LINE_TX(&SPIx);
-  #endif
+  if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx);
 
   #ifdef STM32H7xx
     MODIFY_REG(SPIx.Instance->CR2, SPI_CR2_TSIZE, 1);
@@ -274,30 +297,26 @@ void TFT_SPI::transmit(uint16_t data) {
 
     SPIx.Instance->TXDR = data;
 
-    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) {}
+    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT));
 
     __HAL_SPI_CLEAR_EOTFLAG(&SPIx);
     __HAL_SPI_CLEAR_TXTFFLAG(&SPIx);
+    __HAL_SPI_DISABLE(&SPIx);
   #else
     __HAL_SPI_ENABLE(&SPIx);
     SPIx.Instance->DR = data;
-    while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {}
+    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE));   // Wait for data transfer to actually start
+    while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY));    // Wait until SPI is idle
   #endif
 
-  __HAL_SPI_DISABLE(&SPIx);
-
-  #if TFT_MISO_PIN != TFT_MOSI_PIN
-    __HAL_SPI_CLEAR_OVRFLAG(&SPIx);   // Clear overrun flag in 2 Lines communication mode because received data is not read
-  #endif
+  if (SPIx.Init.Direction == SPI_DIRECTION_2LINES) __HAL_SPI_CLEAR_OVRFLAG(&SPIx);  // Clear overrun flag in 2 Lines communication mode because received data is not read
 }
 
 void TFT_SPI::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t count) {
   DMAtx.Init.MemInc = memoryIncrease;
   HAL_DMA_Init(&DMAtx);
 
-  #if TFT_MISO_PIN == TFT_MOSI_PIN
-    SPI_1LINE_TX(&SPIx);
-  #endif
+  if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx);
 
   dataTransferBegin();
 
@@ -324,9 +343,10 @@ void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count)
 
   HAL_DMA_PollForTransfer(&DMAtx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
   #ifdef STM32H7xx
-    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT)) {}
+    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_SR_EOT));
   #else
-    while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {}
+    while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE));
+    while (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY));
   #endif
   abort();
 }
@@ -337,8 +357,7 @@ void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count)
     DMAtx.Init.MemInc = memoryIncrease;
     HAL_DMA_Init(&DMAtx);
 
-    if (TFT_MISO_PIN == TFT_MOSI_PIN)
-      SPI_1LINE_TX(&SPIx);
+    if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_TX(&SPIx);
 
     dataTransferBegin();
 

Marlin/src/lcd/extui/mks_ui/SPI_TFT.cpp

@@ -63,9 +63,7 @@ void TFT::lcdInit() {
   #if PIN_EXISTS(TFT_BACKLIGHT)
     OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
   #endif
-  #if HAS_LOGO_IN_FLASH
-    delay(2000);
-  #endif
+  TERN_(HAS_LOGO_IN_FLASH, delay(2000));
 }
 
 void TFT::lcdClear(uint16_t color) {

Marlin/src/lcd/tft/tft_string.cpp

@@ -58,7 +58,7 @@ void TFT_String::set_font(const uint8_t *font) {
     for (glyph = 0; glyph < EXTRA_GLYPHS; glyph++) glyphs_extra[glyph] = nullptr;
   #endif
 
-  DEBUG_ECHOLNPGM("Format: ",            ((unifont_t *)font_header)->format);
+  DEBUG_ECHOLNPGM("format: ",            ((unifont_t *)font_header)->format);
   DEBUG_ECHOLNPGM("capitalAHeight: ",    ((unifont_t *)font_header)->capitalAHeight);
   DEBUG_ECHOLNPGM("fontStartEncoding: ", ((unifont_t *)font_header)->fontStartEncoding);
   DEBUG_ECHOLNPGM("fontEndEncoding: ",   ((unifont_t *)font_header)->fontEndEncoding);

Marlin/src/lcd/tft_io/tft_io.cpp

@@ -111,37 +111,37 @@ void TFT_IO::initTFT() {
     switch (lcd_id) {
       case LTDC_RGB:
         break;
-      case ST7796:    // ST7796S    480x320
-        DEBUG_ECHO_MSG(" ST7796S");
+      case ST7796:
+        DEBUG_ECHO_MSG(" ST7796S");       // 480x320
         write_esc_sequence(st7796s_init);
         break;
-      case ST7789:    // ST7789V    320x240
-        DEBUG_ECHO_MSG(" ST7789V");
+      case ST7789:
+        DEBUG_ECHO_MSG(" ST7789V");       // 320x240
         write_esc_sequence(st7789v_init);
         break;
-      case SSD1963:    // SSD1963
+      case SSD1963:
         DEBUG_ECHO_MSG(" SSD1963");
         write_esc_sequence(ssd1963_init);
         break;
-      case ST7735:    // ST7735     160x128
-        DEBUG_ECHO_MSG(" ST7735");
+      case ST7735:
+        DEBUG_ECHO_MSG(" ST7735");        // 160x128
         write_esc_sequence(st7735_init);
         break;
-      case R61505:    // R61505U    320x240
-        DEBUG_ECHO_MSG(" R61505U");
+      case R61505:
+        DEBUG_ECHO_MSG(" R61505U");       // 320x240
         write_esc_sequence(r61505_init);
         break;
-      case ILI9328:   // ILI9328    320x240
-        DEBUG_ECHO_MSG(" ILI9328");
+      case ILI9328:
+        DEBUG_ECHO_MSG(" ILI9328");       // 320x240
         write_esc_sequence(ili9328_init);
         break;
-      case ILI9341:   // ILI9341    320x240
-        DEBUG_ECHO_MSG(" ILI9341");
+      case ILI9341:
+        DEBUG_ECHO_MSG(" ILI9341");       // 320x240
         write_esc_sequence(ili9341_init);
         break;
-      case ILI9488:   // ILI9488    480x320
-      case ILI9488_ID1: // 0x8066 ILI9488    480x320
-        DEBUG_ECHO_MSG(" ILI9488");
+      case ILI9488:
+      case ILI9488_ID1:
+        DEBUG_ECHO_MSG(" ILI9488");       // 480x320
         write_esc_sequence(ili9488_init);
         break;
       default:

Marlin/src/lcd/tft_io/tft_io.h

@@ -38,7 +38,7 @@
 #endif
 
 #ifndef TFT_DRIVER
-  #define TFT_DRIVER    AUTO
+  #define TFT_DRIVER AUTO
 #endif
 
 #define ESC_REG(x)   0xFFFF, 0x00FF & (uint16_t)x