Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Add missing pins_FYSETC_SPIDER_KING407.h #26461

Merged
merged 4 commits into from
Nov 25, 2023
Merged

Add missing pins_FYSETC_SPIDER_KING407.h #26461

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
4 commits
Select commit Hold shift + click to select a range
751bd78
add missing pins.h
ellensp Nov 25, 2023
3701ed7
remove tailing spaces
ellensp Nov 25, 2023
e31b7ae
update to new pin names
ellensp Nov 25, 2023
dcaa221
fix, clean up
thinkyhead Nov 25, 2023
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
12 changes: 6 additions & 6 deletions Marlin/src/pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -82,14 +82,14 @@
// TMC2130 on SPI
// SPI Pins (Shared for all drivers)
#if ENABLED(TMC_USE_SW_SPI) // Shared with EXP2
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB3
#ifndef TMC_SPI_SCK
#define TMC_SPI_SCK PB3
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB4
#ifndef TMC_SPI_MISO
#define TMC_SPI_MISO PB4
#endif
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PB5
#ifndef TMC_SPI_MOSI
#define TMC_SPI_MOSI PB5
#endif
#endif

Expand Down
371 changes: 371 additions & 0 deletions Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_KING407.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,371 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

#include "env_validate.h"

#if HOTENDS > 5 || E_STEPPERS > 5
#error "FYSETC SPIDER KING supports up to 5 hotends / E-steppers."
#endif

#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "FYSETC SPIDER KING"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
#endif

//
// EEPROM Emulation
//
#if NO_EEPROM_SELECTED
#undef NO_EEPROM_SELECTED
//#define FLASH_EEPROM_EMULATION
//#define SRAM_EEPROM_EMULATION
#define I2C_EEPROM
#endif

#if ENABLED(I2C_EEPROM)
#define I2C_EEPROM
#define I2C_SCL_PIN PF1
#define I2C_SDA_PIN PF0
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif

//
// Servos
//
#define SERVO0_PIN PA1

//
// Software SPI pins for TMC2130 stepper drivers
//
#define TMC_USE_SW_SPI
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SPI_MOSI
#define TMC_SPI_MOSI PE14
#endif
#ifndef TMC_SPI_MISO
#define TMC_SPI_MISO PE13
#endif
#ifndef TMC_SPI_SCK
#define TMC_SPI_SCK PE12
#endif
#endif

//
// Limit Switches
//
#define X_MIN_PIN PC5
#define Y_MIN_PIN PC4
#define Z_MIN_PIN PB6
#define X_MAX_PIN PB5
#define Y_MAX_PIN PF13
#define Z_MAX_PIN PF14

#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PA0
#endif

//
// Steppers
//
#define X_STEP_PIN PG7 // "MOT1"
#define X_DIR_PIN PG6
#define X_ENABLE_PIN PE11
#define X_CS_PIN PD2

#define X2_STEP_PIN PD11 // "MOT2"
#define X2_DIR_PIN PD10
#define X2_ENABLE_PIN PG10
#define X2_CS_PIN PE15

#define Y_STEP_PIN PG14 // "MOT3"
#define Y_DIR_PIN PG12
#define Y_ENABLE_PIN PG15
#define Y_CS_PIN PD8

#define Z_STEP_PIN PD4 // "MOT4"
#define Z_DIR_PIN PD6
#define Z_ENABLE_PIN PD5
#define Z_CS_PIN PD7

#define Z2_STEP_PIN PE5 // "MOT5"
#define Z2_DIR_PIN PC13
#define Z2_ENABLE_PIN PE6
#define Z2_CS_PIN PC14

#define E0_STEP_PIN PE3 // "MOT6"
#define E0_DIR_PIN PE4
#define E0_ENABLE_PIN PE2
#define E0_CS_PIN PC15

#define E1_STEP_PIN PG13 // "MOT7"
#define E1_DIR_PIN PG8
#define E1_ENABLE_PIN PG9
#define E1_CS_PIN PG3

#define E2_STEP_PIN PE1 // "MOT8"
#define E2_DIR_PIN PE0
#define E2_ENABLE_PIN PB2
#define E2_CS_PIN PD9

#define E3_STEP_PIN PF4 // "MOT9"
#define E3_DIR_PIN PF3
#define E3_ENABLE_PIN PF2
#define E3_CS_PIN PF5

#define E4_STEP_PIN PF15 // "MOT10"
#define E4_DIR_PIN PG0
#define E4_ENABLE_PIN PG5
#define E4_CS_PIN PG11

#if HAS_TMC_UART
//
// TMC2208/TMC2209 stepper drivers
//
#define X_SERIAL_TX_PIN PD2
#define X_SERIAL_RX_PIN PD2

#define X2_SERIAL_TX_PIN PE15
#define X2_SERIAL_RX_PIN PE15

#define Y_SERIAL_TX_PIN PD8
#define Y_SERIAL_RX_PIN PD8

#define Z_SERIAL_TX_PIN PD7
#define Z_SERIAL_RX_PIN PD7

#define Z2_SERIAL_TX_PIN PC14
#define Z2_SERIAL_RX_PIN PC14

#define E0_SERIAL_TX_PIN PC15
#define E0_SERIAL_RX_PIN PC15

#define E1_SERIAL_TX_PIN PG3
#define E1_SERIAL_RX_PIN PG3

#define E2_SERIAL_TX_PIN PD9
#define E2_SERIAL_RX_PIN PD9

#define E3_SERIAL_TX_PIN PF5
#define E3_SERIAL_RX_PIN PF5

#define E4_SERIAL_TX_PIN PG11
#define E4_SERIAL_RX_PIN PG11

// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN PC1
#define TEMP_1_PIN PF9
#define TEMP_2_PIN PC3
#define TEMP_3_PIN PC2
#define TEMP_4_PIN PC0
//#define TEMP_CHAMBER_PIN PC0
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN PF10
#endif

//
// Heaters / Fans
//
#ifndef HEATER_0_PIN
#define HEATER_0_PIN PB4
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN PB0
#endif
#ifndef HEATER_2_PIN
#define HEATER_2_PIN PD13
#endif
#ifndef HEATER_3_PIN
#define HEATER_3_PIN PC8
#endif
#ifndef HEATER_4_PIN
#define HEATER_4_PIN PA15
#endif
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN PE10
#endif

#ifndef FAN0_PIN
#define FAN0_PIN PE8
#endif
#ifndef FAN1_PIN
#define FAN1_PIN PE9
#endif
#ifndef FAN2_PIN
#define FAN2_PIN PD15
#endif
#ifndef FAN3_PIN
#define FAN3_PIN PD12
#endif
#ifndef FAN4_PIN
#define FAN4_PIN PD14
#endif

/**
* ------ ------ ------
* PA2 |10 9 | PA3 PA6 |10 9 | PA5 PC9 |10 9 | PA8
* -1 | 8 7 | PB10 PC6 | 8 7 | PA4 PC12 | 8 7 | PD0
* PA6 6 5 | PA7 PC7 | 6 5 PA7 PC10 | 6 5 PC11
* PA5 | 4 3 | PA4 PB10 | 4 3 | RESET PG4 | 4 3 | PE7
* GND | 2 1 | 5V GND | 2 1 | 5V GND | 2 1 | 5V
* ------ ------ ------
* EXP3 EXP2 EXP1
*/
#define EXP1_03_PIN PE7 // LCD_D7
#define EXP1_04_PIN PG4 // LCD_D6
#define EXP1_05_PIN PC11 // LCD_D5
#define EXP1_06_PIN PC10 // LCD_D4
#define EXP1_07_PIN PD0 // LCD_RS
#define EXP1_08_PIN PC12 // LCD_EN
#define EXP1_09_PIN PA8 // BTN_ENC
#define EXP1_10_PIN PC9 // BEEP

#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PB10 // CD
#define EXP2_05_PIN PA7 // MOSI
#define EXP2_06_PIN PC7 // BTN_EN2
#define EXP2_07_PIN PA4 // SS
#define EXP2_08_PIN PC6 // BTN_EN1
#define EXP2_09_PIN PA5 // SCK
#define EXP2_10_PIN PA6 // MISO

#define EXP3_03_PIN PA4 // SS
#define EXP3_04_PIN PA5 // SCK
#define EXP3_05_PIN PA7 // MOSI
#define EXP3_06_PIN PA6 // MISO
#define EXP3_07_PIN PB10 // CD
#define EXP3_08_PIN -1 // 3V3
#define EXP3_09_PIN PA3 // LCD_RX/RX
#define EXP3_10_PIN PA2 // LCD_TX/TX

//
// SPI / SD Card
//
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN

#define SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN

//
// LCD / Controller
//
#if ENABLED(FYSETC_242_OLED_12864)

#define BEEPER_PIN EXP2_08_PIN

#define BTN_EN1 EXP1_10_PIN
#define BTN_EN2 EXP1_03_PIN
#define BTN_ENC EXP1_09_PIN

#define LCD_PINS_DC EXP1_05_PIN
#define LCD_PINS_RS EXP2_06_PIN // LCD_RST
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_MOSI EXP1_06_PIN
#define DOGLCD_SCK EXP1_08_PIN
#define DOGLCD_A0 LCD_PINS_DC
#define FORCE_SOFT_SPI

//#define KILL_PIN -1 // NC
#define NEOPIXEL_PIN EXP1_04_PIN

#elif HAS_WIRED_LCD

#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN

#define LCD_PINS_RS EXP1_07_PIN

#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN

#define LCD_SDSS EXP2_07_PIN

#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN

#if ENABLED(FYSETC_MINI_12864)
// See https://wiki.fysetc.com/Mini12864_Panel
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#if ENABLED(FYSETC_GENERIC_12864_1_1)
#define LCD_BACKLIGHT_PIN EXP1_04_PIN
#endif
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_05_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_04_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_03_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_05_PIN
#endif
#endif

#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif

#endif // HAS_WIRED_LCD

// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#define BOARD_ST7920_DELAY_1 96
#define BOARD_ST7920_DELAY_2 48
#define BOARD_ST7920_DELAY_3 640
#endif

//
// Wifi module
//
#define ESP_WIFI_MODULE_COM 1 // Set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Use the same BAUDRATE as SERIAL_PORT or SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PB3
#define ESP_WIFI_MODULE_ENABLE_PIN PD1 // PC8
#define ESP_WIFI_MODULE_GPIO0_PIN PG2 // PB4
#define ESP_WIFI_MODULE_GPIO4_PIN PG1 // PB7

//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PD3
#endif
Loading